-
CONFIG_TFM_FLASH_MERGED_BINARY
¶
(No prompt – not directly user assignable.)
Type: bool
Help¶
This option instructs west flash to program the
combined (merged) binary consisting of the TF-M
Secure firmware image, optionally, the BL2 image
(if building with TFM_BL2 is enabled), and the
Non-Secure application firmware.
Help¶
This option instructs west flash to program the
combined (merged) binary consisting of the TF-M
Secure firmware image, optionally, the BL2 image
(if building with TFM_BL2 is enabled), and the
Non-Secure application firmware.
Help¶
This option instructs west flash to program the
combined (merged) binary consisting of the TF-M
Secure firmware image, optionally, the BL2 image
(if building with TFM_BL2 is enabled), and the
Non-Secure application firmware.
Direct dependencies¶
(BUILD_WITH_TFM
&& (BOARD_BL5340_DVK_CPUAPP
|| BOARD_BL5340_DVK_CPUAPPNS
)) || (BUILD_WITH_TFM
&& (BOARD_NRF5340DK_NRF5340_CPUAPP
|| BOARD_NRF5340DK_NRF5340_CPUAPPNS
)) || (BUILD_WITH_TFM
&& (BOARD_NRF9160DK_NRF9160
|| BOARD_NRF9160DK_NRF9160NS
)) || (BUILD_WITH_TFM
&& !TFM_MINIMAL
) || (BUILD_WITH_TFM
&& TFM_MINIMAL
) || (BUILD_WITH_TFM
&& 0)
(Includes any dependencies from ifs and menus.)
Defaults¶
y if
TEST_ARM_CORTEX_M
y if
TEST_ARM_CORTEX_M
y if
TEST_ARM_CORTEX_M
Kconfig definitions¶
At <Zephyr>/boards/arm/bl5340_dvk/Kconfig.defconfig:36
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:18
Menu path: (Top)
config TFM_FLASH_MERGED_BINARY
bool
default y if TEST_ARM_CORTEX_M
depends on BUILD_WITH_TFM && (BOARD_BL5340_DVK_CPUAPP || BOARD_BL5340_DVK_CPUAPPNS)
At <Zephyr>/boards/arm/nrf5340dk_nrf5340/Kconfig.defconfig:25
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:18
Menu path: (Top)
config TFM_FLASH_MERGED_BINARY
bool
default y if TEST_ARM_CORTEX_M
depends on BUILD_WITH_TFM && (BOARD_NRF5340DK_NRF5340_CPUAPP || BOARD_NRF5340DK_NRF5340_CPUAPPNS)
At <Zephyr>/boards/arm/nrf9160dk_nrf9160/Kconfig.defconfig:16
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:18
Menu path: (Top)
config TFM_FLASH_MERGED_BINARY
bool
default y if TEST_ARM_CORTEX_M
depends on BUILD_WITH_TFM && (BOARD_NRF9160DK_NRF9160 || BOARD_NRF9160DK_NRF9160NS)
At <Zephyr>/modules/trusted-firmware-m/Kconfig.tfm:236
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:23
→ <Zephyr>/modules/Kconfig:6
→ <BuildDir>/kconfig/Kconfig.modules:14
→ <nRF>/modules/trusted-firmware-m/Kconfig:34
→ <Zephyr>/modules/trusted-firmware-m/Kconfig:7
Menu path: (Top) → Modules → trusted-firmware-m (/home/runner/work/sdk-nrf/sdk-nrf/ncs/modules/tee/tfm) → Build with TF-M as the Secure Execution Environment
config TFM_FLASH_MERGED_BINARY
bool
depends on BUILD_WITH_TFM && !TFM_MINIMAL
help
This option instructs west flash to program the
combined (merged) binary consisting of the TF-M
Secure firmware image, optionally, the BL2 image
(if building with TFM_BL2 is enabled), and the
Non-Secure application firmware.
At <Zephyr>/modules/trusted-firmware-m/Kconfig.tfm:236
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:23
→ <Zephyr>/modules/Kconfig:6
→ <BuildDir>/kconfig/Kconfig.modules:14
→ <nRF>/modules/trusted-firmware-m/Kconfig:43
Menu path: (Top) → Modules → trusted-firmware-m (/home/runner/work/sdk-nrf/sdk-nrf/ncs/modules/tee/tfm) → Build with TF-M as the Secure Execution Environment
config TFM_FLASH_MERGED_BINARY
bool
depends on BUILD_WITH_TFM && TFM_MINIMAL
help
This option instructs west flash to program the
combined (merged) binary consisting of the TF-M
Secure firmware image, optionally, the BL2 image
(if building with TFM_BL2 is enabled), and the
Non-Secure application firmware.
At <Zephyr>/modules/trusted-firmware-m/Kconfig.tfm:236
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:23
→ <Zephyr>/modules/Kconfig:66
→ <Zephyr>/modules/trusted-firmware-m/Kconfig:7
Menu path: (Top) → Modules → Build with TF-M as the Secure Execution Environment
config TFM_FLASH_MERGED_BINARY
bool
depends on BUILD_WITH_TFM && 0
help
This option instructs west flash to program the
combined (merged) binary consisting of the TF-M
Secure firmware image, optionally, the BL2 image
(if building with TFM_BL2 is enabled), and the
Non-Secure application firmware.
(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)