nxp,kinetis-acmp¶
Vendor: NXP Semiconductors
Description¶
NXP Kinetis Analog Comparator (ACMP)
Properties¶
Properties not inherited from the base binding file.
Name |
Type |
Details |
|---|---|---|
|
|
Make the comparator output (CMP0) available on a packaged pin.
|
|
|
Use the unfiltered comparator output for CMP0.
|
|
|
Enable high speed comparison mode.
|
|
|
Enable external sample signal as clock input.
|
|
|
Filter sample count (0 to 7).
|
|
|
Filter sample period in bus clock cycles (0 to 255).
|
|
|
Enable windowing mode.
|
|
|
Constant value: |
Deprecated properties not inherited from the base binding file.
(None)
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “nxp,kinetis-acmp” compatible.
Name |
Type |
Details |
|---|---|---|
|
|
interrupts for device
This property is required. See Important properties for more information. |
|
|
Human readable string describing the device (used as device_get_binding() argument)
This property is required. See Important properties for more information. |
|
|
register space
This property is required. See Important properties for more information. |
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
name of each register space
|
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
Clock gate information
|
|
|
name of each clock
|
|
|
number of address cells in reg property
|
|
|
number of size cells in reg property
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|
Specifier cell names¶
io-channel cells: positive, negative