Help¶

Bitwise "OR" mask of channels used by Zigbee.
The default setting enables all channels.

Available channels:
 - bits 31..27: UNUSED, should be cleared
 - bits 26..11: bit n enables its corresponding channel
 - bits 10..0: UNUSED, should be cleared

Direct dependencies¶

ZIGBEE_CHANNEL_SELECTION_MODE_MULTI && ZIGBEE

(Includes any dependencies from ifs and menus.)

Default¶

0x7FFF800

Kconfig definition¶

At <nRF>/subsys/zigbee/Kconfig:54

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:23 → <Zephyr>/modules/Kconfig:6 → <BuildDir>/kconfig/Kconfig.modules:2 → <nRF>/Kconfig.nrf:50 → <nRF>/subsys/Kconfig:40

Menu path: (Top) → Modules → nrf (/home/runner/work/sdk-nrf/sdk-nrf/ncs/nrf) → Nordic nRF Connect → Enable Zigbee stack

config ZIGBEE_CHANNEL_MASK
    hex "Mask of 802.15.4 channels used by Zigbee"
    range 0x800 0x7FFF800
    default 0x7FFF800
    depends on ZIGBEE_CHANNEL_SELECTION_MODE_MULTI && ZIGBEE
    help
      Bitwise "OR" mask of channels used by Zigbee.
      The default setting enables all channels.

      Available channels:
       - bits 31..27: UNUSED, should be cleared
       - bits 26..11: bit n enables its corresponding channel
       - bits 10..0: UNUSED, should be cleared

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)