panasonic,reduced-arduino-header

Vendor: Panasonic Corporation

Description

Panasonic's reduced Arduino header.

                              D15    21
                              D14    20
                              AREF   -
                              GND    -
    -   N/C                   D13    19
    -   IOREF                 D12    18
    -   RESET                 D11    17
    -   3V3                   D10    16
    -   5V                    D9     NC
    -   GND                   D8     NC
    -   GND
    -   VIN                   D7     NC
                              D6     NC
    0   A0                    D5     11
    1   A1                    D4     10
    2   A2                    D3     9
    3   A3                    D2     8
    NC  A4                    D1     7
    NC  A5                    D0     6

Panasonic's reduced Arduino header is based on the Arduino UNO layout
and provides four different headers. The main difference is that some
pins are not available due to the lack of pins on the Panasonic module.
These unconnected pins are labeled "NC" in the mapping above.

So:

1. Power Supply header exactly, like on Arduino UNO layout.

2. Analog Input header, like on Arduino UNO layout, but A4 and A5 are
not connected.

3. 8-pin header (opposite Analog Input).  Digital input signals, like on
Arduino UNO layout, labeled from D0 at the bottom to D7 at the top, but D6
and D7 are not connected.

4. 10-pin header (opposite Power Supply). Digital input signals, like on
Arduino UNO layout, labeled from D8 at the bottom through D15 at the top,
but D8 and D9 are not connected.

Properties

Properties not inherited from the base binding file.

Name

Type

Details

gpio-map

compound

This property is required.

gpio-map-mask

compound

gpio-map-pass-thru

compound

#gpio-cells

int

Number of items to expect in a GPIO specifier

This property is required.