LPS22HH: Temperature and Pressure Monitor
This sample periodically reads pressure from the LPS22HH MEMS pressure sensor and displays it on the console.
This sample uses the LPS22HH sensor controlled using the I2C interface.
Building and Running
This project outputs sensor data to the console. It requires an LPS22HH sensor, which is present on the X-NUCLEO-IKS01A3 shield.
west build -b nrf52dk_nrf52832 samples/sensor/lps22hh -- -DSHIELD=x_nucleo_iks01a3
Configured for triggered collection at 1 Hz Observation: 1 Pressure: 97.474 kPa Temperature: 22.19 C Observation: 2 Pressure: 97.466 kPa Temperature: 22.21 C Observation: 3 Pressure: 97.473 kPa Temperature: 22.21 C Observation: 4 Pressure: 97.455 kPa Temperature: 22.21 C <repeats endlessly every second>