MIPS Malta Emulation (QEMU)

Overview

This board configuration will use QEMU to emulate the MIPS Malta platform.

This configuration provides support for an MIPS 4Kc/24Kc CPU cores and these devices:

  • CP0 Interrupt Controller

  • CP0 Core Timer

  • NS16550 UART

Note

This board configuration makes no claims about its suitability for use with an actual MIPS Malta hardware system, or any other hardware system.

Hardware

Supported Features

The following hardware features are supported:

Interface

Controller

Driver/Component

CP0 IntC

on-chip

interrupt controller

CP0 Core Timer

on-chip

system clock

NS16550 UART

FPGA

serial port

The kernel currently does not support other hardware features on this platform.

Devices

System Clock

Qemu CP0 timer uses a clock frequency of 200 MHz, see target/mips/cp0_timer.c in Qemu source tree for details.

Serial Port

This board configuration uses a single serial communication channel with the FPGA UART2.

Programming and Debugging

Use this configuration to run basic Zephyr applications and kernel tests in the QEMU emulated environment, for example, with the Synchronization Sample:

# From the root of the zephyr repository
west build -b qemu_malta samples/synchronization
west build -t run

This will build an image with the synchronization sample app, boot it using QEMU, and display the following console output:

*** Booting Zephyr OS build v2.7.99-1627-g9bea7790d620  ***
thread_a: Hello World from cpu 0 on qemu_malta!
thread_b: Hello World from cpu 0 on qemu_malta!
thread_a: Hello World from cpu 0 on qemu_malta!
thread_b: Hello World from cpu 0 on qemu_malta!
thread_a: Hello World from cpu 0 on qemu_malta!
thread_b: Hello World from cpu 0 on qemu_malta!
thread_a: Hello World from cpu 0 on qemu_malta!
thread_b: Hello World from cpu 0 on qemu_malta!
thread_a: Hello World from cpu 0 on qemu_malta!
thread_b: Hello World from cpu 0 on qemu_malta!

Exit QEMU by pressing CTRL+A x.

Big-Endian

Use this configuration to run Synchronization Sample in big-endian mode:

# From the root of the zephyr repository
west build -b qemu_malta_be samples/synchronization
west build -t run

References

https://www.qemu.org/ https://www.linux-mips.org/wiki/MIPS_Malta