.. _ncs_release_notes_170: |NCS| v1.7.0 Release Notes ########################## .. contents:: :local: :depth: 2 |NCS| delivers reference software and supporting libraries for developing low-power wireless applications with Nordic Semiconductor products. It includes the TF-M, MCUboot and the Zephyr RTOS open source projects, which are continuously integrated and re-distributed with the SDK. The |NCS| is where you begin building low-power wireless applications with Nordic Semiconductor nRF52, nRF53, and nRF91 Series devices. nRF53 Series devices are now supported for production. Wireless protocol stacks and libraries may indicate support for development or support for production for different series of devices based on verification and certification status. See the release notes and documentation for those protocols and libraries for further information. Highlights ********** * Development support for multi-image DFU for nRF53 - simultaneous application and network core firmware update. * :ref:`ug_radio_fem` for the nRF21540 FEM range extender is now supported for production. * :ref:`direct_test_mode` and :ref:`radio_test` sample support. * Support for Bluetooth® LE, Thread, Zigbee, and multiprotocol applications and samples using :ref:`nrfxlib:mpsl`. * Support for :ref:`nRF21540 development kit (DK) `, :ref:`nRF21540 evaluation kit (EK) ` and custom board configurations. * Added Wi-Fi coexistence feature supported for development for Thread and Zigbee. * Added support for NFC and *pair before use* type of accessories to the Apple Find My add-on. * Added support for the |NCS| development in Visual Studio Code with the nRF Connect for Visual Studio Code extension. * Added production support for nRF52833 for Bluetooth® LE HomeKit accessories. * For Bluetooth® mesh, the choice of default Bluetooth® LE Controller changed from Zephyr Bluetooth® LE Controller to SoftDevice Controller. * Bluetooth® mesh profiles and models are ready for production. * Updated the required :ref:`minimum CMake version ` to 3.20.0. * Enabled a more flexible way of handling AT notifications with the modem through the new :ref:`at_monitor_readme` library on the nRF9160. Also added the related :ref:`at_monitor_sample` sample. * nRF Connect for Cloud is now nRF Cloud. * Added support for using `nRF Cloud Location Services`_ through REST and JWT for the nRF9160. .. note:: Programming nRF52832 revision 3 and nRF52840 revision 3 devices requires nrfjprog version 10.13 or newer. nrfjprog is part of the `nRF Command Line Tools`_. Release tag *********** The release tag for the |NCS| manifest repository (|ncs_repo|) is **v1.7.0**. Check the :file:`west.yml` file for the corresponding tags in the project repositories. To use this release, check out the tag in the manifest repository and run ``west update``. See :ref:`cloning_the_repositories` for more information. Supported modem firmware ************************ See `Modem firmware compatibility matrix`_ for an overview of which modem firmware versions have been tested with this version of the |NCS|. Use the latest version of the nRF Programmer app of `nRF Connect for Desktop`_ to update the modem firmware. See :ref:`nrf9160_gs_updating_fw_modem` for instructions. Known issues ************ See `known issues for nRF Connect SDK v1.7.0`_ for the list of issues valid for this release. Changelog ********* The following sections provide detailed lists of changes by component. nRF9160 ======= * Added: * :ref:`at_monitor_readme` library that lets you reschedule and dispatch AT notifications from the Modem library AT interface to AT monitors. * :ref:`at_monitor_sample` sample that shows the usage of the :ref:`at_monitor_readme` library. * :ref:`lib_nrf_cloud_rest` library that enables devices to use nRF Cloud's REST-based device API. * Updated: * All samples * All samples built for the nRF9160 SoC now have the :ref:`nrf_modem` enabled by default. * :ref:`lib_nrf_cloud` library: * Added function :c:func:`nrf_cloud_uninit`, which can be used to uninitialize the nRF Cloud library. If cloud API is used, call :c:func:`cloud_uninit`. * Added function :c:func:`nrf_cloud_shadow_device_status_update`, which sets the device status in the device's shadow. * Added function :c:func:`nrf_cloud_modem_info_json_encode`, which encodes modem information into a cJSON object formatted for use with nRF Cloud. * Added function :c:func:`nrf_cloud_service_info_json_encode`, which encodes service information into a cJSON object formatted for use with nRF Cloud. * Added function :c:func:`nrf_cloud_client_id_get`, which returns the client ID used to identify the device with nRF Cloud. * Added function :c:func:`nrf_cloud_tenant_id_get`, which returns the tenant ID used to identify a customer account with nRF Cloud. * Added function :c:func:`nrf_cloud_register_gateway_state_handler` to implement a custom callback on shadow update events. * Added Kconfig option :kconfig:option:`CONFIG_NRF_CLOUD_GATEWAY`, which enables functionality to behave as an nRF Cloud gateway. * Added the option to use the P-GPS API independent of nRF Cloud MQTT transport. * Implemented functionality for the :c:enumerator:`NRF_CLOUD_EVT_SENSOR_DATA_ACK` event. The event is now generated when a valid tag value (NCT_MSG_ID_USER_TAG_BEGIN through NCT_MSG_ID_USER_TAG_END) is provided with the sensor data when calling either :c:func:`nrf_cloud_sensor_data_send` or :c:func:`nrf_cloud_shadow_update`. * Updated :c:func:`nrf_cloud_shadow_update` to expect that ``param->data.ptr`` points to a JSON string. Previously, a cJSON object was expected. * Updated :c:func:`nct_init` to perform FOTA initialization before setting the client ID. This fixes an issue that prevented an expected reboot during a modem FOTA update. * Removed the function ``nrf_cloud_sensor_attach()``, the associated structure ``nrf_cloud_sa_param``, and the event ``NRF_CLOUD_EVT_SENSOR_ATTACHED``. These items provided no useful functionality. * :ref:`serial_lte_modem` application: * Added IPv6 support to all SLM services. * Added the GNSS service to replace the existing GPS test functionality. * Added the optional support of location services from nRF Cloud, such as A-GPS, P-GPS, and cellular positioning. * Removed datatype in all sending AT commands. If no sending data is specified, switch data mode to receive and send any arbitrary data. * Added the :ref:`slm_data_mode` documentation page to explain the data mode mechanism and how it works. * Added the :ref:`SLM_AT_FOTA` documentation page to describe the FOTA service. * :ref:`asset_tracker_v2` application: * Changed the custom module responsible for controlling the LEDs to the :ref:`LEDs module ` from :ref:`lib_caf`. * Added support for A-GPS when configuring the application for AWS IoT. * Added support for P-GPS when configuring the application for AWS IoT. * Added a new :ref:`debug module ` that implements support for `Memfault`_. * Added support for the :ref:`liblwm2m_carrier_readme` library. * :ref:`liblwm2m_carrier_readme` library: * Added deferred event reason :c:macro:`LWM2M_CARRIER_DEFERRED_SERVICE_UNAVAILABLE`, which indicates that the LwM2M server is unavailable due to maintenance. * Removed error code :c:macro:`LWM2M_CARRIER_ERROR_SERVICE_UNAVAILABLE`, which was used incorrectly to indicate a deferred event reason. * :ref:`lwm2m_carrier` sample - Adjusted the messages printed in :c:func:`lwm2m_carrier_event_handler` to reflect the updated event definitions in the :ref:`liblwm2m_carrier_readme` library. * :ref:`lte_lc_readme` library - Added API to enable modem domain events. * :ref:`lib_modem_jwt` library - Updated :c:func:`modem_jwt_generate` to ensure the generated JWT has ``base64url`` encoding. * Board names: * The ``nrf9160dk_nrf9160ns`` and the ``nrf5340dk_nrf5340_cpuappns`` boards have been renamed respectively to ``nrf9160dk_nrf9160_ns`` and ``nrf5340dk_nrf5340_cpuapp_ns``, in a change inherited from upstream Zephyr. * The ``thingy91_nrf9160ns`` board has been renamed to ``thingy91_nrf9160_ns`` for consistency with the changes inherited from upstream Zephyr. * Deprecated: * nRF9160: Asset Tracker has been deprecated in favor of :ref:`asset_tracker_v2`. * ``at_notif`` library has been deprecated in favor of the :ref:`at_monitor_readme` library. * ``at_cmd`` library has been deprecated in favor of Modem library's native AT interface. * GPS driver has been deprecated in favor of the :ref:`nrfxlib:gnss_interface`. nRF5 ==== The following changes are relevant for the nRF52 and nRF53 Series. nRF Desktop ----------- * Added: * Added a functionality to clear the button state reported over Bluetooth® LE if the USB was connected while the button was pressed. This fixes an issue related to reporting wrong button state over Bluetooth® LE. * Added support for HID keyboard LED output report. The report is handled by the nRF Desktop peripherals and forwarded by the nRF Desktop dongles. * Added support for nRF5340 DK working as an nRF Desktop dongle. * Added a functionality for forwarding HID boot reports in :ref:`nrf_desktop_hid_forward`. * Added GPIO LEDs to the ``nrf52820dongle_nrf52820`` board. * Updated: * Changed settings backend from FCB to NVS. * Switched to using :ref:`caf_power_manager`. * Fixed an issue with generating motion in :ref:`nrf_desktop_motion` (``motion_buttons`` and ``motion_simulated``) while the HID boot protocol was in use. * Fixed an issue where the :ref:`nrf_desktop_usb_state` and the :ref:`nrf_desktop_hids` modules might forward the HID input reports related to an old protocol after changing the protocol mode. Bluetooth® LE ------------- * Added: * Production support for :ref:`nRF21540 GPIO ` for both nRF52 and nRF53 Series. * :ref:`rscs_readme` - This module implements the Running Speed and Cadence Service (RSCS) with the corresponding set of characteristics. * :ref:`peripheral_rscs` sample - This sample demonstrates how to use the Running Speed and Cadence Service (RSCS). * Experimental implementation of the UART async adapter extension inside the :ref:`peripheral_uart` sample. * Updated: * :ref:`ble_samples` - Changed the Bluetooth® sample Central DFU SMP name to :ref:`Central SMP Client `. * :ref:`direction_finding_connectionless_rx` and :ref:`direction_finding_connectionless_tx` samples - Added default configuration for ``nrf52833dk_nrf52820`` and ``nrf5340dk_nrf5340_cpuapp``, and ``nrf5340dk_nrf5340_cpuapp_ns`` boards. * :ref:`direct_test_mode` - Added an automatic build of the :ref:`nrf5340_empty_app_core` sample, when building for ``nrf5340dk_nrf5340_cpunet``. * Fixed the NCSDK-9820 known issue in the :ref:`peripheral_lbs` sample. When **Button 1** was pressed and released while holding one of the other buttons, the notification for release was the same as for press. * Fixed an issue in the :ref:`gatt_dm_readme` library where a memory fault could happen if a peer device disconnected during the service discovery process. * :ref:`lbs_readme` library - Added write request data validation in the LED characteristic. Bluetooth mesh -------------- * Added: * The choice of default Bluetooth® LE Controller changed from Zephyr Bluetooth® LE Controller to SoftDevice Controller. * Bluetooth® mesh profiles and models are ready for production. * Updated: * Updated the :ref:`bt_mesh_light_hsl_srv_readme` and the :ref:`bt_mesh_light_xyl_srv_readme` models to no longer extend the :ref:`bt_mesh_lightness_srv_readme` model, and instead get a pointer to this model in the initialization macro. * Updated samples with support for the :ref:`zephyr:thingy53_nrf5340`. * Fixed an issue where beacons were stopped being sent after node reset. * Fixed an issue where the IV update procedure could be started immediately after the device has been provisioned. * Fixed multiple issues in the :ref:`bt_mesh_sensor_types_readme` module. * Migration: * The model opcode callback :c:member:`bt_mesh_model_op.func` is changed to return an error code if the message processing has failed. If you have implemented your own models, make sure to update opcode handlers of those models. * :ref:`bt_mesh_scene_srv_readme` now extends :ref:`bt_mesh_dtt_srv_readme`. If you are using the Scene Server, make sure that the Generic Default Transition Time Server instance is present on the element that is equal to or lower than the Scene Server's element. * :ref:`bt_mesh_light_hsl_srv_readme` and :ref:`bt_mesh_light_xyl_srv_readme` no longer instantiate the :ref:`bt_mesh_lightness_srv_readme` through :c:macro:`BT_MESH_MODEL_LIGHT_HSL_SRV` and :c:macro:`BT_MESH_MODEL_LIGHT_XYL_SRV` macros respectively. Macros :c:macro:`BT_MESH_LIGHT_XYL_SRV_INIT` and :c:macro:`BT_MESH_LIGHT_HSL_SRV_INIT` now take a pointer to the :c:struct:`bt_mesh_lightness_srv` instance instead. Make sure to instantiate the Light Lightness Server if you are using any of these models. ESB --- * Updated: * Modified the ESB interrupts configuration to reduce the ISR latency and enable scheduling decision in the interrupt context. Front-end module (FEM) ---------------------- * Added support for the nRF21540 GPIO interface to the nRF5340 network core. * Added support for RF front-end Modules (FEM) for nRF5340 in the :ref:`mpsl` library. The front-end module feature for nRF5340 in MPSL currently supports nRF21540, but does not support the SKY66112-11 device. * Added a device tree shield definition for the nRF21540 Evaluation Kit with the :ref:`related documentation `. Matter ------ * Added: * :ref:`Thingy:53 weather station ` application. * :ref:`Template ` sample with a guide about :ref:`ug_matter_creating_accessory`. * :ref:`ug_matter_tools` page with information about building options for Matter controllers. * PA/LNA GPIO interface support for RF front-end modules (FEM) in Matter. * :doc:`Matter documentation set ` based on the documentation from the Matter submodule. nRF IEEE 802.15.4 radio driver ------------------------------ * Added: * :ref:`802154_phy_test` sample, with an experimental Antenna Diversity functionality. * Wi-Fi coexistence functionality supported for development. * Updated :c:macro:`NRF_802154_SWI_PRIORITY`, :c:macro:`NRF_802154_ECB_PRIORITY`, and :c:macro:`NRF_802154_SL_RTC_IRQ_PRIORITY` to comply with the limitation introduced in the :ref:`nRF 802.15.4 radio driver ` in nrfxlib. Thread ------ * Added: * Added support for nRF21540 for nRF52 Series and nRF53 Series, including Bluetooth® LE in the multiprotocol configuration. * Improvements in :ref:`thread_ug_supported_features_v12`: * Thread 1.2 supported in all samples. * Retransmissions are now supported when transmission security is handled by the radio driver. * Support for CSL Accuracy TLV in the MLE Parent Response. * Link Metrics data is now properly updated when using ACK-based Probing. * Added support for Thread Backbone Border Router on the :ref:`thread_architectures_designs_cp_rcp` architecture. * Updated: * :ref:`ot_cli_sample` sample - Updated with the USB support. * :ref:`ot_coprocessor_sample` sample - Updated with the USB support. * :ref:`thread_ot_memory` - Updated memory requirements values. * Removed ``NET_SHELL`` from the Thread samples due to its limited usefulness. Zigbee ------ * In this release, Zigbee is supported for development and should not be used for production. The |NCS| v1.5.1 contains the certified Zigbee solution supported for production. * Added: * Added production support for :ref:`radio front-end module (FEM) ` for nRF52 Series devices and nRF21540 EK. * Added development support for :ref:`radio front-end module (FEM) ` for nRF53 Series devices and nRF21540 EK. * Added development support for ``nrf5340dk_nrf5340_cpuapp`` to the :ref:`zigbee_ncp_sample` sample. * :ref:`lib_zigbee_zcl_scenes` library with documentation. This library was separated from the Zigbee light bulb sample. * :ref:`zigbee_template_sample` sample. This minimal Zigbee router application can be used as the starting point for developing custom Zigbee devices. * Added user guide about :ref:`ug_zigee_adding_clusters` that is based on the new template sample. * Added API for vendor-specific NCP commands. See the :ref:`Zigbee NCP sample ` page for more information. * Added API for Zigbee command for getting active nodes. * Updated: * ZBOSS Zigbee stack to version 3.8.0.1+4.0.0. See the :ref:`nrfxlib:zboss_changelog` in the nrfxlib documentation for detailed information. * :ref:`ug_zigbee_tools_ncp_host` is now supported for production and updated to version 1.0.0. * :ref:`zigbee_ug_logging_stack_logs` - Improved printing ZBOSS stack logs. Added new backend options to print ZBOSS stack logs with option for using binary format. * Fixed the KRKNWK-9743 known issue where the timer could not be stopped in Zigbee routers and coordinators. * Fixed the KRKNWK-10490 known issue that would cause a deadlock in the NCP frame fragmentation logic. * Fixed the KRKNWK-6071 known issue with inaccurate ZBOSS alarms. * Fixed the KRKNWK-5535 known issue where the device would assert if flooded with multiple Network Address requests. * Fixed an issue where the |NCS| would assert in the host application when the host started just after SoC's SysReset. Other samples ------------- * :ref:`radio_test` - Added an automatic build of the :ref:`nrf5340_empty_app_core` sample, when building for ``nrf5340dk_nrf5340_cpunet``. Common ====== The following changes are relevant for all device families. Build system ------------ * Bugfixes: * Fixed a bug where :file:`dfu_application.zip` would not be updated after rebuilding the code with changes. Common Application Framework (CAF) ---------------------------------- * Added :ref:`caf_net_state`. * Added :ref:`caf_power_manager`. * Updated :ref:`caf_sensor_manager` with a limit to the number of ``sensor_event`` events that it submits. Edge Impulse ------------ * Added support for Thingy:53 to :ref:`nrf_machine_learning_app`. * Added configuration for nRF52840 DK that supports data forwarder over NUS to :ref:`nrf_machine_learning_app`. NFC --- * Updated the NFCT interrupt configuration to reduce the ISR latency and enable scheduling decision in the interrupt context. * Updated the :ref:`nfc_uri` library to allow encoding of URI strings longer than 255 characters. Pelion ------ * Updated Pelion Device Management Client library version to 4.10.0. * Switched to using :ref:`caf_power_manager` and :ref:`caf_net_state` in the nRF Pelion Client application. * Updated the nRF Pelion Client application documentation with a step that requires downloading Pelion development tools. Profiler -------- * Added profiling string data. * Optimized numeric data encoding. Trusted Firmware-M ------------------ * Added a test case for the secure read service that verifies that only addresses within the accepted range can be read. * Updated :file:`tfm_platform_system.c` to fix a bug that returned ``TFM_PLATFORM_ERR_SUCCESS`` instead of ``TFM_PLATFORM_ERR_INVALID_PARAM`` when the address passed is outside of the accepted read range. sdk-nrfxlib ----------- * Updated the default :ref:`nrf_rpc` transport backend to use the RPMsg Service library. See the changelog for each library in the :doc:`nrfxlib documentation ` for additional information. Crypto ++++++ * Updated the nrf_cc3xx_platform/nrf_cc3xx_mbedcrypto library to version 0.9.11. For full information, see :ref:`crypto_changelog_nrf_cc3xx_platform` and :ref:`crypto_changelog_nrf_cc3xx_mbedcrypto`. Modem library +++++++++++++ * Added: * Added a new API for AT commands. See :ref:`nrfxlib:nrf_modem_at` for more information. * Added a new API for modem delta firmware updates. See :ref:`nrfxlib:nrf_modem_delta_dfu` for more information. * Updated: * Updated :ref:`nrf_modem` to version 1.3.0. See the :ref:`nrfxlib:nrf_modem_changelog` for detailed information. * Deprecated: * The AT socket API is now deprecated. * The DFU socket API is now deprecated. nRF IEEE 802.15.4 radio driver ++++++++++++++++++++++++++++++ * Modified the 802.15.4 Radio Driver Transmit API. For full information, see :ref:`nrf_802154_changelog`. MCUboot ======= The MCUboot fork in |NCS| (``sdk-mcuboot``) contains all commits from the upstream MCUboot repository up to and including ``680ed07``, plus some |NCS| specific additions. The code for integrating MCUboot into |NCS| is located in :file:`ncs/nrf/modules/mcuboot`. The following list summarizes the most important changes inherited from upstream MCUboot: * Added support for simultaneous multi-image DFU for the nRF53 Series. For more information, see the :ref:`ug_nrf5340` and :ref:`ug_thingy53` user guides. * Added AES support for image encryption (based on mbedTLS). * MCUboot serial: Ported encoding to use the cddl-gen module (which removes dependency on the `TinyCBOR`_ library). * bootutil_public library: Made ``boot_read_swap_state()`` declaration public. Mcumgr ====== The mcumgr library contains all commits from the upstream mcumgr repository up to and including snapshot ``657deb65``. The following list summarizes the most important changes inherited from upstream mcumgr: * Added support for simultaneous multi-image DFU for the nRF53 Series. For more information, see the :ref:`ug_nrf5340` and :ref:`ug_thingy53` user guides. * Fixed an issue with SMP file management commands that would fail to read or write files, or both. Zephyr ====== .. NOTE TO MAINTAINERS: All the Zephyr commits in the below git commands must be handled specially after each upmerge and each NCS release. The Zephyr fork in |NCS| (``sdk-zephyr``) contains all commits from the upstream Zephyr repository up to and including ``14f09a3b00``, plus some |NCS| specific additions. For a complete list of upstream Zephyr commits incorporated into |NCS| since the most recent release, run the following command from the :file:`ncs/zephyr` repository (after running ``west update``): .. code-block:: none git log --oneline 14f09a3b00 ^v2.6.0-rc1-ncs1 For a complete list of |NCS| specific commits, run: .. code-block:: none git log --oneline manifest-rev ^14f09a3b00 Matter (Project CHIP) ===================== The Matter fork in the |NCS| (``sdk-connectedhomeip``) contains all commits from the upstream Matter repository up to, and including, ``b77bfb047374b7013dbdf688f542b9326842a39e``. The following list summarizes the most important changes inherited from the upstream Matter: * Added: * Support for Certificate-Authenticated Session Establishment (CASE) for communication among operational Matter nodes. * Support for OpenThread's DNS Client to enable Matter node discovery on Thread devices. * Updated: * Fixed the known issue KRKNWK-10387 where Matter service was needlessly advertised over Bluetooth® LE during DFU. Now if Matter pairing mode is not opened and the Bluetooth® LE advertising is needed due to DFU requirements, only the SMP service is advertised. Partition Manager ================= * Reworked how external flash memory support is enabled. The MCUboot secondary partition can now be placed in external flash memory without modifying any |NCS| files. Documentation ============= In addition to documentation related to the changes listed above, the following documentation has been updated: * General changes: * Added cross-search functionality to the documentation search feature available at the top-left corner of each documentation page. Searching now parses all :ref:`documentation sets ` pages and displays the results for each set. For example, results from the :ref:`nrfxlib:nrfxlib` documentation set will be listed with ``nrfxlib >>`` before the page title. * Updated the pages in the :ref:`getting_started` section with information about the support for the new Visual Studio Code extension. * Updated the style and formatting of all figures across all documentation pages. * Added new documentation sets for `Trusted Firmare-M `_ and :doc:`Matter `. * Split the "Applications and samples" section into :ref:`applications` and :ref:`samples`. * Renamed nRF Connect for Cloud to nRF Cloud. * Updated the FEM support section for the samples that offer this feature. * Implemented several formatting and style updates for consistency reasons. * Added pages: * Added the :ref:`ug_thingy53` user guide. * Added the :ref:`ug_nrf_cloud` user guide. * Added :ref:`serial_lte_modem` application pages: * :ref:`slm_data_mode` page * :ref:`SLM_AT_FOTA` page * :ref:`SLM_AT_SOCKET` page * :ref:`SLM_AT_GNSS` page * Added the :ref:`matter_weather_station_app` application page. * Added the :ref:`crypto_tls` sample page. * Added the :ref:`gatt_pool_readme` library page. * Added the :ref:`rscs_readme` library page. * Added documentation pages for the following Zigbee libraries: * :ref:`lib_zigbee_osif` * :ref:`lib_zigbee_zcl_scenes` * :ref:`lib_zigbee_error_handler` * Updated pages: * :ref:`glossary` - Added definition for new terms, such as Attribute Protocol, CMSIS, GAP, and GATT. * :ref:`getting_started` section pages: * :ref:`gs_recommended_versions` - Now includes information about the supported operating systems, previously listed on a separate page. * :ref:`gs_assistant` - Added information about Toolchain manager being available for macOS and steps for building from SEGGER Embedded Studio. * :ref:`gs_installing` - Added information about the version folder created when extracting the GNU Arm Embedded Toolchain and applied minor fixes based on usability testing (for example, to the Linux installation instructions). * :ref:`ug_app_dev` section pages: * :ref:`ug_multi_image` - Updated with the section about Child image devicetree overlays. * :ref:`ug_radio_fem` - Updated for the nRF21540 release. * :ref:`ug_nrf91` user guide - Restructured into several subpages. * :ref:`ug_nrf5340` user guide - Reworked with major updates. * :ref:`protocols` section pages: * :ref:`ug_matter` pages: * :ref:`ug_matter_tools` - New page. * :ref:`ug_matter_creating_accessory` - New page. * :ref:`ug_thread` pages: * :ref:`ug_thread_configuring` - Updated with new configuration options. * :ref:`thread_ug_supported_features` - Updated with new supported features. * :ref:`ug_thread_tools` - Updated the section about :ref:`ug_thread_tools_tbr_rcp` and added the Running the OpenThread POSIX applications section. * :ref:`ug_zigbee` pages: * :ref:`ug_zigbee_configuring` - Updated the :ref:`zigbee_ug_logging` section. * :ref:`zigbee_memory` - Updated the memory values for the latest release. * :ref:`applications` section pages: * :ref:`asset_tracker_v2` pages: * Restructured the single application page into several subpages. * Updated with information about using the LwM2M carrier library. * Updated the device modes section. * Added links and information about A-GPS and P-GPS support with nRF Cloud. * :ref:`serial_lte_modem` pages: * Removed the GPS AT commands page. * :ref:`samples` section pages: * :ref:`ble_samples`: * :ref:`bluetooth_central_dfu_smp` - Page added. Replaces Central DFU SMP sample. * :ref:`direction_finding_connectionless_rx` - Updated with the section about Constant Tone Extension transmit and receive parameters. * :ref:`matter_samples`: * Removed the weather station sample page for Matter. The sample has been upgraded to application. * :ref:`nrf9160_samples`: * :ref:`http_full_modem_update_sample` - Updated with the description of its customization options for firmware files. * :ref:`zigbee_samples`: * :ref:`zigbee_ncp_sample` - Updated with information about logging ZBOSS traces and about vendor-specific commands. * :ref:`libraries` section pages: * :ref:`nrf_profiler` - Several updates. * :ref:`documentation` section pages: * :ref:`doc_build` - Updated the documentation building procedure. * :ref:`doc_styleguide` - Simplified the guidelines. nrfxlib ------- * :ref:`nrfxlib:mpsl` section pages: * :ref:`nrfxlib:mpsl_clock` - Page added. * :ref:`nrfxlib:mpsl_cx` - Page added. * :ref:`nrfxlib:mpsl_fem` - Updated the nRF21540 usage section. * :ref:`nrfxlib:mpsl_lib` - Updated different parts of the entire page. * :ref:`nrfxlib:nrf_802154` section pages: * :ref:`nrfxlib:radiodriver_api` - Page added. * :ref:`nrfxlib:rd_feature_description` - Updated the Performing retransmissions section. * :ref:`nrf_modem` section pages: * :ref:`nrfxlib:nrf_modem_api` - Updated with new API sections. * :ref:`full_dfu` - Updated with major changes. * Renamed the "AT commands" page to ``AT socket``. * :ref:`nrfxlib:nrf_modem_at` - Page added. * :ref:`nrfxlib:nrf_modem_delta_dfu` - Page added.