PCA9633: 4-Channel RGB¶
Overview¶
This sample controls 4 LEDs connected to a PCA9633 driver, using the following pattern:
turn on LEDs
turn off LEDs
set the brightness to 50%
turn off LEDs
blink the LEDs
turn off LEDs
Building and Running¶
Build the application for the ST STM32373C Evaluation board, and connect a PCA9633 LED driver on the bus I2C-1 at the address 0x62.
west build -b stm32373c_eval samples/drivers/led_pca9633
For flashing the application, refer to the Flashing section of the ST STM32373C Evaluation board documentation.