-
CONFIG_2ND_LVL_INTR_00_OFFSET
¶
Level 1 IRQ line for 2ND level aggregator 0
Type: int
Help¶
This is the level $(prev-level-num) interrupt number for level
$(cur-level-num) interrupt aggregator $(aggregator).
Direct dependencies¶
BOARD_INTEL_ADSP_CAVS15
|| BOARD_INTEL_ADSP_CAVS18
|| BOARD_INTEL_ADSP_CAVS20
|| BOARD_INTEL_ADSP_CAVS25
|| BOARD_INTEL_S1000_CRB
|| (MULTI_LEVEL_INTERRUPTS
&& SOC_OPENISA_RV32M1_RISCV32
) || SOC_SERIES_RISCV32_MIV
|| SOC_SERIES_RISCV_SIFIVE_FREEDOM
|| SOC_SERIES_RISCV_VIRT
|| 2ND_LEVEL_INTERRUPTS
(Includes any dependencies from ifs and menus.)
Defaults¶
Kconfig definitions¶
At <Zephyr>/boards/xtensa/intel_adsp_cavs15/Kconfig.defconfig:19
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:18
Menu path: (Top)
config 2ND_LVL_INTR_00_OFFSET
int
default CAVS_ICTL_0_OFFSET
depends on BOARD_INTEL_ADSP_CAVS15
At <Zephyr>/boards/xtensa/intel_adsp_cavs18/Kconfig.defconfig:19
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:18
Menu path: (Top)
config 2ND_LVL_INTR_00_OFFSET
int
default CAVS_ICTL_0_OFFSET
depends on BOARD_INTEL_ADSP_CAVS18
At <Zephyr>/boards/xtensa/intel_adsp_cavs20/Kconfig.defconfig:19
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:18
Menu path: (Top)
config 2ND_LVL_INTR_00_OFFSET
int
default CAVS_ICTL_0_OFFSET
depends on BOARD_INTEL_ADSP_CAVS20
At <Zephyr>/boards/xtensa/intel_adsp_cavs25/Kconfig.defconfig:19
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:18
Menu path: (Top)
config 2ND_LVL_INTR_00_OFFSET
int
default CAVS_ICTL_0_OFFSET
depends on BOARD_INTEL_ADSP_CAVS25
At <Zephyr>/boards/xtensa/intel_s1000_crb/Kconfig.defconfig:21
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:18
Menu path: (Top)
config 2ND_LVL_INTR_00_OFFSET
int
default CAVS_ICTL_0_OFFSET
depends on BOARD_INTEL_S1000_CRB
At <Zephyr>/soc/riscv/openisa_rv32m1/Kconfig.defconfig:65
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:19
→ <BuildDir>/kconfig/Kconfig.soc.defconfig:1
Menu path: (Top)
config 2ND_LVL_INTR_00_OFFSET
int
default 24
depends on MULTI_LEVEL_INTERRUPTS && SOC_OPENISA_RV32M1_RISCV32
At <Zephyr>/soc/riscv/riscv-privilege/miv/Kconfig.defconfig.series:23
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:19
→ <BuildDir>/kconfig/Kconfig.soc.defconfig:1
→ <Zephyr>/soc/riscv/riscv-privilege/Kconfig.defconfig:6
Menu path: (Top)
config 2ND_LVL_INTR_00_OFFSET
int
default 11
depends on SOC_SERIES_RISCV32_MIV
At <Zephyr>/soc/riscv/riscv-privilege/sifive-freedom/Kconfig.defconfig.series:23
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:19
→ <BuildDir>/kconfig/Kconfig.soc.defconfig:1
→ <Zephyr>/soc/riscv/riscv-privilege/Kconfig.defconfig:6
Menu path: (Top)
config 2ND_LVL_INTR_00_OFFSET
int
default 11
depends on SOC_SERIES_RISCV_SIFIVE_FREEDOM
At <Zephyr>/soc/riscv/riscv-privilege/virt/Kconfig.defconfig.series:24
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:19
→ <BuildDir>/kconfig/Kconfig.soc.defconfig:1
→ <Zephyr>/soc/riscv/riscv-privilege/Kconfig.defconfig:6
Menu path: (Top)
config 2ND_LVL_INTR_00_OFFSET
int
default 11
depends on SOC_SERIES_RISCV_VIRT
At <Zephyr>/drivers/interrupt_controller/Kconfig.multilevel.aggregator_template:3
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:32
→ <Zephyr>/drivers/Kconfig:26
→ <Zephyr>/drivers/interrupt_controller/Kconfig:49
→ <Zephyr>/drivers/interrupt_controller/Kconfig.multilevel:59
Menu path: (Top) → Device Drivers → Interrupt Controllers → Multi-level interrupt support → Second-level interrupt support
config 2ND_LVL_INTR_00_OFFSET
int "Level 1 IRQ line for 2ND level aggregator 0"
default 0
depends on 2ND_LEVEL_INTERRUPTS
help
This is the level $(prev-level-num) interrupt number for level
$(cur-level-num) interrupt aggregator $(aggregator).
(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)