UARTE HAL¶
-
group
nrf_uarte_hal
Hardware access layer for managing the UARTE peripheral.
Enums
-
enum
nrf_uarte_task_t
¶ UARTE tasks.
Values:
-
enumerator
NRF_UARTE_TASK_STARTRX
¶ Start UART receiver.
-
enumerator
NRF_UARTE_TASK_STOPRX
¶ Stop UART receiver.
-
enumerator
NRF_UARTE_TASK_STARTTX
¶ Start UART transmitter.
-
enumerator
NRF_UARTE_TASK_STOPTX
¶ Stop UART transmitter.
-
enumerator
NRF_UARTE_TASK_FLUSHRX
¶ Flush RX FIFO in RX buffer.
-
enumerator
-
enum
nrf_uarte_event_t
¶ UARTE events.
Values:
-
enumerator
NRF_UARTE_EVENT_CTS
¶ CTS is activated.
-
enumerator
NRF_UARTE_EVENT_NCTS
¶ CTS is deactivated.
-
enumerator
NRF_UARTE_EVENT_RXDRDY
¶ Data received in RXD (but potentially not yet transferred to Data RAM).
-
enumerator
NRF_UARTE_EVENT_ENDRX
¶ Receive buffer is filled up.
-
enumerator
NRF_UARTE_EVENT_TXDRDY
¶ Data sent from TXD.
-
enumerator
NRF_UARTE_EVENT_ENDTX
¶ Last TX byte transmitted.
-
enumerator
NRF_UARTE_EVENT_ERROR
¶ Error detected.
-
enumerator
NRF_UARTE_EVENT_RXTO
¶ Receiver timeout.
-
enumerator
NRF_UARTE_EVENT_RXSTARTED
¶ Receiver has started.
-
enumerator
NRF_UARTE_EVENT_TXSTARTED
¶ Transmitter has started.
-
enumerator
NRF_UARTE_EVENT_TXSTOPPED
¶ Transmitted stopped.
-
enumerator
-
enum
nrf_uarte_short_t
¶ Types of UARTE shortcuts.
Values:
-
enumerator
NRF_UARTE_SHORT_ENDRX_STARTRX
¶ Shortcut between ENDRX event and STARTRX task.
-
enumerator
NRF_UARTE_SHORT_ENDRX_STOPRX
¶ Shortcut between ENDRX event and STOPRX task.
-
enumerator
-
enum
nrf_uarte_int_mask_t
¶ UARTE interrupts.
Values:
-
enumerator
NRF_UARTE_INT_CTS_MASK
¶ Interrupt on CTS event.
-
enumerator
NRF_UARTE_INT_NCTS_MASK
¶ Interrupt on NCTS event.
-
enumerator
NRF_UARTE_INT_RXDRDY_MASK
¶ Interrupt on RXDRDY event.
-
enumerator
NRF_UARTE_INT_ENDRX_MASK
¶ Interrupt on ENDRX event.
-
enumerator
NRF_UARTE_INT_TXDRDY_MASK
¶ Interrupt on TXDRDY event.
-
enumerator
NRF_UARTE_INT_ENDTX_MASK
¶ Interrupt on ENDTX event.
-
enumerator
NRF_UARTE_INT_ERROR_MASK
¶ Interrupt on ERROR event.
-
enumerator
NRF_UARTE_INT_RXTO_MASK
¶ Interrupt on RXTO event.
-
enumerator
NRF_UARTE_INT_RXSTARTED_MASK
¶ Interrupt on RXSTARTED event.
-
enumerator
NRF_UARTE_INT_TXSTARTED_MASK
¶ Interrupt on TXSTARTED event.
-
enumerator
NRF_UARTE_INT_TXSTOPPED_MASK
¶ Interrupt on TXSTOPPED event.
-
enumerator
-
enum
nrf_uarte_baudrate_t
¶ Baudrates supported by UARTE.
Values:
-
enumerator
NRF_UARTE_BAUDRATE_1200
¶ 1200 baud.
-
enumerator
NRF_UARTE_BAUDRATE_2400
¶ 2400 baud.
-
enumerator
NRF_UARTE_BAUDRATE_4800
¶ 4800 baud.
-
enumerator
NRF_UARTE_BAUDRATE_9600
¶ 9600 baud.
-
enumerator
NRF_UARTE_BAUDRATE_14400
¶ 14400 baud.
-
enumerator
NRF_UARTE_BAUDRATE_19200
¶ 19200 baud.
-
enumerator
NRF_UARTE_BAUDRATE_28800
¶ 28800 baud.
-
enumerator
NRF_UARTE_BAUDRATE_31250
¶ 31250 baud.
-
enumerator
NRF_UARTE_BAUDRATE_38400
¶ 38400 baud.
-
enumerator
NRF_UARTE_BAUDRATE_56000
¶ 56000 baud.
-
enumerator
NRF_UARTE_BAUDRATE_57600
¶ 57600 baud.
-
enumerator
NRF_UARTE_BAUDRATE_76800
¶ 76800 baud.
-
enumerator
NRF_UARTE_BAUDRATE_115200
¶ 115200 baud.
-
enumerator
NRF_UARTE_BAUDRATE_230400
¶ 230400 baud.
-
enumerator
NRF_UARTE_BAUDRATE_250000
¶ 250000 baud.
-
enumerator
NRF_UARTE_BAUDRATE_460800
¶ 460800 baud.
-
enumerator
NRF_UARTE_BAUDRATE_921600
¶ 921600 baud.
-
enumerator
NRF_UARTE_BAUDRATE_1000000
¶ 1000000 baud.
-
enumerator
-
enum
nrf_uarte_error_mask_t
¶ Types of UARTE error masks.
Values:
-
enumerator
NRF_UARTE_ERROR_OVERRUN_MASK
¶ Overrun error.
-
enumerator
NRF_UARTE_ERROR_PARITY_MASK
¶ Parity error.
-
enumerator
NRF_UARTE_ERROR_FRAMING_MASK
¶ Framing error.
-
enumerator
NRF_UARTE_ERROR_BREAK_MASK
¶ Break error.
-
enumerator
-
enum
nrf_uarte_parity_t
¶ Types of UARTE parity modes.
Values:
-
enumerator
NRF_UARTE_PARITY_EXCLUDED
¶ Parity excluded.
-
enumerator
NRF_UARTE_PARITY_INCLUDED
¶ Parity included.
-
enumerator
-
enum
nrf_uarte_hwfc_t
¶ Types of UARTE flow control modes.
Values:
-
enumerator
NRF_UARTE_HWFC_DISABLED
¶ Hardware flow control disabled.
-
enumerator
NRF_UARTE_HWFC_ENABLED
¶ Hardware flow control enabled.
-
enumerator
Functions
-
NRF_STATIC_INLINE void
nrf_uarte_event_clear
(NRF_UARTE_Type *p_reg, nrf_uarte_event_t event)¶ Function for clearing a specific UARTE event.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
event – [in] Event to clear.
-
NRF_STATIC_INLINE bool
nrf_uarte_event_check
(NRF_UARTE_Type const *p_reg, nrf_uarte_event_t event)¶ Function for retrieving the state of the UARTE event.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
event – [in] Event to be checked.
- Returns true
The event has been generated.
- Returns false
The event has not been generated.
-
NRF_STATIC_INLINE uint32_t
nrf_uarte_event_address_get
(NRF_UARTE_Type const *p_reg, nrf_uarte_event_t event)¶ Function for returning the address of the specified UARTE event register.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
event – [in] The specified event.
- Returns
Address of specified event register.
-
NRF_STATIC_INLINE void
nrf_uarte_shorts_enable
(NRF_UARTE_Type *p_reg, uint32_t mask)¶ Function for enabling UARTE shortcuts.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
mask – [in] Shortcuts to be enabled.
-
NRF_STATIC_INLINE void
nrf_uarte_shorts_disable
(NRF_UARTE_Type *p_reg, uint32_t mask)¶ Function for disabling UARTE shortcuts.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
mask – [in] Shortcuts to be disabled.
-
NRF_STATIC_INLINE void
nrf_uarte_int_enable
(NRF_UARTE_Type *p_reg, uint32_t mask)¶ Function for enabling UARTE interrupts.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
mask – [in] Mask of interrupts to be enabled.
-
NRF_STATIC_INLINE uint32_t
nrf_uarte_int_enable_check
(NRF_UARTE_Type const *p_reg, uint32_t mask)¶ Function for checking if the specified interrupts are enabled.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
mask – [in] Mask of interrupts to be checked.
- Returns
Mask of enabled interrupts.
-
NRF_STATIC_INLINE void
nrf_uarte_int_disable
(NRF_UARTE_Type *p_reg, uint32_t mask)¶ Function for disabling the specified interrupts.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
mask – [in] Mask of interrupts to be disabled.
-
NRF_STATIC_INLINE void
nrf_uarte_subscribe_set
(NRF_UARTE_Type *p_reg, nrf_uarte_task_t task, uint8_t channel)¶ Function for setting the subscribe configuration for a given UARTE task.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
task – [in] Task for which to set the configuration.
channel – [in] Channel through which to subscribe events.
-
NRF_STATIC_INLINE void
nrf_uarte_subscribe_clear
(NRF_UARTE_Type *p_reg, nrf_uarte_task_t task)¶ Function for clearing the subscribe configuration for a given UARTE task.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
task – [in] Task for which to clear the configuration.
-
NRF_STATIC_INLINE void
nrf_uarte_publish_set
(NRF_UARTE_Type *p_reg, nrf_uarte_event_t event, uint8_t channel)¶ Function for setting the publish configuration for a given UARTE event.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
event – [in] Event for which to set the configuration.
channel – [in] Channel through which to publish the event.
-
NRF_STATIC_INLINE void
nrf_uarte_publish_clear
(NRF_UARTE_Type *p_reg, nrf_uarte_event_t event)¶ Function for clearing the publish configuration for a given UARTE event.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
event – [in] Event for which to clear the configuration.
-
NRF_STATIC_INLINE uint32_t
nrf_uarte_errorsrc_get_and_clear
(NRF_UARTE_Type *p_reg)¶ Function for getting error source mask. Function is clearing error source flags after reading.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
- Returns
Mask with error source flags.
-
NRF_STATIC_INLINE void
nrf_uarte_enable
(NRF_UARTE_Type *p_reg)¶ Function for enabling UARTE.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
-
NRF_STATIC_INLINE void
nrf_uarte_disable
(NRF_UARTE_Type *p_reg)¶ Function for disabling UARTE.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
-
NRF_STATIC_INLINE void
nrf_uarte_txrx_pins_set
(NRF_UARTE_Type *p_reg, uint32_t pseltxd, uint32_t pselrxd)¶ Function for configuring TX/RX pins.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
pseltxd – [in] TXD pin number.
pselrxd – [in] RXD pin number.
-
NRF_STATIC_INLINE void
nrf_uarte_txrx_pins_disconnect
(NRF_UARTE_Type *p_reg)¶ Function for disconnecting TX/RX pins.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
-
NRF_STATIC_INLINE uint32_t
nrf_uarte_tx_pin_get
(NRF_UARTE_Type const *p_reg)¶ Function for getting TX pin selection.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
- Returns
TX pin selection.
-
NRF_STATIC_INLINE uint32_t
nrf_uarte_rx_pin_get
(NRF_UARTE_Type const *p_reg)¶ Function for getting RX pin selection.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
- Returns
RX pin selection.
-
NRF_STATIC_INLINE uint32_t
nrf_uarte_rts_pin_get
(NRF_UARTE_Type const *p_reg)¶ Function for getting RTS pin selection.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
- Returns
RTS pin selection.
-
NRF_STATIC_INLINE uint32_t
nrf_uarte_cts_pin_get
(NRF_UARTE_Type const *p_reg)¶ Function for getting CTS pin selection.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
- Returns
CTS pin selection.
-
NRF_STATIC_INLINE void
nrf_uarte_hwfc_pins_set
(NRF_UARTE_Type *p_reg, uint32_t pselrts, uint32_t pselcts)¶ Function for configuring flow control pins.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
pselrts – [in] RTS pin number.
pselcts – [in] CTS pin number.
-
NRF_STATIC_INLINE void
nrf_uarte_hwfc_pins_disconnect
(NRF_UARTE_Type *p_reg)¶ Function for disconnecting flow control pins.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
-
NRF_STATIC_INLINE void
nrf_uarte_task_trigger
(NRF_UARTE_Type *p_reg, nrf_uarte_task_t task)¶ Function for starting an UARTE task.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
task – [in] Task.
-
NRF_STATIC_INLINE uint32_t
nrf_uarte_task_address_get
(NRF_UARTE_Type const *p_reg, nrf_uarte_task_t task)¶ Function for returning the address of the specified task register.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
task – [in] Task.
- Returns
Task address.
-
NRF_STATIC_INLINE void
nrf_uarte_configure
(NRF_UARTE_Type *p_reg, nrf_uarte_config_t const *p_cfg)¶ Function for configuring UARTE.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
p_cfg – [in] Pointer to UARTE settings structure.
-
NRF_STATIC_INLINE void
nrf_uarte_baudrate_set
(NRF_UARTE_Type *p_reg, nrf_uarte_baudrate_t baudrate)¶ Function for setting UARTE baud rate.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
baudrate – [in] Baud rate.
-
NRF_STATIC_INLINE void
nrf_uarte_tx_buffer_set
(NRF_UARTE_Type *p_reg, uint8_t const *p_buffer, size_t length)¶ Function for setting the transmit buffer.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
p_buffer – [in] Pointer to the buffer with data to send.
length – [in] Maximum number of data bytes to transmit.
-
NRF_STATIC_INLINE uint32_t
nrf_uarte_tx_amount_get
(NRF_UARTE_Type const *p_reg)¶ Function for getting number of bytes transmitted in the last transaction.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
- Returns Amount
of bytes transmitted.
-
NRF_STATIC_INLINE void
nrf_uarte_rx_buffer_set
(NRF_UARTE_Type *p_reg, uint8_t *p_buffer, size_t length)¶ Function for setting the receive buffer.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
p_buffer – [in] Pointer to the buffer for received data.
length – [in] Maximum number of data bytes to receive.
-
NRF_STATIC_INLINE uint32_t
nrf_uarte_rx_amount_get
(NRF_UARTE_Type const *p_reg)¶ Function for getting number of bytes received in the last transaction.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
- Returns Amount
of bytes received.
-
struct
nrf_uarte_config_t
¶ - #include <nrf_uarte.h>
Structure for UARTE transmission configuration.
Public Members
-
nrf_uarte_hwfc_t
hwfc
¶ Flow control configuration.
-
nrf_uarte_parity_t
parity
¶ Parity configuration.
-
nrf_uarte_stop_t
stop
¶ Stop bits.
-
nrf_uarte_paritytype_t
paritytype
¶ Parity type.
-
nrf_uarte_hwfc_t
-
enum