Thread Group requires certification for devices using the Thread protocol. You can follow different scenarios to assure that your Nordic Semiconductor device based on nRF Connect SDK becomes a Thread-certified product.
For general information about the certification process, check the Thread Group’s certification information.
You can find the certification information for the chip that your are using in the Nordic Semiconductor Infocenter. Navigate to the compatibility matrix for your chip and select Thread CIDs.
Depending on your development approach, you have several certification options when using Nordic Semiconductor devices.
If you are developing a Thread product with nRF Connect SDK, you can apply for certifying this product by inheritance as an official Thread certified product. As long as you do not modify the functionality of the certified binary libraries, your product is eligible for certification by inheritance.
This scenario offers the most simplified and potentially the shortest certification process at the lowest cost. It is available to Thread Group members at Implementer tier or higher.
If your solution uses the same version of the OpenThread stack as the one used in the precompiled, certified binaries, but you made modifications within the operating parameters defined by Thread Group, you need to contact Thread Group to check if certification by inheritance is still possible.
You must officially list all changes with a detailed explanation in your application. Based on this list, Thread Group can accept or reject your application for certification by inheritance.
If your solution modifies the certified functionality of the stack, or if Thread Group rejects your application for certification by inheritance, you need to undergo the full certification procedure at an Authorized Test Lab (ATL). Only Contributor and Sponsor tier members of Thread Group can apply for certification by an ATL.
To certify a Thread product, all certification test cases must be run on the Thread Test Harness software.
A detailed description of how to assemble and configure a Thread Test Bed and run the Thread Test Harness can be found on the Thread Group’s Confluence wiki page.
The following procedure references the nRF52840 Development Kit. The same procedure can be used to run the certification using other development kits.
Complete the following steps to prepare for the certification tests:
Build the certification image.
The Thread: CLI sample is used as a base, modified with the
cd ncs/nrf/samples/openthread/cli/ west build -b nrf52840dk_nrf52840 -- -DOVERLAY_CONFIG=harness/overlay-cert.conf -DCONFIG_OPENTHREAD_LIBRARY_1_1=y
The configuration option selects the precompiled OpenThread libraries. The overlay file enables multiprotocol support with Bluetooth® LE advertising.
Prepare Thread Test Harness.
Copy the provided
Copy the provided
C:\GRL\Thread1.1\Web\data\deviceInputFields.xmland prepend the following code:
<DEVICE name="nRF Connect SDK" thumbnail="nRF_Connect_SDK.jpg" description = "Nordic Semiconductor: NCS Baudrate:115200" THCI="nRF_Connect_SDK"> <ITEM label="Serial Line" type="text" forParam="SerialPort" validation="COM" hint="eg: COM1">COM </ITEM> <ITEM label="Speed" type="text" forParam="SerialBaudRate" validation="baud-rate" hint="eg: 115200">115200 </ITEM> </DEVICE>
See the following links for more information on OpenThread:
Thread Test Harness does not correctly identify the nRF52840 DK (PCA10056) out-of-the-box.
Due to a collision of USB PID:VID with another vendor, Nordic devices are not automatically added to the device list. This is valid only for Nordic Semiconductor development kits with a J-Link virtual COM port.
To add an nRF52840 DK, drag the nRF52840 DK and drop it on the test bed configuration page. After that, the device is configured and the proper baud rate (115200) and COM port are set.