USB HID Sample Application
This sample app demonstrates use of a USB Human Interface Device (HID) driver by the Zephyr project. This very simple driver is enumerated as a raw HID device. This sample can be found under samples/subsys/usb/hid in the Zephyr project tree.
This project requires a USB device driver.
Building and Running
This sample can be built for multiple boards, in this example we will build it for the reel_board board:
west build -b reel_board samples/subsys/usb/hid
After you have built and flashed the sample app image to your board, plug the board into a host device, for example, a PC running Linux. The board will be detected as shown by the Linux journalctl command:
$ journalctl -k -n 10 usb 7-1: New USB device found, idVendor=2fe3, idProduct=0006, bcdDevice= 2.03 usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 7-1: Product: Zephyr HID sample usb 7-1: Manufacturer: ZEPHYR usb 7-1: SerialNumber: 86FE679A598AC47A input: ZEPHYR Zephyr HID sample as /devices/platform/vhci_hcd.0/usb7/7-1/7-1:1.0/0003:2FE3:0100.0046/input/input81 hid-generic 0003:2FE3:0100.0046: input,hidraw0: USB HID v1.10 Device [ZEPHYR Zephyr HID sample] on usb-vhci_hcd.0-1/input0
You can monitor report sending using standard Linux
$ sudo usbhid-dump -d 2fe3:0006 -es Starting dumping interrupt transfer stream with 1 minute timeout. 007:012:000:STREAM 1537362690.341208 01 02