worldsemi,ws2812-gpio

Vendor: Worldsemi Co., Limited

Description

Worldsemi WS2812 LED strip, GPIO binding

Driver bindings for bit-banging a WS2812 or compatible LED strip.

The GPIO driver uses inline assembly, and isn't available for all
boards.

Properties

Properties not inherited from the base binding file.

Name

Type

Details

in-gpios

phandle-array

GPIO phandle and specifier for the pin connected to the daisy
chain's input pin. Exactly one pin should be given.

This property is required.

chain-length

int

The number of devices in the daisy-chain.

This property is required.

color-mapping

array

Channel to color mapping (or pixel order).

For example a GRB channel to color mapping would be

   color-mapping = <LED_COLOR_ID_GREEN
                    LED_COLOR_ID_RED
                    LED_COLOR_ID_BLUE>;

This property is required.

reset-delay

int

Minimum delay to wait (in microseconds) to make sure that the strip has
latched the signal. If omitted, a default value of 8 microseconds is used.
This default is good for the WS2812 controllers. Note that despite the
WS2812 datasheet states that a 50 microseconds delay is required, it seems
6 microseconds is enough. The default is set to 8 microseconds just to be
safe.

Default value: 8