Light HSL Server

The Light HSL Server represents a single colored light. It should be instantiated in the light fixture node.

The Light HSL Server provides functionality for working on the individual hue, saturation and lightness channels in a combined message interface, controlled by a Light HSL Client.

The Light HSL Server adds the following new model instances in the composition data, in addition to the extended Light Lightness Server model:

  • Light HSL Server

  • Light HSL Setup Server

These model instances share the states of the Light HSL Server, but accept different messages. This allows for a fine-grained control of the access rights for the Light HSL states, as these model instances can be bound to different application keys:

  • The Light HSL Server only provides write access to the HSL state for the user, in addition to read access to all the meta states.

  • The Light HSL Setup Server provides write access to the corresponding Light Hue Server and Light Saturation Server models’ meta states. This allows the configurator devices to set up the range and the default value for the various HSL states.

Model composition

The Light HSL Server requires a Light Hue Server and a Light Saturation Server model to be instantiated in any of the following elements. As each of the Hue, Saturation and Lightness Server models extend the Generic Level Server model, they cannot be instantiated on the same element.

The recommended configuration for the Light HSL Server model is to instantiate the HSL Server (with its extended Lightness Server model) on one element, then instantiate the corresponding Light Hue Server model on the subsequent element, and the corresponding Light Saturation Server model on the next element after that:

Element N

Element N+1

Element N+2

Lightness Server

Light Hue Server

Light Saturation Server

Light HSL Server

In the application code, this would look like this:

static struct bt_mesh_light_hsl_srv hsl_srv =
     BT_MESH_LIGHT_HSL_SRV_INIT(&hue_cb, &sat_cb, &light_cb);

static struct bt_mesh_elem elements[] = {
     BT_MESH_ELEM(
             1, BT_MESH_MODEL_LIST(BT_MESH_MODEL_LIGHT_HSL_SRV(&hsl_srv)),
             BT_MESH_MODEL_NONE),
     BT_MESH_ELEM(
             2, BT_MESH_MODEL_LIST(BT_MESH_MODEL_LIGHT_HUE_SRV(&hsl_srv.hue)),
             BT_MESH_MODEL_NONE),
     BT_MESH_ELEM(
             3, BT_MESH_MODEL_LIST(BT_MESH_MODEL_LIGHT_SAT_SRV(&hsl_srv.sat)),
             BT_MESH_MODEL_NONE),
};

Note

The bt_mesh_light_hsl_srv contains the memory for its corresponding Light Hue Server and Light Saturation Server. When instantiating these models in the composition data, the model entries must point to these substructures.

The Light HSL Server does not contain any states on its own, but instead operates on the underlying Hue, Saturation and Lightness Server model’s states. Because of this, the Light HSL Server does not have a message handler structure, but will instead defer its messages to the individual submodels’ handler callbacks.

States

None.

Extended models

The Light HSL Server extends the following models:

Additionally, the Light HSL Server model requires a Light Hue Server and a Light Saturation Server to be instantiated on any of the following elements, using the bt_mesh_light_hsl_srv.hue and bt_mesh_light_hsl_srv.sat structures.

Persistent storage

The Light HSL Server does not store any data persistently, but will control the underlying Light Hue Server and Light Saturation Server models’ state when the device is powered up.

API documentation

Header file: include/bluetooth/mesh/light_hsl_srv.h
Source file: subsys/bluetooth/mesh/light_hsl_srv.c
group bt_mesh_light_hsl_srv

API for the Light HSL Server model.

Defines

BT_MESH_LIGHT_HSL_SRV_INIT(_hue_handlers, _sat_handlers, _light_handlers)

Initialization parameters for a Light HSL Server model instance.

Parameters
  • _hue_handlers[in] Hue Server model handlers.

  • _sat_handlers[in] Saturation Server model handlers.

  • _light_handlers[in] Lightness Server model handlers.

BT_MESH_MODEL_LIGHT_HSL_SRV(_srv)

Light HSL Server model composition data entry.

Parameters

Functions

int bt_mesh_light_hsl_srv_pub(struct bt_mesh_light_hsl_srv *srv, struct bt_mesh_msg_ctx *ctx, const struct bt_mesh_light_hsl_status *status)

Publish the current HSL status.

Asynchronously publishes a HSL status message with the configured publish parameters.

Note

This API is only used publishing unprompted status messages. Response messages for get and set messages are handled internally.

Parameters
  • srv[in] Server instance to publish on.

  • ctx[in] Message context to send with, or NULL to send with the configured publish parameters.

  • status[in] Status parameters.

Returns 0

Successfully sent the message.

Returns -EADDRNOTAVAIL

A message context was not provided and publishing is not configured.

Returns -EAGAIN

The device has not been provisioned.

struct bt_mesh_light_hsl_srv
#include <light_hsl_srv.h>

Light HSL Server instance.

Public Members

struct bt_mesh_light_hue_srv hue

Light Hue Server instance.

struct bt_mesh_light_sat_srv sat

Light Saturation Server instance.

struct bt_mesh_lightness_srv lightness

Lightness Server instance.

struct bt_mesh_model *model

Model entry.

struct bt_mesh_model_pub pub

Publish parameters.

struct net_buf_simple buf

Publish message buffer

uint8_t pub_data[BT_MESH_MODEL_BUF_LEN(BT_MESH_LIGHT_HSL_OP_STATUS, BT_MESH_LIGHT_HSL_MSG_MAXLEN_STATUS)]

Publish message buffer data

bool pub_pending

A publication is pending, and any calls to bt_mesh_light_hsl_srv_pub will return successfully without sending a message.

struct bt_mesh_tid_ctx prev_transaction

Transaction ID tracker for the set messages.