nxp,imx-mipi-dsi

Vendor: NXP Semiconductors

Description

These nodes are “mipi-dsi” bus nodes.

NXP MCUX MIPI DSI

Properties

Properties not inherited from the base binding file.

Name

Type

Details

nxp,lcdif

phandle

Instance of the LCDIF peripheral. Only required when using the MIPI DSI in video mode.

dpi-color-coding

string

MIPI DPI interface color coding. Sets the distribution of RGB bits within the 24-bit d bus, as specified by the DPI specification.

Legal values: '16-bit-config-1', '16-bit-config-2', '16-bit-config-3', '18-bit-config-1', '18-bit-config-2', '24-bit'

dpi-pixel-packet

string

MIPI DSI pixel packet type send through DPI interface.

Legal values: '16-bit', '18-bit', '18-bit-loose', '24-bit'

dpi-video-mode

string

DPI video mode.

Legal values: 'non-burst-sync-pulse', 'non-burst-sync-event', 'burst'

dpi-bllp-mode

string

Behavior in BLLP (Blanking or Low-Power Interval).

Legal values: 'low-power', 'blank', 'null'

autoinsert-eotp

boolean

Automatically insert an EoTp short packet when switching from HS to LP mode.

dphy-ref-frequency

int

Maximum clock speed supported by the device, in Hz.

This property is required.

phy-clock

int

MIPI PHY clock frequency. Should be set to ensure clock frequency is at least (pixel clock * bits per output pixel) / number of mipi data lanes