Bluetooth: HCI RPMsg
Building and Running
This sample can be found under samples/bluetooth/hci_rpmsg in the Zephyr tree.
To use this application, you need a board with a Bluetooth controller and IPM drivers. You can then build this application and flash it onto your board in the usual way. See Supported Boards for board-specific building and programming information.
To test this sample, you need a separate device/CPU that acts as Bluetooth
HCI RPMsg peer.
This sample is compatible with the HCI RPMsg driver provided by
Zephyr’s Bluetooth HCI Drivers core. See the
CONFIG_BT_RPMSG configuration option for more information.
You might need to adjust the Kconfig configuration of this sample to make it
compatible with the peer application. For example,
must be equal to the maximum number of connections supported by the peer application.
Refer to Bluetooth samples for general information about Bluetooth samples.