-
CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED
¶
Enable SECP256R1 elliptic curve
Enable NIST curve secp256r1
Enable SECP256R1 elliptic curve
Type: bool
Help¶
MBEDTLS_ECP_DP_SECP256R1_ENABLED setting in mbed TLS config file.
Direct dependencies¶
((MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED
|| MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
|| MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
|| MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
|| MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
|| MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
) && MBEDTLS_BUILTIN
&& MBEDTLS_CFG_FILE
= “config-tls-generic.h” && MBEDTLS
) || (MBEDTLS_ECP_C
&& NRF_SECURITY_ANY_BACKEND
&& NORDIC_SECURITY_BACKEND
) || ((MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED
|| MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
|| MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
|| MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
|| MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
|| MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
) && MBEDTLS_BUILTIN
&& MBEDTLS_CFG_FILE
= “config-tls-generic.h” && MBEDTLS
&& 0)
(Includes any dependencies from ifs and menus.)
Default¶
y
Symbols that select this symbol¶
Kconfig definitions¶
At <Zephyr>/modules/mbedtls/Kconfig.tls-generic:134
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:23
→ <Zephyr>/modules/Kconfig:6
→ <BuildDir>/kconfig/Kconfig.modules:50
→ <Zephyr>/modules/mbedtls/Kconfig:62
Menu path: (Top) → Modules → mbedtls (/home/runner/work/sdk-nrf/sdk-nrf/ncs/modules/crypto/mbedtls) → mbed TLS Support → TLS configuration → Ciphersuite configuration
config MBEDTLS_ECP_DP_SECP256R1_ENABLED
bool "Enable SECP256R1 elliptic curve"
depends on (MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED || MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED || MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED || MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED || MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED || MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED) && MBEDTLS_BUILTIN && MBEDTLS_CFG_FILE = "config-tls-generic.h" && MBEDTLS
At <nrfxlib>/nrf_security/Kconfig:1183
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:23
→ <Zephyr>/modules/Kconfig:6
→ <BuildDir>/kconfig/Kconfig.modules:62
→ <nrfxlib>/Kconfig.nrfxlib:13
Menu path: (Top) → Modules → nrfxlib (/home/runner/work/sdk-nrf/sdk-nrf/ncs/nrfxlib) → Nordic nrfxlib → Nordic Security → Use Nordic provided security backend → ECC - Eliptic Curve Cryptography → ECC curves
config MBEDTLS_ECP_DP_SECP256R1_ENABLED
bool "Enable NIST curve secp256r1"
default y
depends on MBEDTLS_ECP_C && NRF_SECURITY_ANY_BACKEND && NORDIC_SECURITY_BACKEND
help
MBEDTLS_ECP_DP_SECP256R1_ENABLED setting in mbed TLS config file.
At <Zephyr>/modules/mbedtls/Kconfig.tls-generic:134
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:23
→ <Zephyr>/modules/Kconfig:66
→ <Zephyr>/modules/mbedtls/Kconfig:62
Menu path: (Top) → Modules → mbed TLS Support → TLS configuration → Ciphersuite configuration
config MBEDTLS_ECP_DP_SECP256R1_ENABLED
bool "Enable SECP256R1 elliptic curve"
depends on (MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED || MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED || MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED || MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED || MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED || MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED) && MBEDTLS_BUILTIN && MBEDTLS_CFG_FILE = "config-tls-generic.h" && MBEDTLS && 0
(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)