-
CONFIG_CAN_MCUX_FLEXCAN
¶
MCUX FlexCAN driver
Type: bool
Help¶
Enable support for mcux flexcan driver.
Direct dependencies¶
(CAN
&& SOC_SERIES_IMX_RT
) || (CAN
&& SOC_MK64F12
&& SOC_SERIES_KINETIS_K6X
) || (CAN
&& SOC_MKE16F16
&& SOC_SERIES_KINETIS_KE1XF
) || (CAN
&& SOC_MKE18F16
&& SOC_SERIES_KINETIS_KE1XF
) || (HAS_MCUX_FLEXCAN
&& CLOCK_CONTROL
&& CAN
)
(Includes any dependencies from ifs and menus.)
Defaults¶
y if
HAS_MCUX_FLEXCAN
y
y
y
Kconfig definitions¶
At <Zephyr>/soc/arm/nxp_imx/rt/Kconfig.defconfig.series:15
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:19
→ <BuildDir>/kconfig/Kconfig.soc.defconfig:1
→ <Zephyr>/soc/arm/nxp_imx/Kconfig.defconfig:4
Menu path: (Top)
config CAN_MCUX_FLEXCAN
bool
default y if HAS_MCUX_FLEXCAN
depends on CAN && SOC_SERIES_IMX_RT
At <Zephyr>/soc/arm/nxp_kinetis/k6x/Kconfig.defconfig.mk64f12:19
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:19
→ <BuildDir>/kconfig/Kconfig.soc.defconfig:1
→ <Zephyr>/soc/arm/nxp_kinetis/Kconfig.defconfig:3
→ <Zephyr>/soc/arm/nxp_kinetis/k6x/Kconfig.defconfig.series:26
Menu path: (Top)
config CAN_MCUX_FLEXCAN
bool
default y
depends on CAN && SOC_MK64F12 && SOC_SERIES_KINETIS_K6X
At <Zephyr>/soc/arm/nxp_kinetis/ke1xf/Kconfig.defconfig.mke16f16:11
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:19
→ <BuildDir>/kconfig/Kconfig.soc.defconfig:1
→ <Zephyr>/soc/arm/nxp_kinetis/Kconfig.defconfig:3
→ <Zephyr>/soc/arm/nxp_kinetis/ke1xf/Kconfig.defconfig.series:96
Menu path: (Top)
config CAN_MCUX_FLEXCAN
bool
default y
depends on CAN && SOC_MKE16F16 && SOC_SERIES_KINETIS_KE1XF
At <Zephyr>/soc/arm/nxp_kinetis/ke1xf/Kconfig.defconfig.mke18f16:11
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:19
→ <BuildDir>/kconfig/Kconfig.soc.defconfig:1
→ <Zephyr>/soc/arm/nxp_kinetis/Kconfig.defconfig:3
→ <Zephyr>/soc/arm/nxp_kinetis/ke1xf/Kconfig.defconfig.series:96
Menu path: (Top)
config CAN_MCUX_FLEXCAN
bool
default y
depends on CAN && SOC_MKE18F16 && SOC_SERIES_KINETIS_KE1XF
At <Zephyr>/drivers/can/Kconfig.mcux:6
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:32
→ <Zephyr>/drivers/Kconfig:80
→ <Zephyr>/drivers/can/Kconfig:86
Menu path: (Top) → Device Drivers → CAN Drivers
config CAN_MCUX_FLEXCAN
bool "MCUX FlexCAN driver"
depends on HAS_MCUX_FLEXCAN && CLOCK_CONTROL && CAN
help
Enable support for mcux flexcan driver.
(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)