cypress,psoc6-uart

Vendor: Cypress Semiconductor Corporation

Description

These nodes are “uart” bus nodes.

Cypress SCB[UART]

Properties

Properties not inherited from the base binding file.

Name

Type

Details

peripheral-id

int

peripheral ID

This property is required.

pinctrl-0

phandles

Port pin configuration for RX & TX signals.  We expect that the
phandles will reference pinctrl nodes.  These nodes will have a
nodelabel that matches the Cypress SoC HAL defines and be of the
form p<port>_<pin>_<periph><inst>_<signal>.

For example the UART on PSoC-63 Pioneer Kit would be
   pinctrl-0 = <&p5_0_uart5_rx &p5_1_uart5_tx>;

This property is required.

clock-frequency

int

Clock frequency information for UART operation

current-speed

int

Initial baud rate setting for UART

hw-flow-control

boolean

Set to enable RTS/CTS flow control at boot time

parity

string

Configures the parity of the adapter. Enumeration id 0 for none, 1 for odd
and 2 for even parity. Default to none if not specified.

Legal values: 'none', 'odd', 'even'