.. _m2gl025-miv: Microchip M2GL025 Mi-V ###################### Overview ******** The Microchip M2GL025 board is an IGLOO2 FPGA based development board. The Mi-V RISC-V soft CPU can be deployed on the MGL025 board. More information can be found on `Microchip's website `_. Programming and debugging ************************* Building ======== Applications for the ``m2gl025_miv`` board configuration can be built as usual (see :ref:`build_an_application`): .. zephyr-app-commands:: :board: m2gl025_miv :goals: build Flashing ======== In order to upload the application to the device, you'll need OpenOCD and GDB with RISC-V support. You can get them as a part of SoftConsole SDK. Download and installation instructions can be found on `Microchip's SoftConsole website `_. With the necessary tools installed, you can connect to the board using OpenOCD. To establish an OpenOCD connection run: .. code-block:: bash sudo LD_LIBRARY_PATH=/openocd/bin \ /openocd/bin/openocd --file \ /openocd/share/openocd/scripts/board/microsemi-riscv.cfg Leave it running, and in a different terminal, use GDB to upload the binary to the board. You can use the RISC-V GDB from a toolchain delivered with SoftConsole SDK. Here is the GDB terminal command to connect to the device and load the binary: .. code-block:: console /riscv-unknown-elf-gcc/bin/riscv64-unknown-elf-gdb \ -ex "target extended-remote localhost:3333" \ -ex "set mem inaccessible-by-default off" \ -ex "set arch riscv:rv32" \ -ex "set riscv use_compressed_breakpoints no" \ -ex "load" Debugging ========= Refer to the detailed overview of :ref:`application_debugging`.