WDT HAL¶

group nrf_wdt_hal

Hardware access layer for managing the Watchdog Timer (WDT) peripheral.

Defines

NRF_WDT_CHANNEL_NUMBER¶: Number of WDT channels.

NRF_WDT_RR_VALUE¶: WDT register reload value.

Enums

enum nrf_wdt_task_t¶

WDT tasks.

Values:

enumerator NRF_WDT_TASK_START¶: Task for starting WDT.

enum nrf_wdt_event_t¶

WDT events.

Values:

enumerator NRF_WDT_EVENT_TIMEOUT¶: Event from WDT time-out.

enum nrf_wdt_behaviour_t¶

WDT behavior in the SLEEP or HALT CPU modes.

Values:

enumerator NRF_WDT_BEHAVIOUR_RUN_SLEEP¶: WDT will run when CPU is in SLEEP mode.

enumerator NRF_WDT_BEHAVIOUR_RUN_HALT¶: WDT will run when CPU is in HALT mode.

enumerator NRF_WDT_BEHAVIOUR_RUN_SLEEP_HALT¶: WDT will run when CPU is in SLEEP or HALT mode.

enumerator NRF_WDT_BEHAVIOUR_PAUSE_SLEEP_HALT¶: WDT will be paused when CPU is in SLEEP or HALT mode.

enum nrf_wdt_rr_register_t¶

WDT reload request registers.

Values:

enumerator NRF_WDT_RR0¶: Reload request register 0.

enumerator NRF_WDT_RR1¶: Reload request register 1.

enumerator NRF_WDT_RR2¶: Reload request register 2.

enumerator NRF_WDT_RR3¶: Reload request register 3.

enumerator NRF_WDT_RR4¶: Reload request register 4.

enumerator NRF_WDT_RR5¶: Reload request register 5.

enumerator NRF_WDT_RR6¶: Reload request register 6.

enumerator NRF_WDT_RR7¶: Reload request register 7.

enum nrf_wdt_int_mask_t¶

WDT interrupts.

Values:

enumerator NRF_WDT_INT_TIMEOUT_MASK¶: WDT interrupt from time-out event.

Functions

NRF_STATIC_INLINE void nrf_wdt_behaviour_set(NRF_WDT_Type *p_reg, nrf_wdt_behaviour_t behaviour)¶

Function for configuring the watchdog behavior when the CPU is sleeping or halted.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
behaviour – [in] Watchdog behavior when CPU is in SLEEP or HALT mode.

NRF_STATIC_INLINE void nrf_wdt_task_trigger(NRF_WDT_Type *p_reg, nrf_wdt_task_t task)¶

Function for starting the WDT task.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
task – [in] Task.

NRF_STATIC_INLINE void nrf_wdt_event_clear(NRF_WDT_Type *p_reg, nrf_wdt_event_t event)¶

Function for clearing the WDT event register.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
event – [in] Event.

NRF_STATIC_INLINE bool nrf_wdt_event_check(NRF_WDT_Type const *p_reg, nrf_wdt_event_t event)¶

Function for retrieving the state of the WDT event.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
event – [in] Event to be checked.

Returns true

The event has been generated.

Returns false

The event has not been generated.

NRF_STATIC_INLINE void nrf_wdt_int_enable(NRF_WDT_Type *p_reg, uint32_t mask)¶

Function for enabling the specified interrupt.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
mask – [in] Mask of interrupts to be enabled.

NRF_STATIC_INLINE uint32_t nrf_wdt_int_enable_check(NRF_WDT_Type const *p_reg, uint32_t mask)¶

Function for checking if the specified interrupts are enabled.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
mask – [in] Mask of interrupts to be checked.

Returns

Mask of enabled interrupts.

NRF_STATIC_INLINE void nrf_wdt_int_disable(NRF_WDT_Type *p_reg, uint32_t mask)¶

Function for disabling a specific interrupt.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
mask – [in] Mask of interrupts to be disabled.

NRF_STATIC_INLINE void nrf_wdt_subscribe_set(NRF_WDT_Type *p_reg, nrf_wdt_task_t task, uint8_t channel)¶

Function for setting the subscribe configuration for a given WDT task.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
task – [in] Task for which to set the configuration.
channel – [in] Channel through which to subscribe events.

NRF_STATIC_INLINE void nrf_wdt_subscribe_clear(NRF_WDT_Type *p_reg, nrf_wdt_task_t task)¶

Function for clearing the subscribe configuration for a given WDT task.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
task – [in] Task for which to clear the configuration.

NRF_STATIC_INLINE void nrf_wdt_publish_set(NRF_WDT_Type *p_reg, nrf_wdt_event_t event, uint8_t channel)¶

Function for setting the publish configuration for a given WDT event.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
event – [in] Event for which to set the configuration.
channel – [in] Channel through which to publish the event.

NRF_STATIC_INLINE void nrf_wdt_publish_clear(NRF_WDT_Type *p_reg, nrf_wdt_event_t event)¶

Function for clearing the publish configuration for a given WDT event.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
event – [in] Event for which to clear the configuration.

NRF_STATIC_INLINE uint32_t nrf_wdt_task_address_get(NRF_WDT_Type const *p_reg, nrf_wdt_task_t task)¶

Function for returning the address of a specific WDT task register.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
task – [in] Task.

Returns

Address of requested task register

NRF_STATIC_INLINE uint32_t nrf_wdt_event_address_get(NRF_WDT_Type const *p_reg, nrf_wdt_event_t event)¶

Function for returning the address of a specific WDT event register.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
event – [in] Event.

Returns

Address of requested event register

NRF_STATIC_INLINE bool nrf_wdt_started(NRF_WDT_Type const *p_reg)¶

Function for retrieving the watchdog status.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.

Returns true

The watchdog is started.

Returns false

The watchdog is not started.

NRF_STATIC_INLINE bool nrf_wdt_request_status(NRF_WDT_Type const *p_reg, nrf_wdt_rr_register_t rr_register)¶

Function for retrieving the watchdog reload request status.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
rr_register – [in] Reload request register to be checked.

Returns true

Reload request is running.

Returns false

No reload requests are running.

NRF_STATIC_INLINE void nrf_wdt_reload_value_set(NRF_WDT_Type *p_reg, uint32_t reload_value)¶

Function for setting the watchdog reload value.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
reload_value – [in] Watchdog counter initial value.

NRF_STATIC_INLINE uint32_t nrf_wdt_reload_value_get(NRF_WDT_Type const *p_reg)¶

Function for retrieving the watchdog reload value.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.

Returns

Reload value.

NRF_STATIC_INLINE void nrf_wdt_reload_request_enable(NRF_WDT_Type *p_reg, nrf_wdt_rr_register_t rr_register)¶

Function for enabling a specific reload request register.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
rr_register – [in] Reload request register to be enabled.

NRF_STATIC_INLINE void nrf_wdt_reload_request_disable(NRF_WDT_Type *p_reg, nrf_wdt_rr_register_t rr_register)¶

Function for disabling a specific reload request register.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
rr_register – [in] Reload request register to be disabled.

NRF_STATIC_INLINE bool nrf_wdt_reload_request_is_enabled(NRF_WDT_Type const *p_reg, nrf_wdt_rr_register_t rr_register)¶

Function for retrieving the status of a specific reload request register.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
rr_register – [in] Reload request register to be checked.

Returns true

The reload request register is enabled.

Returns false

The reload request register is not enabled.

NRF_STATIC_INLINE void nrf_wdt_reload_request_set(NRF_WDT_Type *p_reg, nrf_wdt_rr_register_t rr_register)¶

Function for setting a specific reload request register.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
rr_register – [in] Reload request register to set.