R-CAR Salvator XS M3 ARM CA57 (ARMv8)

Overview

The R-Car M3-W is an SOC that features the basic functions for next-generation car navigation systems.

Hardware

The R-Car M3-W includes:

  • two 1.5-GHz ARM Cortex-A57 MPCore cores;

  • four 1.3-GHz ARM Cortex-A53 MPCore cores,

  • memory controller for LPDDR4-3200 with 32 bits x 2 channels;

  • 1 channels for HDMI1.4b output and 1 channel for RGB888 output and 1channel for LVDS;

  • 2 channels MIPI-CSI2 Video Input, 2 channels digital Video Input;

  • USB3.0 x 1ch and USB2.0 x 2ch interfaces;

  • 800-MHz ARM Cortex-R7 core;

  • two- and three-dimensional graphics engines;

  • video processing units;

  • sound processing units;

  • MediaLB interface;

  • SD card host interface;

  • USB3.0 and USB2.0 interfaces;

  • PCI Express interface;

  • CAN interface;

  • EtherAVB.

Supported Features

The Renesas rcar_salvator_xs_m3 board configuration supports the following hardware features:

Interface

Driver/components

Support level

PINCTRL

pinctrl

CLOCK

clock_control

UART

uart

serial port-polling

Other hardware features have not been enabled yet for this board.

The default configuration can be found in the defconfig file:

boards/arm64/rcar_salvator_xs_m3/rcar_salvator_xs_m3_defconfig

Programming and Debugging

Build and flash applications as usual (see Building an Application and Run an Application for more details).

References