nxp,mipi-dsi-2l

Vendor: NXP Semiconductors

Description

These nodes are “mipi-dsi” bus nodes.

NXP MCUX MIPI DSI 2L

Properties

Properties not inherited from the base binding file.

Name

Type

Details

nxp,lcdif

phandle

 
Instance of the LCDIF peripheral. Only required when using the MIPI in video mode

dpi-color-coding

string

 
MIPI DPI interface color coding. Sets the distribution of RGB bits within the 24-bit d bus, as specified by the DPI specification.

Legal values: '16-bit-config-1', '16-bit-config-2', '16-bit-config-3', '18-bit-config-1', '18-bit-config-2', '24-bit'

dpi-pixel-packet

string

 
MIPI DSI pixel packet type send through DPI interface.

Legal values: '16-bit', '18-bit', '18-bit-loose', '24-bit'

dpi-video-mode

string

 
DPI video mode.

Legal values: 'non-burst-sync-pulse', 'non-burst-sync-event', 'burst'

dpi-bllp-mode

string

 
Behavior in BLLP (Blanking or Low-Power Interval).

Legal values: 'low-power', 'blank', 'null'

autoinsert-eotp

boolean

 
Automatically insert an EoTp short packet when switching from HS to LP mode.

dphy-ref-frequency

int

 
Maximum clock speed supported by the device, in Hz. Leave at default if no DPHY PLL is present

noncontinuous-hs-clk

boolean

 
Enable non-contiuous high speed clock. Saves power but introduces latency when transitioning to high speed mode.

phy-clock

int

 
MIPI PHY clock frequency. Should be set to ensure clock frequency is at least (pixel clock * bits per output pixel) / number of mipi data lanes