IPC service: static vrings backend

Overview

This application demonstrates how to use IPC Service and the static vrings backend with Zephyr. It is designed to demonstrate how to integrate it with Zephyr both from a build perspective and code.

Building the application for nrf5340dk_nrf5340_cpuapp

# From the root of the zephyr repository
west build -b nrf5340dk_nrf5340_cpuapp --sysbuild samples/subsys/ipc/ipc_service/static_vrings
west debug

Open a serial terminal (minicom, putty, etc.) and connect the board with the following settings:

  • Speed: 115200

  • Data: 8 bits

  • Parity: None

  • Stop bits: 1

Reset the board and the following message will appear on the corresponding serial port, one is host another is remote:

*** Booting Zephyr OS build zephyr-v3.1.0-2383-g147aee22f273  ***
IPC-service HOST [INST 0 - ENDP A] demo started
IPC-service HOST [INST 0 - ENDP B] demo started
IPC-service HOST [INST 1] demo started
HOST [1]: 1
HOST [1]: 3
HOST [1]: 5
HOST [1]: 7
HOST [1]: 9
...
*** Booting Zephyr OS build zephyr-v3.1.0-2383-g147aee22f273  ***
IPC-service REMOTE [INST 0 - ENDP A] demo started
IPC-service REMOTE [INST 0 - ENDP B] demo started
IPC-service REMOTE [INST 1] demo started
REMOTE [1]: 0
REMOTE [1]: 2
REMOTE [1]: 4
REMOTE [1]: 6
REMOTE [1]: 8
...