.. _lpcxpresso55s06:

NXP LPCXpresso55S06
###################

Overview
********

The LPCXpresso55S06 board provides the ideal platform for evaluation
of the LPC55S0x/LPC550x MCU family, based on the Arm® Cortex®-M33
architecture. Arduino® UNO compatible shield connectors are included,
with additional expansion ports around the Arduino footprint, along
with a PMod/host interface port and MikroElektronika Click module
site.

.. image:: ../../../../../../../../../zephyr/boards/arm/lpcxpresso55s06/doc/lpcxpress55s06.png
   :width: 720px
   :align: center
   :alt: LPCXpresso55S06

Hardware
********

- LPC55S06 Arm® Cortex®-M33 microcontroller running at up to 96 MHz
- 256 KB flash and 96 KB SRAM on-chip
- LPC-Link2 debug high speed USB probe with VCOM port
- MikroElektronika Click expansion option
- LPCXpresso expansion connectors compatible with Arduino UNO
- PMod compatible expansion / host connector
- Reset, ISP, wake, and user buttons for easy testing of software functionality
- Tri-color LED
- UART header for external serial to USB cable
- CAN Transceiver
- NXP FXOS8700CQ accelerometer

For more information about the LPC55S06 SoC and LPCXPresso55S06 board, see:

- `LPC55S06 SoC Website`_
- `LPC55S06 User Manual`_
- `LPCXpresso55S06 Website`_
- `LPCXpresso55S06 User Manual`_
- `LPCXpresso55S06 Development Board Design Files`_

Supported Features
==================

The lpcxpresso55s06 board configuration supports the following
hardware features:

+-----------+------------+-------------------------------------+
| Interface | Controller | Driver/Component                    |
+===========+============+=====================================+
| NVIC      | on-chip    | nested vector interrupt controller  |
+-----------+------------+-------------------------------------+
| SYSTICK   | on-chip    | systick                             |
+-----------+------------+-------------------------------------+
| IOCON     | on-chip    | pinmux                              |
+-----------+------------+-------------------------------------+
| GPIO      | on-chip    | gpio                                |
+-----------+------------+-------------------------------------+
| USART     | on-chip    | serial port                         |
+-----------+------------+-------------------------------------+
| CLOCK     | on-chip    | clock_control                       |
+-----------+------------+-------------------------------------+

Other hardware features are not currently enabled.

Currently available targets for this board are:

- *lpcxpresso55s06*

Connections and IOs
===================

The LPC55S06 SoC has IOCON registers, which can be used to configure
the functionality of a pin.

+---------+-----------------+----------------------------+
| Name    | Function        | Usage                      |
+=========+=================+============================+
| PIO0_5  | GPIO            | ISP SW4                    |
+---------+-----------------+----------------------------+
| PIO0_29 | USART           | USART RX                   |
+---------+-----------------+----------------------------+
| PIO0_30 | USART           | USART TX                   |
+---------+-----------------+----------------------------+
| PIO1_4  | GPIO            | RED LED                    |
+---------+-----------------+----------------------------+
| PIO1_6  | GPIO            | BLUE_LED                   |
+---------+-----------------+----------------------------+
| PIO1_7  | GPIO            | GREEN LED                  |
+---------+-----------------+----------------------------+
| PIO1_9  | GPIO            | USR SW3                    |
+---------+-----------------+----------------------------+
| PIO1_18 | GPIO            | Wakeup SW1                 |
+---------+-----------------+----------------------------+

System Clock
============

The LPC55S06 SoC is configured to use the internal FRO at 96MHz as a
source for the system clock. Other sources for the system clock are
provided in the SOC, depending on your system requirements.

Serial Port
===========

The LPC55S06 SoC has 8 FLEXCOMM interfaces for serial
communication. One is configured as USART for the console
and the remaining are not used.

Programming and Debugging
*************************

Build and flash applications as usual (see :ref:`build_an_application`
and :ref:`application_run` for more details).

Configuring a Debug Probe
=========================

A debug probe is used for both flashing and debugging the board. This
board is configured by default to use the LPC-Link2 CMSIS-DAP Onboard
Debug Probe, however the :ref:`pyocd-debug-host-tools` does not yet
support the LPC55S06 so you must reconfigure the board for one of the
J-Link debug probe instead.

First install the :ref:`jlink-debug-host-tools` and make sure they are
in your search path.

Then follow the instructions in
:ref:`lpclink2-jlink-onboard-debug-probe` to program the J-Link
firmware. Please make sure you have the latest firmware for this
board.

Configuring a Console
=====================

Connect a USB cable from your PC to J1 (LINK2), and use the serial
terminal of your choice (minicom, putty, etc.) with the following
settings:

- Speed: 115200
- Data: 8 bits
- Parity: None
- Stop bits: 1

Flashing
========

Here is an example for the :ref:`hello_world` application.

.. zephyr-app-commands::
   :zephyr-app: samples/hello_world
   :board: lpcxpresso55s06
   :goals: flash

Open a serial terminal, reset the board (press the RESET button), and you should
see the following message in the terminal:

.. code-block:: console

   ***** Booting Zephyr OS v3.0.0 *****
   Hello World! lpcxpresso55s06

Debugging
=========

Here is an example for the :ref:`hello_world` application.

.. zephyr-app-commands::
   :zephyr-app: samples/hello_world
   :board: lpcxpresso55s06
   :goals: debug

Open a serial terminal, step through the application in your debugger, and you
should see the following message in the terminal:

.. code-block:: console

   ***** Booting Zephyr OS zephyr-v3.0.0 *****
   Hello World! lpcxpresso55s06

.. _LPC55S06 SoC Website:
   https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpc5500-cortex-m33/lpc550x-s0x-baseline-arm-cortex-m33-based-microcontroller-family:LPC550x

.. _LPC55S06 User Manual:
   https://www.nxp.com/docs/en/user-guide/UM11424.pdf

.. _LPCxpresso55S06 Website:
   https://www.nxp.com/design/development-boards/lpcxpresso-boards/lpcxpresso-development-board-for-lpc55s0x-0x-family-of-mcus:LPC55S06-EVK

.. _LPCXpresso55S06 User Manual:
   https://www.nxp.com/docs/en/user-guide/LPCXpresso55S06UM.pdf

.. _LPCXpresso55S06 Development Board Design Files:
   https://www.nxp.com/downloads/en/design-support/LPCXPRESSSO55S06-DESIGN-FILES.zip