LPCOMP HAL¶
-
group
nrf_lpcomp_hal
Hardware access layer for managing the Low Power Comparator (LPCOMP) peripheral.
Enums
-
enum
nrf_lpcomp_ref_t
¶ LPCOMP reference selection.
Values:
-
enumerator
NRF_LPCOMP_REF_SUPPLY_1_8
¶ Use supply with a 1/8 prescaler as reference.
-
enumerator
NRF_LPCOMP_REF_SUPPLY_2_8
¶ Use supply with a 2/8 prescaler as reference.
-
enumerator
NRF_LPCOMP_REF_SUPPLY_3_8
¶ Use supply with a 3/8 prescaler as reference.
-
enumerator
NRF_LPCOMP_REF_SUPPLY_4_8
¶ Use supply with a 4/8 prescaler as reference.
-
enumerator
NRF_LPCOMP_REF_SUPPLY_5_8
¶ Use supply with a 5/8 prescaler as reference.
-
enumerator
NRF_LPCOMP_REF_SUPPLY_6_8
¶ Use supply with a 6/8 prescaler as reference.
-
enumerator
NRF_LPCOMP_REF_SUPPLY_7_8
¶ Use supply with a 7/8 prescaler as reference.
-
enumerator
NRF_LPCOMP_REF_EXT_REF0
¶ External reference 0.
-
enumerator
NRF_LPCOMP_REF_EXT_REF1
¶ External reference 1.
-
enumerator
-
enum
nrf_lpcomp_input_t
¶ LPCOMP input selection.
Values:
-
enumerator
NRF_LPCOMP_INPUT_0
¶ Input 0.
-
enumerator
NRF_LPCOMP_INPUT_1
¶ Input 1.
-
enumerator
NRF_LPCOMP_INPUT_2
¶ Input 2.
-
enumerator
NRF_LPCOMP_INPUT_3
¶ Input 3.
-
enumerator
NRF_LPCOMP_INPUT_4
¶ Input 4.
-
enumerator
NRF_LPCOMP_INPUT_5
¶ Input 5.
-
enumerator
NRF_LPCOMP_INPUT_6
¶ Input 6.
-
enumerator
NRF_LPCOMP_INPUT_7
¶ Input 7.
-
enumerator
-
enum
nrf_lpcomp_detect_t
¶ LPCOMP detection type selection.
Values:
-
enumerator
NRF_LPCOMP_DETECT_CROSS
¶ Generate ANADETEC on crossing, both upwards and downwards crossing.
-
enumerator
NRF_LPCOMP_DETECT_UP
¶ Generate ANADETEC on upwards crossing only.
-
enumerator
NRF_LPCOMP_DETECT_DOWN
¶ Generate ANADETEC on downwards crossing only.
-
enumerator
-
enum
nrf_lpcomp_task_t
¶ LPCOMP tasks.
Values:
-
enumerator
NRF_LPCOMP_TASK_START
¶ LPCOMP start sampling task.
-
enumerator
NRF_LPCOMP_TASK_STOP
¶ LPCOMP stop sampling task.
-
enumerator
NRF_LPCOMP_TASK_SAMPLE
¶ Sample comparator value.
-
enumerator
-
enum
nrf_lpcomp_event_t
¶ LPCOMP events.
Values:
-
enumerator
NRF_LPCOMP_EVENT_READY
¶ LPCOMP is ready and output is valid.
-
enumerator
NRF_LPCOMP_EVENT_DOWN
¶ Input voltage crossed the threshold going down.
-
enumerator
NRF_LPCOMP_EVENT_UP
¶ Input voltage crossed the threshold going up.
-
enumerator
NRF_LPCOMP_EVENT_CROSS
¶ Input voltage crossed the threshold in any direction.
-
enumerator
-
enum
nrf_lpcomp_int_mask_t
¶ LPCOMP interrupts.
Values:
-
enumerator
NRF_LPCOMP_INT_READY_MASK
¶ Interrupt on READY event.
-
enumerator
NRF_LPCOMP_INT_DOWN_MASK
¶ Interrupt on DOWN event.
-
enumerator
NRF_LPCOMP_INT_UP_MASK
¶ Interrupt on UP event.
-
enumerator
NRF_LPCOMP_INT_CROSS_MASK
¶ Interrupt on CROSS event.
-
enumerator
-
enum
nrf_lpcomp_short_mask_t
¶ LPCOMP shortcut masks.
Values:
-
enumerator
NRF_LPCOMP_SHORT_CROSS_STOP_MASK
¶ Shortcut between CROSS event and STOP task.
-
enumerator
NRF_LPCOMP_SHORT_UP_STOP_MASK
¶ Shortcut between UP event and STOP task.
-
enumerator
NRF_LPCOMP_SHORT_DOWN_STOP_MASK
¶ Shortcut between DOWN event and STOP task.
-
enumerator
NRF_LPCOMP_SHORT_READY_STOP_MASK
¶ Shortcut between READY event and STOP task.
-
enumerator
NRF_LPCOMP_SHORT_READY_SAMPLE_MASK
¶ Shortcut between READY event and SAMPLE task.
-
enumerator
Functions
-
NRF_STATIC_INLINE void
nrf_lpcomp_configure
(NRF_LPCOMP_Type *p_reg, nrf_lpcomp_config_t const *p_config)¶ Function for configuring LPCOMP.
This function powers on LPCOMP and configures it. LPCOMP is in DISABLE state after configuration, so it must be enabled before using it. All shorts are inactive, events are cleared, and LPCOMP is stopped.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
p_config – [in] Configuration.
-
NRF_STATIC_INLINE void
nrf_lpcomp_input_select
(NRF_LPCOMP_Type *p_reg, nrf_lpcomp_input_t input)¶ Function for selecting the LPCOMP input.
This function selects the active input of LPCOMP.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
input – [in] Input to be selected.
-
NRF_STATIC_INLINE void
nrf_lpcomp_enable
(NRF_LPCOMP_Type *p_reg)¶ Function for enabling the Low Power Comparator.
This function enables LPCOMP.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
-
NRF_STATIC_INLINE void
nrf_lpcomp_disable
(NRF_LPCOMP_Type *p_reg)¶ Function for disabling the Low Power Comparator.
This function disables LPCOMP.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
-
NRF_STATIC_INLINE uint32_t
nrf_lpcomp_result_get
(NRF_LPCOMP_Type const *p_reg)¶ Function for getting the last LPCOMP compare result.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
- Returns
The last compare result. If 0 then VIN+ < VIN-, if 1 then the opposite.
-
NRF_STATIC_INLINE void
nrf_lpcomp_int_enable
(NRF_LPCOMP_Type *p_reg, uint32_t mask)¶ Function for enabling interrupts from LPCOMP.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
mask – [in] Mask of interrupts to be enabled.
-
NRF_STATIC_INLINE void
nrf_lpcomp_int_disable
(NRF_LPCOMP_Type *p_reg, uint32_t mask)¶ Function for disabling interrupts from LPCOMP.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
mask – [in] Mask of interrupts to be disabled.
-
NRF_STATIC_INLINE uint32_t
nrf_lpcomp_int_enable_check
(NRF_LPCOMP_Type const *p_reg, uint32_t mask)¶ Function for checking if the specified interrupts are enabled.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
mask – [in] Mask of interrupts to be checked.
- Returns
Mask of enabled interrupts.
-
NRF_STATIC_INLINE uint32_t
nrf_lpcomp_task_address_get
(NRF_LPCOMP_Type const *p_reg, nrf_lpcomp_task_t task)¶ Function for getting the address of the specified LPCOMP task register.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
task – [in] LPCOMP task.
- Returns
The address of the specified LPCOMP task.
-
NRF_STATIC_INLINE uint32_t
nrf_lpcomp_event_address_get
(NRF_LPCOMP_Type const *p_reg, nrf_lpcomp_event_t event)¶ Function for getting the address of the specified LPCOMP event register.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
event – [in] LPCOMP event.
- Returns
The address of the specified LPCOMP event.
-
NRF_STATIC_INLINE void
nrf_lpcomp_shorts_enable
(NRF_LPCOMP_Type *p_reg, uint32_t mask)¶ Function for setting LPCOMP shorts.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
mask – [in] Mask of shortcuts.
-
NRF_STATIC_INLINE void
nrf_lpcomp_shorts_disable
(NRF_LPCOMP_Type *p_reg, uint32_t mask)¶ Function for clearing LPCOMP shorts by mask.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
mask – [in] Mask of shortcuts.
-
NRF_STATIC_INLINE void
nrf_lpcomp_task_trigger
(NRF_LPCOMP_Type *p_reg, nrf_lpcomp_task_t task)¶ Function for setting the specified LPCOMP task.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
task – [in] LPCOMP task to be set.
-
NRF_STATIC_INLINE void
nrf_lpcomp_event_clear
(NRF_LPCOMP_Type *p_reg, nrf_lpcomp_event_t event)¶ Function for clearing the specified LPCOMP event.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
event – [in] LPCOMP event to be cleared.
-
NRF_STATIC_INLINE bool
nrf_lpcomp_event_check
(NRF_LPCOMP_Type const *p_reg, nrf_lpcomp_event_t event)¶ Function for retrieving the state of the LPCOMP event.
- Parameters
p_reg – [in] Pointer to the structure of registers of the peripheral.
event – [in] Event to be checked.
- Returns true
The event has been generated.
- Returns false
The event has not been generated.
-
struct
nrf_lpcomp_config_t
¶ - #include <nrf_lpcomp.h>
LPCOMP configuration.
Public Members
-
nrf_lpcomp_ref_t
reference
¶ LPCOMP reference.
-
nrf_lpcomp_detect_t
detection
¶ LPCOMP detection type.
-
nrf_lpcomp_hysteresis_t
hyst
¶ LPCOMP hysteresis.
-
nrf_lpcomp_ref_t
-
enum