st,stm32-ospi

Vendor: STMicroelectronics

Description

These nodes are “ospi” bus nodes.

STM32 OSPI device representation. Enabling a stm32 octospi node in a board
description would typically requires this:

    &octospi {
        pinctrl-0 = <&octospi_clk_pe9 &octospi_ncs_pe10 &octospi_dqs_pe11
                     &octospi_io0_pe12 &octospi_io1_pe13
                     &octospi_io2_pe14 &octospi_io3_pe15
                     &octospi_io4_pe16 &octospi_io5_pe17
                     &octospi_io6_pe18 &octospi_io7_pe19>;

        dmas = <&dma1 5 41 0x10000>;
        dma-names = "tx_rx";

        status = "okay";
    };

Properties

Properties not inherited from the base binding file.

Name

Type

Details

pinctrl-0

phandles

Pin configuration/s for the first state. Content is specific to the
selected pin controller driver implementation.

This property is required.

pinctrl-names

string-array

Names for the provided states. The number of names needs to match the
number of states.

This property is required.

pinctrl-1

phandles

Pin configuration/s for the second state. See pinctrl-0.

pinctrl-2

phandles

Pin configuration/s for the third state. See pinctrl-0.

pinctrl-3

phandles

Pin configuration/s for the fourth state. See pinctrl-0.

pinctrl-4

phandles

Pin configuration/s for the fifth state. See pinctrl-0.