AWS IoT

Create a Thing in AWS IoT
Provisioning of the certificates
Configuration
API documentation

The Amazon Web Services Internet-of-Things (AWS IoT) library enables applications to connect to, and exchange messages with the AWS IoT Core service. The library supports the following technologies:

TLS secured MQTT transmission protocol
Firmware-Over-The-Air (FOTA)

To connect to AWS IoT, the following steps must be completed:

Create a Thing in AWS IoT
Provisioning of the certificates
Configuring the application

See AWS IoT Developer Guide for general information about the Amazon Web Services IoT service.

Create a Thing in AWS IoT 

Before you can use this library, you must create a Thing for your client in AWS IoT. The Thing must be connected to a security policy. For testing, you can use a permissive policy, but make sure to update the policy to be more restrictive before you go into production. See AWS IoT Developer Guide: Basic Policy Variables and AWS IoT Developer Guide: Security Best Practices for more information about policies.

To create a Thing for your device:

Log in to the AWS IoT console.
Go to Security > Policies and select Create policy.

Enter a name and define your policy. For testing purposes, you can use the following policy (click on JSON, copy, and paste it):

{
   "Version": "2012-10-17",
   "Statement": [
       {
         "Effect": "Allow",
         "Action": "iot:*",
         "Resource": "*"
       }
    ]
 }

Click Create.
Go to Manage > All devices> Things and select Create things.
Click Create Thing.
Enter a name. The default name used by the library is my-thing.

Note

If you are working with an application, that automatically sets the client ID to the IMEI of the device at run-time, you must locate the IMEI of the device and use that as the Thing name. If you choose a different name, make sure to configure a custom client ID before building.
Accept the defaults and continue to the next step.
Select Auto-generate a new certificate to generate new certificates.
Select the policy that you created in a previous step.
Click on Create Thing.
Download the following certificates and keys for later use:
- Thing certificate (*-certificate.pem.crt)
- The private key (*.private.pem.key)
- The root CA (choose the Amazon Root CA 1, AmazonRootCA1.pem)
Click Done.

The certificates that you created or added for your Thing in AWS IoT must be stored on your device so that it can successfully connect to AWS IoT.

Provisioning of the certificates 

To provision the certificates and the private key to the nRF9160 modem, complete the following steps:

Download nRF Connect for Desktop.
Update the modem firmware on the onboard modem of the nRF9160-based device to the latest version by following the steps in Updating the modem firmware.
Build and program the nRF9160: AT Client sample to the nRF9160-based device as explained in Building and programming an application.
Launch the LTE Link Monitor application, which is part of nRF Connect for Desktop.
Click CERTIFICATE MANAGER located at the upper right corner.
Copy the server root certificate into the CA certificate entry.
Copy and paste the device certificate and the private key into the respective entries (Client certificate, Private key).
Select a desired security tag (any positive integer in the range of 0 to 2147483647) and click Update certificates.

Important

The default security tag set by the CERTIFICATE MANAGER 16842753 is reserved for communications with nRF Cloud. Overwriting this security tag entry will require you to flash new certificates if you want to establish a connection to the nRF Cloud.

Configuration 

Complete the following steps to set the required library options:

In the AWS IoT console, navigate to IoT core > Settings.
Find the Device data endpoint address and set CONFIG_AWS_IOT_BROKER_HOST_NAME to this address string.
Set the option CONFIG_AWS_IOT_CLIENT_ID_STATIC to the name of the Thing created earlier in the process. This is not needed if the application sets the client ID at run time. If you still want to set a custom client ID, make sure that the CONFIG_AWS_IOT_CLIENT_ID_APP is disabled and set the CONFIG_AWS_IOT_CLIENT_ID_STATIC option to your desired client ID.
Set the security tag configuration CONFIG_AWS_IOT_SEC_TAG to the security tag, chosen while you provisioned the certificates to the modem.

Optional library options 

To subscribe to the various AWS IoT Device Shadow Topics, set the following options:

Other options:

Note

If you are using a longer device ID that is either set by the option CONFIG_AWS_IOT_CLIENT_ID_STATIC or passed in during initialization, it might be required to increase the value of the option CONFIG_AWS_IOT_CLIENT_ID_MAX_LEN for proper initialization of the library.

Initializing the library 

The library is initialized by calling the aws_iot_init() function. If this API call fails, the application must not make any other API calls to the library.

Connecting to the AWS IoT message broker 

After the initialization, the aws_iot_connect() function must be called to connect to the AWS IoT broker. If this API call fails, the application must retry the connection by calling aws_iot_connect() again.

Note

The connection attempt can fail due to several reasons related to the network. Due to this its recommended to implement a routine that tries to reconnect the device upon a disconnect.

During an attempt to connect to the AWS IoT broker, the library tries to establish a connection using a TLS handshake, which usually spans a few seconds. When the library has established a connection and subscribed to all the configured and passed-in topics, it will propagate the AWS_IOT_EVT_READY event to signify that the library is ready to be used.

Subscribing to non-AWS specific topics 

To subscribe to non-AWS specific topics, complete the following steps:

Specify the number of additional topics that needs to be subscribed to, by setting the CONFIG_AWS_IOT_APP_SUBSCRIPTION_LIST_COUNT option.
Pass a list containing application specific topics in the aws_iot_subscription_topics_add() function, after the aws_iot_init() function call and before the aws_iot_connect() function call.

Setting client ID at run-time 

The AWS IoT library also supports passing in the client ID at run time. To enable this feature, set the client_id entry in the aws_iot_config structure that is passed in the aws_iot_init() function when initializing the library, and set the CONFIG_AWS_IOT_CLIENT_ID_APP Kconfig option.

AWS FOTA 

The library automatically includes and enables support for FOTA using the AWS FOTA library. To create a FOTA job, refer to the AWS FOTA documentation.

API documentation 

Header file: include/net/aws_iot.h

Source files: subsys/net/lib/aws_iot/src/

group aws_iot

Library to connect the device to the AWS IoT message broker.

Typedefs

typedef void (*aws_iot_evt_handler_t)(const struct aws_iot_evt *evt)

AWS IoT library asynchronous event handler.

Param evt: [in] The event and any associated parameters.

Enums

enum aws_iot_shadow_topic_type

AWS IoT shadow topics, used in messages to specify which shadow topic that will be published to.

Values:

enumerator AWS_IOT_SHADOW_TOPIC_NONE: Unused default value.

enumerator AWS_IOT_SHADOW_TOPIC_GET: This topic type corresponds to $aws/things/<thing-name>/shadow/get, publishing an empty message to this topic requests the device shadow document.

enumerator AWS_IOT_SHADOW_TOPIC_UPDATE: This topic type corresponds to $aws/things/<thing-name>/shadow/update, publishing data to this topic updates the device shadow document.

enumerator AWS_IOT_SHADOW_TOPIC_DELETE: This topic type corresponds to $aws/things/<thing-name>/shadow/delete, publishing an empty message to this topic deletes the device Shadow document.

enum aws_disconnect_result

@ AWS broker disconnect results.

Values:

enumerator AWS_IOT_DISCONNECT_USER_REQUEST

enumerator AWS_IOT_DISCONNECT_CLOSED_BY_REMOTE

enumerator AWS_IOT_DISCONNECT_INVALID_REQUEST

enumerator AWS_IOT_DISCONNECT_MISC

enumerator AWS_IOT_DISCONNECT_COUNT

enum aws_connect_result

AWS broker connect results.

Values:

enumerator AWS_IOT_CONNECT_RES_SUCCESS

enumerator AWS_IOT_CONNECT_RES_ERR_NOT_INITD

enumerator AWS_IOT_CONNECT_RES_ERR_INVALID_PARAM

enumerator AWS_IOT_CONNECT_RES_ERR_NETWORK

enumerator AWS_IOT_CONNECT_RES_ERR_BACKEND

enumerator AWS_IOT_CONNECT_RES_ERR_MISC

enumerator AWS_IOT_CONNECT_RES_ERR_NO_MEM

enumerator AWS_IOT_CONNECT_RES_ERR_PRV_KEY

enumerator AWS_IOT_CONNECT_RES_ERR_CERT

enumerator AWS_IOT_CONNECT_RES_ERR_CERT_MISC

enumerator AWS_IOT_CONNECT_RES_ERR_TIMEOUT_NO_DATA

enumerator AWS_IOT_CONNECT_RES_ERR_ALREADY_CONNECTED

enum aws_iot_evt_type

AWS IoT notification event types, used to signal the application.

Values:

enumerator AWS_IOT_EVT_CONNECTING: Connecting to AWS IoT broker.

enumerator AWS_IOT_EVT_CONNECTED: Connected to AWS IoT broker.

enumerator AWS_IOT_EVT_READY: AWS IoT library has subscribed to all configured topics.

enumerator AWS_IOT_EVT_DISCONNECTED: Disconnected to AWS IoT broker.

enumerator AWS_IOT_EVT_DATA_RECEIVED: Data received from AWS message broker.

enumerator AWS_IOT_EVT_PUBACK: Acknowledgment for data sent to AWS IoT.

enumerator AWS_IOT_EVT_PINGRESP: Acknowledgment for pings sent to AWS IoT.

enumerator AWS_IOT_EVT_FOTA_START: FOTA update start.

enumerator AWS_IOT_EVT_FOTA_DONE: FOTA update done, request to reboot.

enumerator AWS_IOT_EVT_FOTA_ERASE_PENDING: FOTA erase pending.

enumerator AWS_IOT_EVT_FOTA_ERASE_DONE: FOTA erase done.

enumerator AWS_IOT_EVT_FOTA_DL_PROGRESS: FOTA progress notification.

enumerator AWS_IOT_EVT_FOTA_ERROR: FOTA error. Used to propagate FOTA-related errors to the application. This is to distinguish between AWS_IOT irrecoverable errors and FOTA errors, so they can be handled differently.

enumerator AWS_IOT_EVT_ERROR: AWS IoT library irrecoverable error.

Functions

int aws_iot_init(const struct aws_iot_config *const config, aws_iot_evt_handler_t event_handler)

Initialize the module.

Note

This API must be called exactly once, and it must return successfully.

Parameters

config – [in] Pointer to struct containing connection parameters.
event_handler – [in] Pointer to event handler to receive AWS IoT module events.

Returns

0 If successful. Otherwise, a (negative) error code is returned.

int aws_iot_connect(struct aws_iot_config *const config)

Connect to the AWS IoT broker.

This function exposes the MQTT socket to main so that it can be polled on.

Parameters

config – [out] Pointer to struct containing connection parameters, the MQTT connection socket number will be copied to the socket entry of the struct.

Returns

0 If successful. Otherwise, a (negative) error code is returned.

int aws_iot_disconnect(void)

Disconnect from the AWS IoT broker.

Returns: 0 If successful. Otherwise, a (negative) error code is returned.

int aws_iot_send(const struct aws_iot_data *const tx_data)

Send data to AWS IoT broker.

Parameters

tx_data – [in] Pointer to struct containing data to be transmitted to the AWS IoT broker.

Returns

0 If successful. Otherwise, a (negative) error code is returned.

int aws_iot_input(void)

Get data from AWS IoT broker.

Returns: 0 If successful. Otherwise, a (negative) error code is returned.

int aws_iot_ping(void)

Ping AWS IoT broker. Must be called periodically to keep connection to broker alive.

Returns: 0 If successful. Otherwise, a (negative) error code is returned.

int aws_iot_subscription_topics_add(const struct aws_iot_topic_data *const topic_list, size_t list_count)

Add a list of application specific topics that will be subscribed to upon connection to AWS IoT broker.

Parameters

topic_list – [in] Pointer to list of topics.
list_count – [in] Number of entries in the list.

Returns

0 If successful. Otherwise, a (negative) error code is returned.

struct aws_iot_topic_data

#include <aws_iot.h>

AWS IoT topic data.

Public Members

enum aws_iot_shadow_topic_type type: Optional: type of shadow topic that will be published to. When publishing to a shadow topic this can be set instead of the application specific topic below.

const char *str: Pointer to string of application specific topic.

size_t len: Length of application specific topic.

struct aws_iot_app_topic_data

#include <aws_iot.h>

Structure used to declare a list of application specific topics passed in by the application.

Public Members

struct mqtt_topic list[CONFIG_AWS_IOT_APP_SUBSCRIPTION_LIST_COUNT]: List of application specific topics.

size_t list_count: Number of entries in topic list.

struct aws_iot_data

#include <aws_iot.h>

AWS IoT transmission data.

Public Members

struct aws_iot_topic_data topic: Topic data is sent/received on.

char *ptr: Pointer to data sent/received from the AWS IoT broker.

size_t len: Length of data.

enum mqtt_qos qos: Quality of Service of the message.

uint16_t message_id: Message id, used to match acknowledgments.

uint8_t dup_flag: Duplicate flag. 1 indicates the message is a retransmission, Usually triggered by missing publication acknowledgment.

uint8_t retain_flag: Retain flag. 1 indicates to AWS IoT that the message should be stored persistently.

struct aws_iot_evt

#include <aws_iot.h>

Struct with data received from AWS IoT broker.

Public Members

enum aws_iot_evt_type type: Type of event.

int fota_progress: FOTA progress in percentage.

struct aws_iot_config

#include <aws_iot.h>

Structure for AWS IoT broker connection parameters.

Public Members

int socket: Socket for AWS IoT broker connection

char *client_id: Client id for AWS IoT broker connection, used when CONFIG_AWS_IOT_CLIENT_ID_APP is set. If not set an internal configurable static client id is used.

size_t client_id_len: Length of client_id string.