- Access Port Protection (APPROTECT)¶
A register used to prevent read and write access to all CPU registers and memory-mapped addresses.
- Anycast addressing¶
An addressing type that routes datagrams to a single member of a group of potential receivers that are all identified by the same destination address. This is a one-to-nearest association.
- API call return code¶
An indication of success or failure of an API call. In case of failure, a comprehensive error code indicating the cause or reason for the failure is provided.
An implementation example that includes a variety of libraries to implement a specific use case. It is possible to create a programmable image from it, as it includes a
- Application Programming Interface (API)¶
A language and message format used by an application program to communicate with an operating system, application, or other services.
- Attribute Protocol (ATT)¶
“[It] allows a device referred to as the server to expose a set of attributes and their associated values to a peer device referred to as the client.” Bluetooth Core Specification, Version 5.3, Vol 3, Part F, Section 1.1.
- Bluetooth® LE Controller layer¶
A layer of the Bluetooth LE protocol stack that implements the Link Layer (LL).
- Bluetooth® LE Host layer¶
A layer of the Bluetooth LE protocol stack comprised of multiple (non real-time) network and transport protocols enabling applications to communicate with peer devices in a standard and interoperable way.
In Zephyr and the nRF Connect SDK, a data structure for describing the hardware on the board, its configuration files, and the variant (secure or non-secure) of the build.
A line of development composed of a sequence of commits.
- Carrier Wave (CW)¶
A single-frequency electromagnetic wave that can be modulated in amplitude, frequency, or phase to convey information.
LTE-M User Equipment (UE) category with a single RX antenna, specified in 3GPP Release 13.
Narrowband Internet of Things (NB-IoT) User Equipment (UE) category with 200 kHz UE bandwidth and a single RX antenna, specified in 3GPP Release 13.
- Chain of Trust¶
A sequence of properties identifying the trustworthiness of each layer in the system, all the way back to a property in the system referred to as root of trust (RoT). A secure system depends on building and maintaining a chain of trust through all the layers in the system. Each step in this chain guarantees that the next step can be trusted to have certain properties because any unauthorized modification of a subsequent step will be detected and the process halted.
A local copy of a remote Git repository obtained using the command
In a thread mesh network, the process of authenticating and joining new devices to the network.
A snapshot of the history of each project file, taken at a specific moment in time. It is associated with a unique SHA and a message describing the edits it contains.
- Commit tag¶
A tag prepended to the first line of the commit message to ease filtering and identification of particular commit types.
A change to the codebase sent to a remote repository for inclusion.
- Cortex Microcontroller Software Interface Standard (CMSIS)¶
A vendor-independent hardware abstraction layer for the Cortex-M processor series that defines generic tool interfaces.
- Development Kit (DK)¶
A hardware development platform used for application development.
- Device Firmware Update (DFU)¶
A mechanism for upgrading the firmware of a device.
- Device Under Test (DUT)¶
A manufactured product undergoing testing.
A data structure for describing hardware and its boot-time configuration, including peripherals on a board, boot-time clock frequencies, and interrupt lines.
- Devicetree Specification (DTSpec)¶
A document that defines the source and binary representations of a devicetree, along with some common characteristics of the data structure, such as interrupts and memory addressing.
A set of software tools using OS-level virtualization to create and run applications and their dependencies in self-contained environments called containers.
- Docker container¶
A self-contained environment created by running a Docker container image in the Docker engine.
- Docker container image¶
A standard set of binary data that contains an application (or more than one) and all the required dependencies. When run on the Docker engine, it creates a Docker container.
- Docker engine¶
The container runtime that runs Docker images.
- Domain Name System (DNS)¶
A hierarchical distributed naming system for computers, services, or any resource connected to the Internet or a private network. It associates various information with domain names assigned to each of the participating entities. Most prominently, it translates domain names, which can be easily memorized by humans, to the numerical IP addresses needed for computer services and devices worldwide. The Domain Name System is an essential component of the functionality of most Internet services because it is the Internet’s primary directory service.
- Downstream fork¶
A repository located downstream, relative to another repository, in the flow of information. See Repository types.
- Firmware Over-the-Air (FOTA) update¶
A firmware update performed remotely over-the-air (OTA).
- Floating-Point Unit (FPU)¶
A part of a CPU specially designed to perform operations on floating-point numbers.
A server-hosted downstream copy of an upstream repository that intends to follow the changes made in the original upstream repository as time goes by, while at the same time keeping some other changes unique to it. It can be hosted on GitHub or elsewhere.
- General Packet Radio Services (GPRS)¶
Packet-based mobile data service for 2G and 3G mobile networks with data rates of 56-114 kbps/second and continuous connection to the Internet.
- General-Purpose Input/Output (GPIO)¶
A digital signal pin that can be used as input, output, or both. It is uncommitted and controllable by the user at runtime.
- General-Purpose Input/Output Tasks and Events (GPIOTE)¶
A module that provides functionality for accessing GPIO pins using tasks and events. Each GPIOTE channel can be assigned to one pin.
- Generic Access Profile (GAP)¶
A base profile that all Bluetooth devices implement. It defines the basic requirements of a Bluetooth device. See Bluetooth Core Specification, Version 5.3, Vol 1, Part A, Section 6.2.
- Generic Attribute Profile (GATT)¶
“Generic Attribute Profile (GATT) is built on top of the Attribute Protocol (ATT) and establishes common operations and a framework for the data transported and stored by the Attribute Protocol.” Bluetooth Core Specification, Version 5.3, Vol 1, Part A, Section 6.4.2.
- GitHub fork¶
A GitHub fork is a copy of a repository inside GitHub, that allows the user to create a Pull Request.
A satellite navigation system with global coverage. The system provides signals from space transmitting positioning and timing data to GNSS receivers, which use this data to determine location.
- Global Positioning System (GPS)¶
A satellite-based radio navigation system that provides its users with accurate location and time information over the globe.
- Host Controller Interface (HCI)¶
Standardized communication between the host stack and the controller (the Bluetooth IC). This standard allows the host stack or controller IC to be swapped with minimal adaptation.
- Human Interface Device (HID)¶
Type of a computer device that interacts directly with, and most often takes input from, humans and may deliver output to humans. The term “HID” most commonly refers to the USB-HID specification. This standard allows the host stack or controller IC to be swapped with minimal adaptation.
- Integrated Circuit (IC)¶
A semiconductor chip consisting of fabricated transistors, resistors, and capacitors.
- Integrated Development Environment (IDE)¶
A software application that provides facilities for software development.
- Internet Control Message Protocol (ICMP)¶
The control protocol of the IP stack that enables the establishment of reachability, routes, and so on. This protocol is an integral part of any IP but is unique as it is not a transport protocol to exchange data between hosts.
- Internet Protocol version 4 (IPv4)¶
The fourth version in the development of the Internet Protocol (IP). It is the communications protocol that provides an identification and location system for computers on networks. It routes most traffic on the Internet.
- Internet Protocol version 6 (IPv6)¶
The latest version of the Internet Protocol (IP). It is the communications protocol that provides an identification and location system for computers on networks and routes traffic across the Internet.
- IPv4 address¶
A numerical label that is used to identify a network interface of a computer or other network node participating in an IPv4 computer network.
- IPv6 address¶
An alphanumerical label that is used to identify a network interface of a computer or other network node participating in an IPv6 computer network.
- Kconfig file¶
A configuration file for a module or a sample, written in the Kconfig language syntax. It defines build-time configuration options, also called symbols, namely application-specific values for one or more kernel configuration options. It also defines how they are grouped into menus and sub-menus, and dependencies between them that determine what configurations are valid. Kconfig files use the
- Kconfig fragment¶
A configuration file used for building an application image with or without software support from specific Kconfig options. Examples include things like whether to add networking support or which drivers are needed by the application. Kconfig fragments use the
- Kconfig language¶
A configuration language used in Kconfig files and fragments. It was initially created for the Linux kernel.
- Kconfig option¶
A configuration option used in a Kconfig file or fragment.
- Kconfig project configuration¶
A Kconfig fragment, usually called
prj.conf, used to define default Kconfig options for an application. These are foundational options for the application that will always be applied to its built image. However, they can be overridden by applying an additional Kconfig fragment at build time.
- Lightweight Machine to Machine (LwM2M)¶
An application layer protocol. It defines the service architecture for IoT devices and the protocol for device management.
- Link Layer (LL)¶
“A control protocol for the link and physical layers that is carried over logical links in addition to user data.” Bluetooth Core Specification, Version 5.3, Vol 1, Part A, Section 1.2. It is implemented in the Bluetooth LE Controller layer.
- Logical Link Control and Adaptation Protocol (L2CAP)¶
“[It] provides a channel-based abstraction to applications and services. It carries out segmentation and reassembly of application data and multiplexing and de-multiplexing of multiple channels over a shared logical link.” Bluetooth Core Specification, Version 5.3, Vol 1, Part A, Section 1.1.
- Low Latency Packet Mode (LLPM)¶
A mode that allows shorter connection intervals than specified in the Bluetooth Core Specification.
- Low-Noise Amplifier (LNA)¶
In a radio receiving system, an electronic amplifier that amplifies a very low-power signal without significantly degrading its signal-to-noise ratio.
An open standard that is most suitable for medium-throughput applications requiring low power, low latency, and/or mobility, like asset tracking, wearables, medical, Point of Sale (POS), and home security applications. Also known as Cat-M1.
- Man-in-the-Middle (MITM)¶
A man-in-the-middle attack is a form of eavesdropping where communication between two devices is monitored and modified by an unauthorized party who relays information between the two devices giving the illusion that they are directly connected.
- Mass Storage Device (MSD)¶
Any storage device that makes it possible to store and port large amounts of data in a permanent and machine-readable fashion.
- Maximum Transmission Unit (MTU)¶
The largest packet or frame that can be sent in a single network-layer transaction.
A secure bootloader for 32-bit microcontroller units, which is independent of hardware and operating system.
A management library for 32-bit MCUs. It uses the Simple Management Protocol (SMP).
- Memory Watch Unit (MWU)¶
A peripheral that can be used to generate events when a memory region is accessed by the CPU.
A tool to view and edit Kconfig settings. It was initially created for the Linux kernel. It uses the Kconfig configuration language.
- Message Queue Telemetry Transport (MQTT)¶
A machine-to-machine (M2M) connectivity protocol used by some IoT devices. It is designed as an extremely lightweight publish/subscribe messaging transport. It is useful for connections with remote locations where a small code footprint is required and/or network bandwidth is at a premium. For example, it has been used in sensors communicating to a broker via satellite link, over occasional dial-up connections with healthcare providers, and in a range of home automation and small device scenarios.
- Microcontroller Unit (MCU)¶
A small computer on an integrated circuit.
- Multicast addressing¶
An addressing type that uses a one-to-many association, where datagrams are routed from a single sender to multiple selected endpoints simultaneously in a single transmission.
- Narrowband Internet of Things (NB-IoT)¶
A narrowband technology standard with longer range, lower throughput, and better penetration in, for example, cellars and parking garages compared to LTE-M. NB-IoT is most suitable for static, low throughput applications like smart metering, smart agriculture, and smart city applications. Also known as Cat-NB1.
- Near Field Communication (NFC)¶
A standards-based short-range wireless connectivity technology that enables two electronic devices to establish communication by bringing them close to each other.
- Network Co-Processor (NCP)¶
A co-processor offloading network functions from the host processor. In the nRF Connect SDK context, it is typically used in OpenThread and Zigbee platform designs.
- Network Time Protocol (NTP)¶
A networking protocol for clock synchronization between computer systems over packet-switched, variable-latency data networks.
- NFC-A Listen Mode¶
The initial mode of an NFC Forum Device when it does not generate a carrier. The device listens for the remote field of another device. See Near Field Communication (NFC).
- Noise Factor (NF)¶
The relation of the Signal-to-Noise Ratio (SNR) in the device input to the SNR in the device output.
- Non-volatile Memory Controller (NVMC)¶
A controller used for writing and erasing the internal flash memory and the User Information Configuration Registers (UICR).
- nRF Cloud¶
Nordic Semiconductor’s platform for connecting IoT devices to the cloud, viewing and analyzing device message data, prototyping ideas that use Nordic Semiconductor chips, and more. It includes a public REST API that can be used for building IoT solutions. See nRF Cloud.
- nRF repository¶
An nRF Connect SDK repository, hosted in the nrfconnect GitHub organization, that does not have an externally maintained, open-source upstream. It is exclusive to Nordic development.
- nRF Secure Immutable Bootloader (NSIB)¶
A bootloader created and maintained by Nordic Semiconductor that is built on Chain of Trust architecture.
A framework that provides software components that enable the development of software applications for Asymmetric Multiprocessing (AMP) systems. See OpenAMP.
A portable and flexible open-source implementation of the Thread networking protocol.
- OpenThread Border Router (OTBR)¶
A router that connects a Thread network to other IP-based networks, like Wi-Fi or Ethernet. A Thread network requires a Border Router to connect to other networks.
- Operating System (OS)¶
A set of functions and data structures that manages system resources, hardware components, and the execution of programs and processes. It is usually composed of a kernel, a scheduler, a file system, a memory manager, and other components.
- OSS repository¶
An nRF Connect SDK repository, hosted in the nrfconnect GitHub organization, that tracks an upstream Open Source Software counterpart that is externally maintained.
- Over-the-Air (OTA)¶
Any type of wireless transmission.
- Packet Traffic Arbitration (PTA)¶
A collaborative coexistence mechanism for colocated wireless protocols.
A method to describe changes in one or more source code files. It does not require a repository. Sometimes it is improperly used as a synonym of commit.
- Power Amplifier (PA)¶
A device used to increase the transmit power level of a radio signal.
- Power Saving Mode (PSM)¶
A feature introduced in 3GPP Release 12 to improve the battery life of IoT (Internet of Things) devices by minimizing energy consumption. The device stays dormant during the PSM window.
- Printed Circuit Board (PCB)¶
A board that connects electronic components.
- Programmable Peripheral Interconnect (PPI)¶
It enables peripherals to interact autonomously with each other using tasks and events independently of the CPU.
- Protocol Data Unit (PDU)¶
Information transferred as a single unit between peer entities of a computer network and containing control and address information or data. PDU mode is one of the two ways of sending and receiving SMS messages.
In a Thread Mesh network, the process of associating a device to the appropriate service, and performing any application or vendor-specific configuration. It is a step in the commissioning process.
In a Bluetooth Mesh network, the process of adding devices to the network.
In a bootloader, the process of storing public key hashes in a separate region of memory from the bootloader image.
- Pull Request¶
A set of commits that are sent to contribute to a repository.
- Qualified Design Identification (QDID)¶
A unique identifier assigned to a design that has completed the Bluetooth Qualification Process.
- Quality of Service (QoS)¶
The measured overall performance of a service, such as a network, a connection, or a cloud computing service.
- Radio Co-Processor (RCP)¶
A co-processor offloading radio functions from the host processor. In the nRF Connect SDK context, it is typically used in OpenThread and Zigbee platform designs.
- Real-time operating system (RTOS)¶
An operating system that reacts to input within a specific period of time. A real-time deadline can be so small that system reaction appears instantaneous.
- Real-Time Transfer (RTT)¶
Proprietary technology for bidirectional communication that supports J-Link devices and Arm-based microcontrollers, developed by SEGGER Microcontroller.
- Receive Data (RXD)¶
A signal line in a serial interface that receives data from another device.
The entire set of files and folders of which a project is composed, together with the revision history of each file. It is often composed of multiple branches. It is also known as Git repository or Git project.
- Root of Trust (RoT)¶
The property or component in a secure system that provides the foundation of a Chain of Trust.
An implementation example that showcases a single feature or library. It is possible to create a programmable image from it, as it includes a
- Secure Access Port Protection (SECUREAPPROTECT)¶
A register used to prevent read and write access to all secure CPU registers and secure memory-mapped addresses. See Access Port Protection (APPROTECT).
- Security Manager Protocol (SMP)¶
A protocol used for pairing and key distribution.
- SEGGER Embedded Studio (SES)¶
A cross-platform Integrated Development Environment (IDE) for embedded C/C++ programming with support for Nordic Semiconductor devices, produced by SEGGER Microcontroller. The nRF Connect SDK uses a custom Nordic Edition of SES.
- Signal-to-Noise Ratio (SNR)¶
The level of signal power compared to the level of noise power, often expressed in decibels (dB).
- Simple Management Procotol (SMP)¶
A transport protocol used by Mcumgr.
- Simple Network Time Protocol (SNTP)¶
A less complex implementation of NTP, using the same protocol but without requiring the storage of state over extended periods of time.
- Soft fork¶
A fork that contains a very small set of changes when compared to its upstream.
A wireless protocol stack that complements the nRF5 Series SoCs. Nordic Semiconductor provides these stacks as qualified, precompiled binary files.
- Software Development Kit (SDK)¶
A set of tools used for developing applications for a specific device or operating system.
A general management protocol for enabling a host device to communicate with and manage co-processors, like a network co-processor (NCP) or a radio co-processor (RCP).
- Supervisor Call (SVC)¶
It generates a software exception in which access to system resources or privileged operations can be provided.
- System in Package (SiP)¶
Several integrated circuits, often from different technologies, enclosed in a single module that performs as a system or subsystem.
- System on Chip (SoC)¶
A microchip that integrates all the necessary electronic circuits and components of a computer or other electronic systems on a single integrated circuit.
- System Protection Unit (SPU)¶
The central point in the system that controls access to memories, peripherals, and other resources. It is a peripheral used only by Nordic Semiconductor.
The goal of an operation, for example, programming a specific image on a device, compiling a specific set of files, or removing previously generated files.
A set of development tools. See GNU Arm Embedded Toolchain.
- Transmission Control Protocol (TCP)¶
A connection-oriented protocol that provides reliable transport. This reliability comes at the cost of control packets overhead of the protocol itself, making it unsuitable for bandwidth-constrained applications.
- Transmit Data (TXD)¶
A signal line in a serial interface that transmits data to another device.
- UART Hardware Flow Control (UART HWFC)¶
A handshaking mechanism used to prevent a buffer overflow in the receiver (in embedded computing use cases). In a serial connection, when the transmission baud rate is high enough for data to appear faster than it can be processed by the receiver, the communicating devices can synchronize with each other, using RTS (Require to Send) and CTS (Clear to Send) pins.
- Unicast addressing¶
An addressing type that uses a one-to-one association between the destination address and the network endpoint. Each destination address uniquely identifies a single receiver endpoint.
- Universal Asynchronous Receiver/Transmitter (UART)¶
A hardware device for asynchronous serial communication between devices.
- Universal Serial Bus (USB)¶
An industry standard that establishes specifications for cables and connectors and protocols for connection, communication, and power supply between computers, peripheral devices, and other computers.
In the nRF Connect SDK, the act of updating (synchronizing) a downstream repository with a newer revision of its upstream OSS repository.
- Upstream repository¶
A repository located upstream, relative to another repository, in the flow of information. See Repository types.
- User Datagram Protocol (UDP)¶
One of the core IP protocols. UDP with its connectionless model, no handshaking dialogues makes it a suitable transport for systems with constrained bandwidth like Bluetooth low energy.
- User Information Configuration Registers (UICR)¶
Non-volatile memory registers used to configure user-specific settings.
- Watchdog timer (WDT)¶
A timer that causes a system reset if it is not poked periodically.
A command-line tool providing a management system for multiple repositories, used by Zephyr and the nRF Connect SDK. It is expandable, as you can write your own extension commands to add additional features. See West (Zephyr’s meta-tool).
- West manifest file¶
The main file describing the contents of a west workspace, which is located in the manifest repository. In the nRF Connect SDK and Zephyr, it is named
- West manifest repository¶
A repository that contains a west manifest file and can be used to configure a west workspace. See Repository types.
- West project¶
Any of the listed repositories inside a west manifest file.