NFCT HAL¶
-
group
nrf_nfct_hal
Hardware access layer (HAL) for the Near Field Communication Tag (NFCT) peripheral.
Defines
-
NRF_NFCT_CRC_SIZE
¶ CRC size in bytes.
-
NRF_NFCT_DISABLE_ALL_INT
¶ Value to disable all interrupts.
-
NRF_NFCT_MOD_CTRL_PIN_NOT_CONNECTED
¶ This value can be used as a parameter for the nrf_nfct_mod_ctrl_pin_set function to specify that a given NFCT signal (MODULATION CONTROL) must not be connected to a physical pin.
Enums
-
enum
nrf_nfct_task_t
¶ NFCT tasks.
Values:
-
enumerator
NRF_NFCT_TASK_ACTIVATE
¶ Activate the NFCT peripheral for the incoming and outgoing frames, change state to activated.
-
enumerator
NRF_NFCT_TASK_DISABLE
¶ Disable the NFCT peripheral.
-
enumerator
NRF_NFCT_TASK_SENSE
¶ Enable the NFC sense field mode, change state to sense mode.
-
enumerator
NRF_NFCT_TASK_STARTTX
¶ Start the transmission of an outgoing frame, change state to transmit.
-
enumerator
NRF_NFCT_TASK_ENABLERXDATA
¶ Initialize EasyDMA for receive.
-
enumerator
NRF_NFCT_TASK_GOIDLE
¶ Force state machine to the IDLE state.
-
enumerator
NRF_NFCT_TASK_GOSLEEP
¶ Force state machine to the SLEEP_A state.
-
enumerator
-
enum
nrf_nfct_event_t
¶ NFCT events.
Values:
-
enumerator
NRF_NFCT_EVENT_READY
¶ The NFCT peripheral is ready to receive and send frames.
-
enumerator
NRF_NFCT_EVENT_FIELDDETECTED
¶ Remote NFC field is detected.
-
enumerator
NRF_NFCT_EVENT_FIELDLOST
¶ Remote NFC field is lost.
-
enumerator
NRF_NFCT_EVENT_TXFRAMESTART
¶ The start of the first symbol of a transmitted frame.
-
enumerator
NRF_NFCT_EVENT_TXFRAMEEND
¶ The end of the last transmitted on-air symbol of a frame.
-
enumerator
NRF_NFCT_EVENT_RXFRAMESTART
¶ The end of the first symbol of a received frame.
-
enumerator
NRF_NFCT_EVENT_RXFRAMEEND
¶ Received data was checked (CRC, parity) and transferred to RAM, and EasyDMA ended accessing the RX buffer.
-
enumerator
NRF_NFCT_EVENT_ERROR
¶ NFC error reported. The ERRORSTATUS register contains details on the source of the error.
-
enumerator
NRF_NFCT_EVENT_RXERROR
¶ NFC RX frame error reported. The FRAMESTATUS.RX register contains details on the source of the error.
-
enumerator
NRF_NFCT_EVENT_ENDRX
¶ RX buffer (as defined by PACKETPTR and MAXLEN) in Data RAM full.
-
enumerator
NRF_NFCT_EVENT_ENDTX
¶ Transmission of data in RAM ended, and EasyDMA ended accessing the TX buffer.
-
enumerator
NRF_NFCT_EVENT_AUTOCOLRESSTARTED
¶ Auto collision resolution process started.
-
enumerator
NRF_NFCT_EVENT_COLLISION
¶ NFC auto collision resolution error reported.
-
enumerator
NRF_NFCT_EVENT_SELECTED
¶ NFC auto collision resolution successfully completed.
-
enumerator
NRF_NFCT_EVENT_STARTED
¶ EasyDMA is ready to receive or send frames.
-
enumerator
-
enum
nrf_nfct_short_mask_t
¶ NFCT shortcuts.
Values:
-
enumerator
NRF_NFCT_SHORT_FIELDDETECTED_ACTIVATE_MASK
¶ Shortcut between the FIELDDETECTED event and the ACTIVATE task.
-
enumerator
NRF_NFCT_SHORT_FIELDLOST_SENSE_MASK
¶ Shortcut between the FIELDLOST event and the SENSE task.
-
enumerator
NRF_NFCT_SHORT_TXFRAMEEND_ENABLERXDATA_MASK
¶ Shortcut between the TXFRAMEEND event and the ENABLERXDATA task.
-
enumerator
-
enum
nrf_nfct_int_mask_t
¶ NFCT interrupts.
Values:
-
enumerator
NRF_NFCT_INT_READY_MASK
¶ Interrupt on READY event.
-
enumerator
NRF_NFCT_INT_FIELDDETECTED_MASK
¶ Interrupt on FIELDDETECTED event.
-
enumerator
NRF_NFCT_INT_FIELDLOST_MASK
¶ Interrupt on FIELDLOST event.
-
enumerator
NRF_NFCT_INT_TXFRAMESTART_MASK
¶ Interrupt on TXFRAMESTART event.
-
enumerator
NRF_NFCT_INT_TXFRAMEEND_MASK
¶ Interrupt on TXFRAMEEND event.
-
enumerator
NRF_NFCT_INT_RXFRAMESTART_MASK
¶ Interrupt on RXFRAMESTART event.
-
enumerator
NRF_NFCT_INT_RXFRAMEEND_MASK
¶ Interrupt on RXFRAMEEND event.
-
enumerator
NRF_NFCT_INT_ERROR_MASK
¶ Interrupt on ERROR event.
-
enumerator
NRF_NFCT_INT_RXERROR_MASK
¶ Interrupt on RXERROR event.
-
enumerator
NRF_NFCT_INT_ENDRX_MASK
¶ Interrupt on ENDRX event.
-
enumerator
NRF_NFCT_INT_ENDTX_MASK
¶ Interrupt on ENDTX event.
-
enumerator
NRF_NFCT_INT_AUTOCOLRESSTARTED_MASK
¶ Interrupt on AUTOCOLRESSTARTED event.
-
enumerator
NRF_NFCT_INT_COLLISION_MASK
¶ Interrupt on COLLISION event.
-
enumerator
NRF_NFCT_INT_SELECTED_MASK
¶ Interrupt on SELECTED event.
-
enumerator
NRF_NFCT_INT_STARTED_MASK
¶ Interrupt on STARTED event.
-
enumerator
-
enum
nrf_nfct_error_status_t
¶ NFC error status bit masks.
Values:
-
enumerator
NRF_NFCT_ERROR_FRAMEDELAYTIMEOUT_MASK
¶ Timeout of the Frame Delay Timer (no frame transmission started in the FDT window).
-
enumerator
NRF_NFCT_ERROR_NFCFIELDTOOSTRONG_MASK
¶ Field level is too high at maximum load resistance.
-
enumerator
NRF_NFCT_ERROR_NFCFIELDTOOWEAK_MASK
¶ Field level is too low at minimum load resistance.
-
enumerator
-
enum
nrf_nfct_rx_frame_status_t
¶ NFC received frame status bit masks.
Values:
-
enumerator
NRF_NFCT_RX_FRAME_STATUS_CRC_MASK
¶ CRC status mask.
-
enumerator
NRF_NFCT_RX_FRAME_STATUS_PARITY_MASK
¶ Parity status mask.
-
enumerator
NRF_NFCT_RX_FRAME_STATUS_OVERRUN_MASK
¶ Overrun status mask.
-
enumerator
-
enum
nrf_nfct_tag_state_t
¶ NFC tag state.
Values:
-
enumerator
NRF_NFCT_TAG_STATE_DISABLED
¶ Disabled or sensing NFC field.
-
enumerator
NRF_NFCT_TAG_STATE_RAMP_UP
¶ Ramping up.
-
enumerator
NRF_NFCT_TAG_STATE_IDLE
¶ Idle.
-
enumerator
NRF_NFCT_TAG_STATE_RECEIVE
¶ Receiving data.
-
enumerator
NRF_NFCT_TAG_STATE_FRAME_DELAY
¶ Counting Frame Delay Time since the last symbol of the last received frame.
-
enumerator
NRF_NFCT_TAG_STATE_TRANSMIT
¶ Transmitting data.
-
enumerator
-
enum
nrf_nfct_sleep_state_t
¶ NFC tag sleep state.
Shows the sleep state during automatic collision resolution according to the NFC Forum Activity Technical Specification v2.0.
Values:
-
enumerator
NRF_NFCT_SLEEP_STATE_IDLE
¶ ‘IDLE’ state.
-
enumerator
NRF_NFCT_SLEEP_STATE_SLEEP_A
¶ ‘SLEEP_A’ state.
-
enumerator
-
enum
nrf_nfct_field_state_t
¶ NFC field state bit masks.
Values:
-
enumerator
NRF_NFCT_FIELD_STATE_PRESENT_MASK
¶ Field presence mask.
-
enumerator
NRF_NFCT_FIELD_STATE_LOCK_MASK
¶ Field lock mask.
-
enumerator
-
enum
nrf_nfct_frame_delay_mode_t
¶ NFC frame delay mode for data transmission.
Values:
-
enumerator
NRF_NFCT_FRAME_DELAY_MODE_FREERUN
¶ Frame transmission starts when NRF_NFCT_TASK_STARTTX is set (delay timer is not used).
-
enumerator
NRF_NFCT_FRAME_DELAY_MODE_WINDOW
¶ Frame transmission starts in a window between FRAMEDELAYMIN and FRAMEDELAYMAX.
-
enumerator
NRF_NFCT_FRAME_DELAY_MODE_EXACTVAL
¶ Frame transmission starts when the delay timer reaches FRAMEDELAYMAX.
-
enumerator
NRF_NFCT_FRAME_DELAY_MODE_WINDOWGRID
¶ Frame transmission starts in a bit grid between FRAMEDELAYMIN and FRAMEDELAYMAX.
-
enumerator
-
enum
nrf_nfct_tx_frame_config_t
¶ Bit masks for NFC transmission frame configuration.
Values:
-
enumerator
NRF_NFCT_TX_FRAME_CONFIG_PARITY
¶ Indicates whether parity is added in the transmitted frames.
-
enumerator
NRF_NFCT_TX_FRAME_CONFIG_DISCARD_START
¶ Indicates whether unused bits are discarded at the start or at the end of the transmitted frames.
-
enumerator
NRF_NFCT_TX_FRAME_CONFIG_SOF
¶ Indicates whether SoF symbol is added in the transmitted frames.
-
enumerator
NRF_NFCT_TX_FRAME_CONFIG_CRC16
¶ Indicates whether CRC is added in the transmitted frames.
-
enumerator
-
enum
nrf_nfct_rx_frame_config_t
¶ Bit masks for NFC reception frame configuration.
Values:
-
enumerator
NRF_NFCT_RX_FRAME_CONFIG_PARITY
¶ Indicates whether parity is expected in the received frames.
-
enumerator
NRF_NFCT_RX_FRAME_CONFIG_SOF
¶ Indicates whether SoF symbol is expected in the received frames.
-
enumerator
NRF_NFCT_RX_FRAME_CONFIG_CRC16
¶ Indicates whether CRC is expected and checked in the received frames.
-
enumerator
-
enum
nrf_nfct_sensres_nfcid1_size_t
¶ ‘NFCI1 size’ NFC field configuration for the SENS_RES frame according to the NFC Forum Digital Protocol Technical Specification.
Values:
-
enumerator
NRF_NFCT_SENSRES_NFCID1_SIZE_SINGLE
¶ Single size NFCID1 (4 bytes).
-
enumerator
NRF_NFCT_SENSRES_NFCID1_SIZE_DOUBLE
¶ Double size NFCID1 (7 bytes).
-
enumerator
NRF_NFCT_SENSRES_NFCID1_SIZE_TRIPLE
¶ Triple size NFCID1 (10 bytes).
-
enumerator
NRF_NFCT_SENSRES_NFCID1_SIZE_DEFAULT
¶ Default size. Use this option to leave NFCID1 size unchanged.
-
enumerator
-
enum
nrf_nfct_sensres_bit_frame_sdd_t
¶ ‘Bit frame SDD’ NFC field configuration for the SENS_RES frame according to the NFC Forum Digital Protocol Technical Specification.
Values:
-
enumerator
NRF_NFCT_SENSRES_BIT_FRAME_SDD_00000
¶ SDD pattern 00000.
-
enumerator
NRF_NFCT_SENSRES_BIT_FRAME_SDD_00001
¶ SDD pattern 00001.
-
enumerator
NRF_NFCT_SENSRES_BIT_FRAME_SDD_00010
¶ SDD pattern 00010.
-
enumerator
NRF_NFCT_SENSRES_BIT_FRAME_SDD_00100
¶ SDD pattern 00100.
-
enumerator
NRF_NFCT_SENSRES_BIT_FRAME_SDD_01000
¶ SDD pattern 01000.
-
enumerator
NRF_NFCT_SENSRES_BIT_FRAME_SDD_10000
¶ SDD pattern 10000.
-
enumerator
-
enum
nrf_nfct_sensres_platform_config_t
¶ ‘Platofrm Config’ NFC field configuration for the SENS_RES frame according to the NFC Forum Digital Protocol Technical Specification.
Values:
-
enumerator
NRF_NFCT_SENSRES_PLATFORM_CONFIG_T1T
¶ SENS_RES ‘Platform Config’ field (b4-b1) value for Type 1 Tag platform. SENS_RES ‘Platform Config’ field (b7-b6) value for any platform except Type 1 Tag platform.
-
enumerator
NRF_NFCT_SENSRES_PLATFORM_CONFIG_OTHER
¶
-
enumerator
-
enum
nrf_nfct_selres_t
¶ Bit masks for SEL_RES NFC frame configuration.
Values:
-
enumerator
NRF_NFCT_SELRES_CASCADE_MASK
¶ SEL_RES Cascade field bit mask.
-
enumerator
NRF_NFCT_SELRES_PROTOCOL_MASK
¶ SEL_RES Protocol field bit mask.
-
enumerator
-
enum
nrf_nfct_selres_protocol_t
¶ Protocol NFC field (bits b7 and b6) configuration for the SEL_RES frame according to the NFC Forum Digital Protocol Technical Specification.
Values:
-
enumerator
NRF_NFCT_SELRES_PROTOCOL_T2T
¶ Type 2 Tag platform.
-
enumerator
NRF_NFCT_SELRES_PROTOCOL_T4AT
¶ Type 4A Tag platform.
-
enumerator
NRF_NFCT_SELRES_PROTOCOL_NFCDEP
¶ NFC-DEP Protocol.
-
enumerator
NRF_NFCT_SELRES_PROTOCOL_NFCDEP_T4AT
¶ NFC-DEP Protocol and Type 4A Tag platform).
-
enumerator
-
enum
nrf_nfct_modulation_ctrl_t
¶ Modulation output configuration.
Values:
-
enumerator
NRF_NFCT_MODULATION_CTRL_INVALID
¶ Invalid configuration. Defaults to the same behavior as NRF_NFCT_MODULATION_CTRL_INTERNAL.
-
enumerator
NRF_NFCT_MODULATION_CTRL_INTERNAL
¶ Use internal modulator only.
-
enumerator
NRF_NFCT_MODULATION_CTRL_GPIO
¶ Transmit output digital modulation signal to a GPIO pin.
-
enumerator
NRF_NFCT_MODULATION_CTRL_INTERNAL_GPIO
¶ Use internal modulator and transmit output digital modulation signal to a GPIO pin.
-
enumerator
Functions
-
NRF_STATIC_INLINE void
nrf_nfct_task_trigger
(NRF_NFCT_Type *p_reg, nrf_nfct_task_t task)¶ Function for activating a specific NFCT task.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
task – [in] Task to be activated.
-
NRF_STATIC_INLINE uint32_t
nrf_nfct_task_address_get
(NRF_NFCT_Type const *p_reg, nrf_nfct_task_t task)¶ Function for returning the address of a specific NFCT task register.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
task – [in] Task.
- Returns
Task address.
-
NRF_STATIC_INLINE void
nrf_nfct_event_clear
(NRF_NFCT_Type *p_reg, nrf_nfct_event_t event)¶ Function for clearing a specific event.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
event – [in] Event.
-
NRF_STATIC_INLINE bool
nrf_nfct_event_check
(NRF_NFCT_Type const *p_reg, nrf_nfct_event_t event)¶ Function for retrieving the state of the NFCT event.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
event – [in] Event to be checked.
- Returns true
The event has been generated.
- Returns false
The event has not been generated.
-
NRF_STATIC_INLINE uint32_t
nrf_nfct_event_address_get
(NRF_NFCT_Type const *p_reg, nrf_nfct_event_t event)¶ Function for returning the address of a specific NFCT event register.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
event – [in] Event.
- Returns
Address.
-
NRF_STATIC_INLINE void
nrf_nfct_shorts_enable
(NRF_NFCT_Type *p_reg, uint32_t short_mask)¶ Function for enabling selected shortcuts.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
short_mask – [in] Mask of shortcuts.
-
NRF_STATIC_INLINE void
nrf_nfct_shorts_disable
(NRF_NFCT_Type *p_reg, uint32_t short_mask)¶ Function for disabling selected shortcuts.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
short_mask – [in] Mask of shortcuts.
-
NRF_STATIC_INLINE uint32_t
nrf_nfct_shorts_get
(NRF_NFCT_Type const *p_reg)¶ Function for retrieving the enabled shortcuts.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
- Returns
Flags of the currently enabled shortcuts.
-
NRF_STATIC_INLINE void
nrf_nfct_shorts_set
(NRF_NFCT_Type *p_reg, uint32_t short_mask)¶ Function for setting shortcuts.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
short_mask – [in] Shortcut mask.
-
NRF_STATIC_INLINE void
nrf_nfct_int_enable
(NRF_NFCT_Type *p_reg, uint32_t mask)¶ Function for enabling the selected interrupts.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
mask – [in] Mask of interrupts to be enabled.
-
NRF_STATIC_INLINE uint32_t
nrf_nfct_int_enable_check
(NRF_NFCT_Type const *p_reg, uint32_t mask)¶ Function for checking if the specified interrupts are enabled.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
mask – [in] Mask of interrupts to be checked.
- Returns
Mask of enabled interrupts.
-
NRF_STATIC_INLINE uint32_t
nrf_nfct_int_enable_get
(NRF_NFCT_Type const *p_reg)¶ Function for retrieving the information about enabled interrupts.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
- Returns
The flags of the enabled interrupts.
-
NRF_STATIC_INLINE void
nrf_nfct_int_disable
(NRF_NFCT_Type *p_reg, uint32_t mask)¶ Function for disabling the selected interrupts.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
mask – [in] Mask of interrupts to be disabled.
-
NRF_STATIC_INLINE void
nrf_nfct_mod_ctrl_pin_set
(NRF_NFCT_Type *p_reg, uint32_t mod_ctrl_pin)¶ Function for configuring the NFCT modulation control pin.
If a given signal is not needed, pass the NRF_NFCT_MOD_CTRL_PIN_NOT_CONNECTED value instead of its pin number.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
mod_ctrl_pin – [in] Modulation control pin.
-
NRF_STATIC_INLINE uint32_t
nrf_nfct_mod_ctrl_pin_get
(NRF_NFCT_Type const *p_reg)¶ Function for getting the modulation control pin selection.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
- Returns
Modulation control pin selection.
-
NRF_STATIC_INLINE void
nrf_nfct_modulation_output_set
(NRF_NFCT_Type *p_reg, nrf_nfct_modulation_ctrl_t mod_ctrl)¶ Function for setting the modulation output. It enables the output to a GPIO pin which can be connected to a second external.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
mod_ctrl – [in] Modulation control field configuration.
-
NRF_STATIC_INLINE nrf_nfct_modulation_ctrl_t
nrf_nfct_modulation_output_get
(NRF_NFCT_Type const *p_reg)¶ Function for getting the modulation output configuration.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
- Returns
The configured modulation output.
-
NRF_STATIC_INLINE uint32_t
nrf_nfct_error_status_get
(NRF_NFCT_Type const *p_reg)¶ Function for getting the NFCT error status.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
- Returns
The NFCT error status flags, defined in nrf_nfct_error_status_t.
-
NRF_STATIC_INLINE void
nrf_nfct_error_status_clear
(NRF_NFCT_Type *p_reg, uint32_t error_flag)¶ Function for clearing the NFCT error status.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
error_flag – [in] Error flags to be cleared, defined in nrf_nfct_error_status_t.
-
NRF_STATIC_INLINE uint32_t
nrf_nfct_rx_frame_status_get
(NRF_NFCT_Type const *p_reg)¶ Function for getting the NFC frame reception status.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
- Returns
The flags of the NFC frame reception status, defined in nrf_nfct_rx_frame_status_t.
-
NRF_STATIC_INLINE void
nrf_nfct_rx_frame_status_clear
(NRF_NFCT_Type *p_reg, uint32_t framestatus_flags)¶ Function for clearing the NFC frame reception status.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
framestatus_flags – [in] Status flags to be cleared, defined in nrf_nfct_rx_frame_status_t.
-
NRF_STATIC_INLINE nrf_nfct_tag_state_t
nrf_nfct_tag_state_get
(NRF_NFCT_Type const *p_reg)¶ Function for getting the NFC tag state.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
- Returns NRF_NFCT_TAG_STATE_DISABLED
NFC tag is disabled.
- Returns NRF_NFCT_TAG_STATE_RAMP_UP
NFC tag is ramping up.
- Returns NRF_NFCT_TAG_STATE_IDLE
NFC tag is activated and idle.
- Returns NRF_NFCT_TAG_STATE_RECEIVE
NFC tag is receiving data.
- Returns NRF_NFCT_TAG_STATE_FRAME_DELAY
Frame Delay Timer of the NFC tag is counting ticks since the last symbol of the last received frame.
- Returns NRF_NFCT_TAG_STATE_TRANSMIT
NFC tag is transmitting data.
-
NRF_STATIC_INLINE nrf_nfct_sleep_state_t
nrf_nfct_sleep_state_get
(NRF_NFCT_Type const *p_reg)¶ Function for getting the NFC tag sleep state during the automatic collision resolution.
The returned value is the last state before the autimatic collision resolution started.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
- Returns NRF_NFCT_SLEEP_STATE_IDLE
NFC tag was in IDLE state before the automatic collision resolution started.
- Returns NRF_NFCT_SLEEP_STATE_SLEEP_A
NFC tag was in SLEEP_A state before the automatic collision resolution started.
-
NRF_STATIC_INLINE uint8_t
nrf_nfct_field_status_get
(NRF_NFCT_Type const *p_reg)¶ Function for getting the status of the external NFC field detection.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
- Returns
The NFC field detection status. Status bits can be checked by using nrf_nfct_field_state_t.
-
NRF_STATIC_INLINE uint16_t
nrf_nfct_frame_delay_min_get
(NRF_NFCT_Type const *p_reg)¶ Function for getting the minimum Frame Delay Time value.
This is the minimum value for Frame Delay Timer. It controls the shortest time between the last symbol of the last received frame and the start of the transmission of a new TX frame.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
- Returns
The minimum Frame Delay Time value in 13.56-MHz clock ticks.
-
NRF_STATIC_INLINE void
nrf_nfct_frame_delay_min_set
(NRF_NFCT_Type *p_reg, uint16_t frame_delay_min)¶ Function for setting the minimum Frame Delay Time value.
This is the minimum value for Frame Delay Timer. It controls the shortest time between the last symbol of the last received frame and the start of the transmission of a new TX frame.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
frame_delay_min – [in] Minimum Frame Delay Time value in 13.56-MHz clock ticks.
-
NRF_STATIC_INLINE uint32_t
nrf_nfct_frame_delay_max_get
(NRF_NFCT_Type const *p_reg)¶ Function for getting the maximum Frame Delay Time value.
This is the maximum value for Frame Delay Timer. It controls the longest time between the last symbol of the last received frame and the start of the transmission of a new TX frame. If no transmission starts before the Frame Delay Timer timeout, NRF_NFCT_ERROR_FRAMEDELAYTIMEOUT_MASK is set.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
- Returns
The maximum Frame Delay Time value in 13.56-MHz clock ticks.
-
NRF_STATIC_INLINE void
nrf_nfct_frame_delay_max_set
(NRF_NFCT_Type *p_reg, uint32_t frame_delay_max)¶ Function for setting the maximum Frame Delay Time value.
This is the maximum value for Frame Delay Timer. It controls the longest time between the last symbol of the last received frame and the start of the transmission of a new TX frame. If no transmission starts before the Frame Delay Timer timeout, NRF_NFCT_ERROR_FRAMEDELAYTIMEOUT_MASK is set.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
frame_delay_max – [in] Maximum Frame Delay Time value in 13.56-MHz clock ticks.
-
NRF_STATIC_INLINE nrf_nfct_frame_delay_mode_t
nrf_nfct_frame_delay_mode_get
(NRF_NFCT_Type const *p_reg)¶ Function for getting the Frame Delay Mode configuration.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
- Returns
The configured Frame Delay Mode.
-
NRF_STATIC_INLINE void
nrf_nfct_frame_delay_mode_set
(NRF_NFCT_Type *p_reg, nrf_nfct_frame_delay_mode_t frame_delay_mode)¶ Function for setting the NFC Frame Delay Mode configuration.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
frame_delay_mode – [in] Frame Delay Mode configuration.
-
NRF_STATIC_INLINE uint8_t *
nrf_nfct_rxtx_buffer_get
(NRF_NFCT_Type const *p_reg)¶ Function for getting the pointer to the NFCT RX/TX buffer.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
- Returns
The configured pointer to the receive or transmit buffer.
-
NRF_STATIC_INLINE void
nrf_nfct_rxtx_buffer_set
(NRF_NFCT_Type *p_reg, uint8_t *p_rxtx_buf, uint16_t max_txrx_len)¶ Function for setting the the NFCT RX/TX buffer (address and maximum length).
Note
Buffer for the NFC RX/TX data is used by EasyDMA and must be located in RAM.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
p_rxtx_buf – [in] Pointer to the receive or transmit buffer.
max_txrx_len – [in] Maximum receive or transmit length in bytes (size of the RAM buffer for EasyDMA).
-
NRF_STATIC_INLINE uint16_t
nrf_nfct_max_rxtx_length_get
(NRF_NFCT_Type const *p_reg)¶ Function for getting the NFCT RX/TX maximum buffer length.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
- Returns
The configured maximum receive or transmit length in bytes (size of the RX/TX buffer for EasyDMA).
-
NRF_STATIC_INLINE uint8_t
nrf_nfct_tx_frame_config_get
(NRF_NFCT_Type const *p_reg)¶ Function for getting the flags for NFC frame transmission configuration.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
- Returns
The flags of the NFCT frame transmission configuration, defined in nrf_nfct_tx_frame_config_t.
-
NRF_STATIC_INLINE void
nrf_nfct_tx_frame_config_set
(NRF_NFCT_Type *p_reg, uint8_t flags)¶ Function for setting up the flags of the NFC frame transmission configuration.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
flags – [in] Flags for NFCT TX configuration. Use nrf_nfct_tx_frame_config_t for setting.
-
NRF_STATIC_INLINE uint16_t
nrf_nfct_tx_bits_get
(NRF_NFCT_Type const *p_reg)¶ Function for getting the length of the configured transmission frame.
Note
NFC frames do not have to consist of full bytes only, therefore data amount for transmission is configured in number of bits.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
- Returns
Number of bits to be sent excluding CRC, parity, SoF, and EoF.
-
NRF_STATIC_INLINE void
nrf_nfct_tx_bits_set
(NRF_NFCT_Type *p_reg, uint16_t tx_bits)¶ Function for setting up the NFC frame transmission.
Set the number of TX bits excluding CRC, parity, SoF, and EoF.
Note
Source of data for transmission is set by using nrf_nfct_rxtx_buffer_set.
Note
NFC frames do not have to consist of full bytes only, therefore data amount for transmission is configured in number of bits.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
tx_bits – [in] Overall number of bits to be sent.
-
NRF_STATIC_INLINE uint8_t
nrf_nfct_rx_frame_config_get
(NRF_NFCT_Type const *p_reg)¶ Function for getting the flags of the NFC frame reception configuration.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
- Returns
The flags for NFCT frame reception configuration, defined in nrf_nfct_rx_frame_config_t.
-
NRF_STATIC_INLINE void
nrf_nfct_rx_frame_config_set
(NRF_NFCT_Type *p_reg, uint8_t flags)¶ Function for setting up the NFC frame reception.
Note
Destination for the received data is set using nrf_nfct_rxtx_buffer_set.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
flags – [in] NFCT RX configuration flags. Use nrf_nfct_rx_frame_config_t for setting the desired configuration.
-
NRF_STATIC_INLINE uint16_t
nrf_nfct_rx_bits_get
(NRF_NFCT_Type const *p_reg, bool crc_excluded)¶ Function for getting the number of bits received from the NFC poller.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
crc_excluded – [in] Flag for excluding CRC size from calculation.
- Returns
Number of received bits including or excluding CRC, and excluding parity and SoF/EoF framing.
-
NRF_STATIC_INLINE nrf_nfct_sensres_nfcid1_size_t
nrf_nfct_nfcid1_get
(NRF_NFCT_Type const *p_reg, uint8_t *p_nfcid1_buf)¶ Function for getting the NFCID1 (NFC tag identifier).
Note
This function always returns the full configuration of the NFCID1 setting (10 bytes), regardless of the NFCID1 size. The NFCID1 size can be configured using nrf_nfct_sensres_nfcid1_size_set or nrf_nfct_nfcid1_set.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
p_nfcid1_buf – [out] Pointer to a buffer for the NDFCID1 parameter. The NFCID1 values are in little endian order, that is: |NFCID1_3RD_LAST|NFCID1_2ND_LAST|NFCID1_LAST|.
- Returns
Configured NFCID1 length
-
NRF_STATIC_INLINE void
nrf_nfct_nfcid1_set
(NRF_NFCT_Type *p_reg, uint8_t const *p_nfcid1_buf, nrf_nfct_sensres_nfcid1_size_t nfcid1_size)¶ Function for setting the NFCID1 (NFC tag identifier).
Note
This function also configures the NFCIDSIZE field in the SENSRES register of the NFCT peripheral.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
p_nfcid1_buf – [in] Pointer to the buffer with NDFCID1 bytes.
nfcid1_size – [in] Size of the NFCID1 in bytes.
-
NRF_STATIC_INLINE bool
nrf_nfct_autocolres_is_enabled
(NRF_NFCT_Type const *p_reg)¶ Function for getting the setting for the automatic collision resolution.
The automatic collision resolution mechanism as defined in ISO 14443-3 and NFC Forum Digital Protocol Technical Specification 2.0, section 6.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
- Returns true
If automatic collision resolution is enabled.
- Returns false
If automatic collision resolution is disabled.
-
NRF_STATIC_INLINE void
nrf_nfct_autocolres_enable
(NRF_NFCT_Type *p_reg)¶ Function for enabling the automatic collision resolution.
The automatic collision resolution mechanism as defined in ISO 14443-3 and NFC Forum Digital Protocol Technical Specification 2.0, section 6.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
-
NRF_STATIC_INLINE void
nrf_nfct_autocolres_disable
(NRF_NFCT_Type *p_reg)¶ Function for disabling the automatic collision resolution.
The automatic collision resolution mechanism as defined in ISO 14443-3 and NFC Forum Digital Protocol Technical Specification 2.0, section 6.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
-
NRF_STATIC_INLINE nrf_nfct_sensres_nfcid1_size_t
nrf_nfct_sensres_nfcid1_size_get
(NRF_NFCT_Type const *p_reg)¶ Function for getting the NFCID1 size from the SENS_RES frame configuration.
The SENS_RES frame is handled automatically by the NFCT hardware.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
- Returns
NFCID1 (tag identifier) size.
-
NRF_STATIC_INLINE void
nrf_nfct_sensres_nfcid1_size_set
(NRF_NFCT_Type *p_reg, nrf_nfct_sensres_nfcid1_size_t nfcid1_size)¶ Function for setting the NFCID1 (tag identifier) size.field in the SENS_RES frame configuration.
Note
The SENS_RES frame is handled automatically by the NFCT hardware.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
nfcid1_size – [in] NFCID1 (tag identifier) size.
-
NRF_STATIC_INLINE nrf_nfct_sensres_bit_frame_sdd_t
nrf_nfct_sensres_bit_frame_sdd_get
(NRF_NFCT_Type const *p_reg)¶ Function for getting the Bit Frame SDD field from the SENS_RES frame configuration.
The SENS_RES frame is handled automatically by the NFCT hardware.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
- Returns
The Bit Frame SDD field configuration.
-
NRF_STATIC_INLINE void
nrf_nfct_sensres_bit_frame_sdd_set
(NRF_NFCT_Type *p_reg, nrf_nfct_sensres_bit_frame_sdd_t bit_frame_sdd)¶ Function for setting the Bit Frame SDD field in the SENS_RES frame configuration.
Note
The SENS_RES frame is handled automatically by the NFCT hardware.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
bit_frame_sdd – [in] The Bit Frame SDD field configuration.
-
NRF_STATIC_INLINE nrf_nfct_sensres_platform_config_t
nrf_nfct_sensres_platform_config_get
(NRF_NFCT_Type const *p_reg)¶ Function for getting the Platform Config field from the SENS_RES frame configuration.
The SENS_RES frame is handled automatically by the NFCT hardware.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
- Returns
The Platform Config field configuration.
-
NRF_STATIC_INLINE void
nrf_nfct_sensres_platform_config_set
(NRF_NFCT_Type *p_reg, nrf_nfct_sensres_platform_config_t platform_config)¶ Function for setting the Platform Config field in the SENS_RES frame configuration.
Note
The SENS_RES frame is handled automatically by the NFCT hardware.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
platform_config – [in] The Platform Config field configuration.
-
NRF_STATIC_INLINE bool
nrf_nfct_selres_cascade_check
(NRF_NFCT_Type const *p_reg)¶ Function for checking the CASCADE bit of the SEL_RES frame.
The CASCADE bit in the SEL_RES register is handled automatically by the NFCT hardware and indicates the status of the NFCID1 read operation to the NFC poller according to the NFC Forum Digital Protocol Speficiation 2.0, section 6.8.2.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
- Returns true
If NFCID1 read procedure is not complete.
- Returns false
If NFCID1 read procedure is complete.
-
NRF_STATIC_INLINE nrf_nfct_selres_protocol_t
nrf_nfct_selres_protocol_get
(NRF_NFCT_Type const *p_reg)¶ Function for getting the Protocol field in the SEL_RES frame.
The SEL_RES frame is handled automatically by the NFCT hardware.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
- Returns
Value of the Protocol field in the SEL_RES frame.
-
NRF_STATIC_INLINE void
nrf_nfct_selres_protocol_set
(NRF_NFCT_Type *p_reg, nrf_nfct_selres_protocol_t sel_res_protocol)¶ Function for setting the Protocol field in the SEL_RES frame configuration.
The SEL_RES frame is handled automatically by the NFCT hardware.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
sel_res_protocol – [in] Value of the Protocol field in the SEL_RES frame.
-