-
CONFIG_LIS2DW12_PULSE_LTNCY
¶
Latency value
Type: hex
Help¶
When double-tap recognition is enabled, this register expresses
the maximum time between two successive detected taps to
determine a double-tap event. Where 0 equals 16*1/ODR and
1LSB = 32*1/ODR.
Direct dependencies¶
LIS2DW12_PULSE
&& LIS2DW12_TRIGGER
&& LIS2DW12
&& SENSOR
(Includes any dependencies from ifs and menus.)
Default¶
0x05
Kconfig definition¶
At <Zephyr>/drivers/sensor/lis2dw12/Kconfig:136
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:32
→ <Zephyr>/drivers/Kconfig:62
→ <Zephyr>/drivers/sensor/Kconfig:121
Menu path: (Top) → Device Drivers → Sensor Drivers → LIS2DW12 I2C/SPI accelerometer sensor driver → Pulse detection
config LIS2DW12_PULSE_LTNCY
hex "Latency value"
range 0 0x0F
default 0x05
depends on LIS2DW12_PULSE && LIS2DW12_TRIGGER && LIS2DW12 && SENSOR
help
When double-tap recognition is enabled, this register expresses
the maximum time between two successive detected taps to
determine a double-tap event. Where 0 equals 16*1/ODR and
1LSB = 32*1/ODR.
(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)