All Configuration Options¶

Kconfig files describe build-time configuration options (called symbols in Kconfig-speak), how they’re grouped into menus and sub-menus, and dependencies between them that determine what configurations are valid.

Kconfig files appear throughout the directory tree. For example, subsys/power/Kconfig defines power-related options.

This documentation is generated automatically from the Kconfig files by the gen_kconfig_rest.py script. Click on symbols for more information.

Configuration Options¶

Symbol name	Prompt
`CONFIG_2ND_LEVEL_INTERRUPTS`	Second-level interrupt support
`CONFIG_2ND_LVL_INTR_00_OFFSET`	Level 1 IRQ line for 2ND level aggregator 0
`CONFIG_2ND_LVL_INTR_01_OFFSET`	Level 1 IRQ line for 2ND level aggregator 1
`CONFIG_2ND_LVL_INTR_02_OFFSET`	Level 1 IRQ line for 2ND level aggregator 2
`CONFIG_2ND_LVL_INTR_03_OFFSET`	Level 1 IRQ line for 2ND level aggregator 3
`CONFIG_2ND_LVL_INTR_04_OFFSET`	Level 1 IRQ line for 2ND level aggregator 4
`CONFIG_2ND_LVL_INTR_05_OFFSET`	Level 1 IRQ line for 2ND level aggregator 5
`CONFIG_2ND_LVL_INTR_06_OFFSET`	Level 1 IRQ line for 2ND level aggregator 6
`CONFIG_2ND_LVL_INTR_07_OFFSET`	Level 1 IRQ line for 2ND level aggregator 7
`CONFIG_2ND_LVL_ISR_TBL_OFFSET`	Offset in _sw_isr_table for level 2 interrupts
`CONFIG_3RD_LEVEL_INTERRUPTS`	Third-level interrupt support
`CONFIG_3RD_LVL_INTR_00_OFFSET`	Level 2 IRQ line for 3RD level aggregator 0
`CONFIG_3RD_LVL_INTR_01_OFFSET`	Level 2 IRQ line for 3RD level aggregator 1
`CONFIG_3RD_LVL_INTR_02_OFFSET`	Level 2 IRQ line for 3RD level aggregator 2
`CONFIG_3RD_LVL_INTR_03_OFFSET`	Level 2 IRQ line for 3RD level aggregator 3
`CONFIG_3RD_LVL_INTR_04_OFFSET`	Level 2 IRQ line for 3RD level aggregator 4
`CONFIG_3RD_LVL_INTR_05_OFFSET`	Level 2 IRQ line for 3RD level aggregator 5
`CONFIG_3RD_LVL_INTR_06_OFFSET`	Level 2 IRQ line for 3RD level aggregator 6
`CONFIG_3RD_LVL_INTR_07_OFFSET`	Level 2 IRQ line for 3RD level aggregator 7
`CONFIG_3RD_LVL_ISR_TBL_OFFSET`	Offset in _sw_isr_table for level 3 interrupts
`CONFIG_64BIT`
`CONFIG_802154_RPMSG_BUILD_STRATEGY_FROM_SOURCE`	Build from source
`CONFIG_802154_RPMSG_BUILD_STRATEGY_SKIP_BUILD`	Skip building 802154_RPMSG
`CONFIG_AARCH64_IMAGE_HEADER`	Add image header
`CONFIG_ACPI`	ACPI (Advanced Configuration and Power Interface) support
`CONFIG_ADC`	ADC drivers
`CONFIG_ADC_ASYNC`	Enable asynchronous call support
`CONFIG_ADC_CC32XX`	CC32XX ADC driver
`CONFIG_ADC_CONFIGURABLE_INPUTS`
`CONFIG_ADC_EMUL`	ADC emulator
`CONFIG_ADC_EMUL_ACQUISITION_THREAD_PRIO`	Priority for the ADC data acquisition thread
`CONFIG_ADC_EMUL_ACQUISITION_THREAD_STACK_SIZE`	Stack size for the ADC data acquisition thread
`CONFIG_ADC_ITE_IT8XXX2`	ITE IT8XXX2 ADC driver
`CONFIG_ADC_LMP90XXX`	LMP90xxx driver
`CONFIG_ADC_LMP90XXX_ACQUISITION_THREAD_PRIO`	Priority for the ADC data acquisition thread
`CONFIG_ADC_LMP90XXX_ACQUISITION_THREAD_STACK_SIZE`	Stack size for the ADC data acquisition thread
`CONFIG_ADC_LMP90XXX_CRC`	Use Cyclic Redundancy Check (CRC)
`CONFIG_ADC_LMP90XXX_GPIO`	Enable GPIO support
`CONFIG_ADC_LMP90XXX_INIT_PRIORITY`	Init priority
`CONFIG_ADC_LOG_LEVEL`
`CONFIG_ADC_LOG_LEVEL_DBG`	Debug
`CONFIG_ADC_LOG_LEVEL_ERR`	Error
`CONFIG_ADC_LOG_LEVEL_INF`	Info
`CONFIG_ADC_LOG_LEVEL_OFF`	Off
`CONFIG_ADC_LOG_LEVEL_WRN`	Warning
`CONFIG_ADC_MCP320X`	MCP3204/MCP3208 driver
`CONFIG_ADC_MCP320X_ACQUISITION_THREAD_PRIO`	Priority for the ADC data acquisition thread
`CONFIG_ADC_MCP320X_ACQUISITION_THREAD_STACK_SIZE`	Stack size for the ADC data acquisition thread
`CONFIG_ADC_MCP320X_INIT_PRIORITY`	Init priority
`CONFIG_ADC_MCUX_ADC12`	MCUX ADC12 driver
`CONFIG_ADC_MCUX_ADC16`	MCUX ADC16 driver
`CONFIG_ADC_MCUX_ADC16_CLK_DIV_RATIO_1`	Divide ratio is 1
`CONFIG_ADC_MCUX_ADC16_CLK_DIV_RATIO_2`	Divide ratio is 2
`CONFIG_ADC_MCUX_ADC16_CLK_DIV_RATIO_4`	Divide ratio is 4
`CONFIG_ADC_MCUX_ADC16_CLK_DIV_RATIO_8`	Divide ratio is 8
`CONFIG_ADC_MCUX_ADC16_ENABLE_EDMA`	Enable EDMA for adc driver
`CONFIG_ADC_MCUX_ADC16_HW_TRIGGER`	ADC HW TRIGGER
`CONFIG_ADC_MCUX_ADC16_INIT_PRIORITY`	Init priority
`CONFIG_ADC_MCUX_ADC16_VREF_ALTERNATE`	Alternate reference pair
`CONFIG_ADC_MCUX_ADC16_VREF_DEFAULT`	Default voltage reference pair V_REFH and V_REFL
`CONFIG_ADC_MCUX_LPADC`	MCUX LPADC driver
`CONFIG_ADC_NPCX`	Nuvoton NPCX embedded controller (EC) ADC driver
`CONFIG_ADC_NRFX_ADC`	nRF ADC nrfx driver
`CONFIG_ADC_NRFX_ADC_CHANNEL_COUNT`	Number of ADC channels
`CONFIG_ADC_NRFX_SAADC`	nRF SAADC nrfx driver
`CONFIG_ADC_SAM0`	Atmel SAM0 series ADC Driver
`CONFIG_ADC_SAM_AFEC`	SAM ADC Driver
`CONFIG_ADC_SHELL`	Enable ADC Shell
`CONFIG_ADC_STM32`	STM32 ADC driver
`CONFIG_ADC_XEC`	Microchip XEC series ADC driver
`CONFIG_ADJUST_DCDC`	Adjust internal DCDC output
`CONFIG_ADJUST_LDO`	Adjust LDO setting
`CONFIG_ADP536X`	ADP536x
`CONFIG_ADP536X_BUS_NAME`	I2C bus name
`CONFIG_ADT7420`	ADT7420 Temperature Sensor
`CONFIG_ADT7420_TEMP_CRIT`	Critical overtemperature in °C
`CONFIG_ADT7420_TEMP_HYST`	Temperature hysteresis in °C
`CONFIG_ADT7420_THREAD_PRIORITY`	Thread priority
`CONFIG_ADT7420_THREAD_STACK_SIZE`	Thread stack size
`CONFIG_ADT7420_TRIGGER`
`CONFIG_ADT7420_TRIGGER_GLOBAL_THREAD`	Use global thread
`CONFIG_ADT7420_TRIGGER_NONE`	No trigger
`CONFIG_ADT7420_TRIGGER_OWN_THREAD`	Use own thread
`CONFIG_ADXL345`	ADXL345 Three Axis I2C accelerometer
`CONFIG_ADXL362`	ADXL362 sensor
`CONFIG_ADXL362_ABS_REF_MODE`	Absolute or referenced interrupt
`CONFIG_ADXL362_ACCEL_ODR_100`	100 Hz
`CONFIG_ADXL362_ACCEL_ODR_12_5`	12.5 Hz
`CONFIG_ADXL362_ACCEL_ODR_200`	200 Hz
`CONFIG_ADXL362_ACCEL_ODR_25`	25 Hz
`CONFIG_ADXL362_ACCEL_ODR_400`	400 Hz
`CONFIG_ADXL362_ACCEL_ODR_50`	50 Hz
`CONFIG_ADXL362_ACCEL_ODR_RUNTIME`	Set at runtime.
`CONFIG_ADXL362_ACCEL_RANGE_2G`	2G
`CONFIG_ADXL362_ACCEL_RANGE_4G`	4G
`CONFIG_ADXL362_ACCEL_RANGE_8G`	8G
`CONFIG_ADXL362_ACCEL_RANGE_RUNTIME`	Set at runtime.
`CONFIG_ADXL362_ACTIVITY_THRESHOLD`	Upper threshold value
`CONFIG_ADXL362_ACTIVITY_TIME`	Upper threshold time
`CONFIG_ADXL362_INACTIVITY_THRESHOLD`	Lower threshold value
`CONFIG_ADXL362_INACTIVITY_TIME`	Lower threshold time
`CONFIG_ADXL362_INTERRUPT_MODE`	Activity and inactivity interrupt mode
`CONFIG_ADXL362_THREAD_PRIORITY`	Thread priority
`CONFIG_ADXL362_THREAD_STACK_SIZE`	Thread stack size
`CONFIG_ADXL362_TRIGGER`
`CONFIG_ADXL362_TRIGGER_GLOBAL_THREAD`	Use global thread
`CONFIG_ADXL362_TRIGGER_NONE`	No trigger
`CONFIG_ADXL362_TRIGGER_OWN_THREAD`	Use own thread
`CONFIG_ADXL372`	ADXL372 Three Axis High-g I2C/SPI accelerometer
`CONFIG_ADXL372_ACTIVITY_THRESHOLD`	Activity threshold in mg
`CONFIG_ADXL372_ACTIVITY_TIME`	Activity time
`CONFIG_ADXL372_BW_1600HZ`	1600 Hz
`CONFIG_ADXL372_BW_200HZ`	200 Hz
`CONFIG_ADXL372_BW_3200HZ`	3200 Hz
`CONFIG_ADXL372_BW_400HZ`	400 Hz
`CONFIG_ADXL372_BW_800HZ`	800 Hz
`CONFIG_ADXL372_HPF_CORNER0`	ODR/210
`CONFIG_ADXL372_HPF_CORNER1`	ODR/411
`CONFIG_ADXL372_HPF_CORNER2`	ODR/812
`CONFIG_ADXL372_HPF_CORNER3`	ODR/1616
`CONFIG_ADXL372_HPF_DISABLE`	Disabled
`CONFIG_ADXL372_I2C`	I2C Interface
`CONFIG_ADXL372_INACTIVITY_THRESHOLD`	In-activity threshold in mg
`CONFIG_ADXL372_INACTIVITY_TIME`	In-activity time
`CONFIG_ADXL372_LPF_DISABLE`	Disabled
`CONFIG_ADXL372_MEASUREMENT_MODE`	Measurement Mode
`CONFIG_ADXL372_ODR_1600HZ`	1600 Hz
`CONFIG_ADXL372_ODR_3200HZ`	3200 Hz
`CONFIG_ADXL372_ODR_400HZ`	400 Hz
`CONFIG_ADXL372_ODR_6400HZ`	6400 Hz
`CONFIG_ADXL372_ODR_800HZ`	800 Hz
`CONFIG_ADXL372_PEAK_DETECT_MODE`	Max Peak detect mode
`CONFIG_ADXL372_REFERENCED_ACTIVITY_DETECTION_MODE`	Use referenced activity/in-activity detection
`CONFIG_ADXL372_SPI`	SPI Interface
`CONFIG_ADXL372_THREAD_PRIORITY`	Thread priority
`CONFIG_ADXL372_THREAD_STACK_SIZE`	Thread stack size
`CONFIG_ADXL372_TRIGGER`
`CONFIG_ADXL372_TRIGGER_GLOBAL_THREAD`	Use global thread
`CONFIG_ADXL372_TRIGGER_NONE`	No trigger
`CONFIG_ADXL372_TRIGGER_OWN_THREAD`	Use own thread
`CONFIG_AGPS`	A-GPS library
`CONFIG_AGPS_LOG_LEVEL`
`CONFIG_AGPS_LOG_LEVEL_DBG`	Debug
`CONFIG_AGPS_LOG_LEVEL_ERR`	Error
`CONFIG_AGPS_LOG_LEVEL_INF`	Info
`CONFIG_AGPS_LOG_LEVEL_OFF`	Off
`CONFIG_AGPS_LOG_LEVEL_WRN`	Warning
`CONFIG_AGPS_SRC_NRF_CLOUD`	Use nRF Cloud as data source
`CONFIG_AGPS_SRC_SUPL`	Use SUPL as data source
`CONFIG_AGPS_SUPL_HOST_NAME`	SUPL host name
`CONFIG_AGPS_SUPL_PORT`	SUPL port
`CONFIG_AHB_DIV`	AHB clock divider
`CONFIG_AK8975`	AK8975 Magnetometer
`CONFIG_ALTERA_AVALON_I2C`
`CONFIG_ALTERA_AVALON_MSGDMA`
`CONFIG_ALTERA_AVALON_QSPI`
`CONFIG_ALTERA_AVALON_SYSID`
`CONFIG_ALTERA_AVALON_TIMER`	Altera Avalon Interval Timer
`CONFIG_AMG88XX`	AMG88XX Infrared Thermopile Sensor
`CONFIG_AMG88XX_THREAD_PRIORITY`	Thread priority
`CONFIG_AMG88XX_THREAD_STACK_SIZE`	Thread stack size
`CONFIG_AMG88XX_TRIGGER`
`CONFIG_AMG88XX_TRIGGER_GLOBAL_THREAD`	Use global thread
`CONFIG_AMG88XX_TRIGGER_NONE`	No trigger
`CONFIG_AMG88XX_TRIGGER_OWN_THREAD`	Use own thread
`CONFIG_AMS_IAQ_CORE`	iAQ-core Digital VOC sensor
`CONFIG_APA102_STRIP`	APA102 SPI LED strip driver
`CONFIG_APDS9960`	APDS9960 Sensor
`CONFIG_APDS9960_AGAIN_16X`	16x
`CONFIG_APDS9960_AGAIN_1X`	1x
`CONFIG_APDS9960_AGAIN_4X`	4x
`CONFIG_APDS9960_AGAIN_64X`	64x
`CONFIG_APDS9960_ENABLE_ALS`	Enable Ambient Light Sense
`CONFIG_APDS9960_PGAIN_1X`	1x
`CONFIG_APDS9960_PGAIN_2X`	2x
`CONFIG_APDS9960_PGAIN_4X`	4x
`CONFIG_APDS9960_PGAIN_8X`	8x
`CONFIG_APDS9960_PLED_BOOST_100PCT`	100%
`CONFIG_APDS9960_PLED_BOOST_150PCT`	150%
`CONFIG_APDS9960_PLED_BOOST_200PCT`	200%
`CONFIG_APDS9960_PLED_BOOST_300PCT`	300%
`CONFIG_APDS9960_PPULSE_COUNT`	Proximity Pulse Count
`CONFIG_APDS9960_PPULSE_LENGTH_16US`	16us
`CONFIG_APDS9960_PPULSE_LENGTH_32US`	32us
`CONFIG_APDS9960_PPULSE_LENGTH_4US`	4us
`CONFIG_APDS9960_PPULSE_LENGTH_8US`	8us
`CONFIG_APDS9960_TRIGGER`
`CONFIG_APDS9960_TRIGGER_GLOBAL_THREAD`	Use global thread
`CONFIG_APDS9960_TRIGGER_NONE`	No trigger
`CONFIG_APIC_TIMER`	New local APIC timer
`CONFIG_APIC_TIMER_IRQ`	Local APIC timer IRQ
`CONFIG_APIC_TIMER_IRQ_PRIORITY`	Local APIC timer interrupt priority
`CONFIG_APIC_TIMER_TSC`	Use invariant TSC for sys_clock_cycle_get_32()
`CONFIG_APIC_TIMER_TSC_M`	TSC to local APIC timer frequency divisor (M)
`CONFIG_APIC_TIMER_TSC_N`	TSC to local APIC timer frequency multiplier (N)
`CONFIG_APIC_TSC_DEADLINE_TIMER`	Even newer APIC timer using TSC deadline mode
`CONFIG_APPLICATION_DEFINED_SYSCALL`	Scan application folder for any syscall definition
`CONFIG_APPLICATION_INIT_PRIORITY`	Default init priority for application level drivers
`CONFIG_APP_LINK_WITH_ALEXA_GADGETS_PROTO`	Link ‘app’ with Alexa Gadgets Proto headers
`CONFIG_APP_LINK_WITH_CHIP`	Link ‘app’ with Connected Home over IP
`CONFIG_APP_LINK_WITH_CURL`	Link ‘app’ with CURL
`CONFIG_APP_LINK_WITH_EDGE_IMPULSE`	Link ‘app’ with Edge Impulse
`CONFIG_APP_LINK_WITH_FS`	Link ‘app’ with FS
`CONFIG_APP_LINK_WITH_IPERF3`	Link ‘app’ with IPERF3
`CONFIG_APP_LINK_WITH_LVGL`	Link ‘app’ with LVGL
`CONFIG_APP_LINK_WITH_MBEDTLS`	Link ‘app’ with MBEDTLS
`CONFIG_APP_LINK_WITH_MBEDTLS_INCLUDES`
`CONFIG_APP_LINK_WITH_MCUMGR`	Link ‘app’ with MCUMGR
`CONFIG_APP_LINK_WITH_PELION_CLIENT`	Link application with Pelion client
`CONFIG_APP_LINK_WITH_POSIX_SUBSYS`	Make POSIX headers available to application
`CONFIG_APP_LINK_WITH_ZBOSS`
`CONFIG_APP_LINK_WITH_ZIGBEE`
`CONFIG_ARC`
`CONFIG_ARCH`
`CONFIG_ARCH_HAS_COHERENCE`
`CONFIG_ARCH_HAS_CUSTOM_BUSY_WAIT`
`CONFIG_ARCH_HAS_CUSTOM_SWAP_TO_MAIN`
`CONFIG_ARCH_HAS_DEMAND_PAGING`
`CONFIG_ARCH_HAS_EXECUTABLE_PAGE_BIT`
`CONFIG_ARCH_HAS_EXTRA_EXCEPTION_INFO`
`CONFIG_ARCH_HAS_GDBSTUB`
`CONFIG_ARCH_HAS_NESTED_EXCEPTION_DETECTION`
`CONFIG_ARCH_HAS_NOCACHE_MEMORY_SUPPORT`
`CONFIG_ARCH_HAS_RAMFUNC_SUPPORT`
`CONFIG_ARCH_HAS_RESERVED_PAGE_FRAMES`
`CONFIG_ARCH_HAS_SINGLE_THREAD_SUPPORT`
`CONFIG_ARCH_HAS_STACK_PROTECTION`
`CONFIG_ARCH_HAS_THREAD_ABORT`
`CONFIG_ARCH_HAS_THREAD_LOCAL_STORAGE`
`CONFIG_ARCH_HAS_TIMING_FUNCTIONS`
`CONFIG_ARCH_HAS_TRUSTED_EXECUTION`
`CONFIG_ARCH_HAS_USERSPACE`
`CONFIG_ARCH_IS_SET`
`CONFIG_ARCH_LOG_LEVEL`
`CONFIG_ARCH_LOG_LEVEL_DBG`	Debug
`CONFIG_ARCH_LOG_LEVEL_ERR`	Error
`CONFIG_ARCH_LOG_LEVEL_INF`	Info
`CONFIG_ARCH_LOG_LEVEL_OFF`	Off
`CONFIG_ARCH_LOG_LEVEL_WRN`	Warning
`CONFIG_ARCH_MAPS_ALL_RAM`
`CONFIG_ARCH_MEM_DOMAIN_DATA`
`CONFIG_ARCH_MEM_DOMAIN_SYNCHRONOUS_API`
`CONFIG_ARCH_POSIX`
`CONFIG_ARCH_POSIX_RECOMMENDED_STACK_SIZE`
`CONFIG_ARCH_SUPPORTS_ARCH_HW_INIT`
`CONFIG_ARCH_SUPPORTS_COREDUMP`
`CONFIG_ARCH_SW_ISR_TABLE_ALIGN`	Alignment size of a software ISR table
`CONFIG_ARCV2_INTERRUPT_UNIT`	ARCv2 Interrupt Unit
`CONFIG_ARCV2_TIMER`	ARC Timer
`CONFIG_ARCV2_TIMER_IRQ_PRIORITY`	ARC timer interrupt priority
`CONFIG_ARC_CONNECT`	ARC has ARC connect
`CONFIG_ARC_CORE_MPU`	ARC Core MPU functionalities
`CONFIG_ARC_EXCEPTION_DEBUG`	Unhandled exception debugging information
`CONFIG_ARC_EXCEPTION_STACK_SIZE`	ARC exception handling stack size
`CONFIG_ARC_FIRQ`	FIRQ enable
`CONFIG_ARC_FIRQ_STACK`	Enable separate firq stack
`CONFIG_ARC_FIRQ_STACK_SIZE`	FIRQ stack size
`CONFIG_ARC_HAS_ACCL_REGS`	Reg Pair ACCL:ACCH (FPU and/or MPY > 6)
`CONFIG_ARC_HAS_SECURE`	ARC has SecureShield
`CONFIG_ARC_HAS_STACK_CHECKING`	ARC has STACK_CHECKING
`CONFIG_ARC_HAS_ZOL`
`CONFIG_ARC_MPU`	ARC MPU Support
`CONFIG_ARC_MPU_ENABLE`	Enable MPU
`CONFIG_ARC_MPU_VER`	ARC MPU version
`CONFIG_ARC_NORMAL_FIRMWARE`	Generate Normal Firmware
`CONFIG_ARC_SECURE_FIRMWARE`	Generate Secure Firmware
`CONFIG_ARC_STACK_CHECKING`
`CONFIG_ARC_STACK_PROTECTION`
`CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS`	Enable unaligned access in HW
`CONFIG_ARM`
`CONFIG_ARM64`
`CONFIG_ARM64_PA_BITS`
`CONFIG_ARM64_PA_BITS_32`	32-bit
`CONFIG_ARM64_PA_BITS_36`	36-bit
`CONFIG_ARM64_PA_BITS_40`	40-bit
`CONFIG_ARM64_PA_BITS_42`	42-bit
`CONFIG_ARM64_PA_BITS_48`	48-bit
`CONFIG_ARM64_VA_BITS`
`CONFIG_ARM64_VA_BITS_32`	32-bit
`CONFIG_ARM64_VA_BITS_36`	36-bit
`CONFIG_ARM64_VA_BITS_40`	40-bit
`CONFIG_ARM64_VA_BITS_42`	42-bit
`CONFIG_ARM64_VA_BITS_48`	48-bit
`CONFIG_ARMV6_M_ARMV8_M_BASELINE`
`CONFIG_ARMV7_EXCEPTION_STACK_SIZE`	Undefined Instruction and Abort stack size (in bytes)
`CONFIG_ARMV7_FIQ_STACK_SIZE`	FIQ stack size (in bytes)
`CONFIG_ARMV7_M_ARMV8_M_FP`
`CONFIG_ARMV7_M_ARMV8_M_MAINLINE`
`CONFIG_ARMV7_R`
`CONFIG_ARMV7_R_FP`
`CONFIG_ARMV7_SVC_STACK_SIZE`	SVC stack size (in bytes)
`CONFIG_ARMV7_SYS_STACK_SIZE`	SYS stack size (in bytes)
`CONFIG_ARMV8_1_M_MAINLINE`
`CONFIG_ARMV8_A`
`CONFIG_ARMV8_A_NS`	ARMv8-A Normal World (Non-Secure world of Trustzone)
`CONFIG_ARMV8_M_BASELINE`
`CONFIG_ARMV8_M_DSP`
`CONFIG_ARMV8_M_MAINLINE`
`CONFIG_ARMV8_M_SE`
`CONFIG_ARMV8_R`
`CONFIG_ARM_ARCH_TIMER`	ARM architected timer
`CONFIG_ARM_CLOCK_CONTROL_DEV_NAME`	Clock Config Device name
`CONFIG_ARM_CUSTOM_INTERRUPT_CONTROLLER`
`CONFIG_ARM_DIV`	ARM clock divider
`CONFIG_ARM_ENTRY_VENEERS_LIB_NAME`	Entry Veneers symbol file
`CONFIG_ARM_FIRMWARE_HAS_SECURE_ENTRY_FUNCS`	Secure Firmware has Secure Entry functions
`CONFIG_ARM_FIRMWARE_USES_SECURE_ENTRY_FUNCS`	Non-Secure Firmware uses Secure Entry functions
`CONFIG_ARM_MMU`	ARM MMU Support
`CONFIG_ARM_MPU`	ARM MPU Support
`CONFIG_ARM_MPU_REGION_MIN_ALIGN_AND_SIZE`
`CONFIG_ARM_NONSECURE_FIRMWARE`
`CONFIG_ARM_NONSECURE_PREEMPTIBLE_SECURE_CALLS`	Allow secure function calls to be preempted
`CONFIG_ARM_NSC_REGION_BASE_ADDRESS`	ARM Non-Secure Callable Region base address
`CONFIG_ARM_SECURE_BUSFAULT_HARDFAULT_NMI`	BusFault, HardFault, and NMI target Secure state
`CONFIG_ARM_SECURE_FIRMWARE`
`CONFIG_ARM_STACK_PROTECTION`
`CONFIG_ARM_STORE_EXC_RETURN`
`CONFIG_ARM_TRUSTZONE_M`	ARM TrustZone-M support
`CONFIG_ASAN`	Build with address sanitizer
`CONFIG_ASAN_NOP_DLCLOSE`	Override host OS dlclose() with a NOP
`CONFIG_ASF`
`CONFIG_ASSEMBLER_ISA_THUMB2`
`CONFIG_ASSERT`	Enable __ASSERT() macro
`CONFIG_ASSERT_LEVEL`	__ASSERT() level
`CONFIG_ASSERT_NO_COND_INFO`	Disable condition info for asserts
`CONFIG_ASSERT_NO_FILE_INFO`	Disable file info for asserts
`CONFIG_ASSERT_NO_MSG_INFO`	Disable message for asserts
`CONFIG_ASSERT_ON_ERRORS`	Assert on all errors
`CONFIG_ASSERT_VERBOSE`	Enable verbose assertions
`CONFIG_ATMEL_WINC1500`
`CONFIG_ATOMIC_OPERATIONS_ARCH`
`CONFIG_ATOMIC_OPERATIONS_BUILTIN`
`CONFIG_ATOMIC_OPERATIONS_C`
`CONFIG_AT_CMD`	AT Command driver
`CONFIG_AT_CMD_INIT_PRIORITY`	AT Command driver init priority
`CONFIG_AT_CMD_LOG_LEVEL`
`CONFIG_AT_CMD_LOG_LEVEL_DBG`	Debug
`CONFIG_AT_CMD_LOG_LEVEL_ERR`	Error
`CONFIG_AT_CMD_LOG_LEVEL_INF`	Info
`CONFIG_AT_CMD_LOG_LEVEL_OFF`	Off
`CONFIG_AT_CMD_LOG_LEVEL_WRN`	Warning
`CONFIG_AT_CMD_PARSER`	AT command parser library
`CONFIG_AT_CMD_QUEUE_LEN`	Maximum number of queued AT commands
`CONFIG_AT_CMD_RESPONSE_MAX_LEN`	Maximum AT command response length
`CONFIG_AT_CMD_SYS_INIT`	Initialize the AT Command driver during system init
`CONFIG_AT_CMD_THREAD_PRIO`	AT thread priority level
`CONFIG_AT_CMD_THREAD_STACK_SIZE`	AT thread stack size
`CONFIG_AT_HOST_CMD_MAX_LEN`	Maximum AT command length
`CONFIG_AT_HOST_LIBRARY`	AT Host Library for nrf91
`CONFIG_AT_HOST_LOG_LEVEL`
`CONFIG_AT_HOST_LOG_LEVEL_DBG`	Debug
`CONFIG_AT_HOST_LOG_LEVEL_ERR`	Error
`CONFIG_AT_HOST_LOG_LEVEL_INF`	Info
`CONFIG_AT_HOST_LOG_LEVEL_OFF`	Off
`CONFIG_AT_HOST_LOG_LEVEL_WRN`	Warning
`CONFIG_AT_HOST_TERMINATION`
`CONFIG_AT_HOST_THREAD_PRIO`	AT host workqueue thread priority level
`CONFIG_AT_HOST_UART`
`CONFIG_AT_HOST_UART_0`	UART 0
`CONFIG_AT_HOST_UART_1`	UART 1
`CONFIG_AT_HOST_UART_2`	UART 2
`CONFIG_AT_HOST_UART_INIT_TIMEOUT`	Timeout waiting for a valid UART line on init (ms)
`CONFIG_AT_MONITOR`	AT notification monitor
`CONFIG_AT_MONITOR_HEAP_SIZE`	Heap size for notifications
`CONFIG_AT_MONITOR_LOG_LEVEL`
`CONFIG_AT_MONITOR_LOG_LEVEL_DBG`	Debug
`CONFIG_AT_MONITOR_LOG_LEVEL_ERR`	Error
`CONFIG_AT_MONITOR_LOG_LEVEL_INF`	Info
`CONFIG_AT_MONITOR_LOG_LEVEL_OFF`	Off
`CONFIG_AT_MONITOR_LOG_LEVEL_WRN`	Warning
`CONFIG_AT_MONITOR_SYS_INIT`	Initialize during SYS_INIT
`CONFIG_AT_NOTIF`	AT-command notification manager
`CONFIG_AT_NOTIF_LOG_LEVEL`
`CONFIG_AT_NOTIF_LOG_LEVEL_DBG`	Debug
`CONFIG_AT_NOTIF_LOG_LEVEL_ERR`	Error
`CONFIG_AT_NOTIF_LOG_LEVEL_INF`	Info
`CONFIG_AT_NOTIF_LOG_LEVEL_OFF`	Off
`CONFIG_AT_NOTIF_LOG_LEVEL_WRN`	Warning
`CONFIG_AT_NOTIF_SYS_INIT`	Initialize the AT-command notification manager during system init
`CONFIG_AUDIO`	Support for Audio
`CONFIG_AUDIO_CODEC`	Audio Codec Drivers
`CONFIG_AUDIO_CODEC_INIT_PRIORITY`	Init priority
`CONFIG_AUDIO_CODEC_LOG_LEVEL`
`CONFIG_AUDIO_CODEC_LOG_LEVEL_DBG`	Debug
`CONFIG_AUDIO_CODEC_LOG_LEVEL_ERR`	Error
`CONFIG_AUDIO_CODEC_LOG_LEVEL_INF`	Info
`CONFIG_AUDIO_CODEC_LOG_LEVEL_OFF`	Off
`CONFIG_AUDIO_CODEC_LOG_LEVEL_WRN`	Warning
`CONFIG_AUDIO_DMIC`	Digital Microphone (Audio) Drivers
`CONFIG_AUDIO_DMIC_INIT_PRIORITY`	Init priority
`CONFIG_AUDIO_DMIC_LOG_LEVEL`
`CONFIG_AUDIO_DMIC_LOG_LEVEL_DBG`	Debug
`CONFIG_AUDIO_DMIC_LOG_LEVEL_ERR`	Error
`CONFIG_AUDIO_DMIC_LOG_LEVEL_INF`	Info
`CONFIG_AUDIO_DMIC_LOG_LEVEL_OFF`	Off
`CONFIG_AUDIO_DMIC_LOG_LEVEL_WRN`	Warning
`CONFIG_AUDIO_INTEL_DMIC`	Intel digital PDM microphone driver support
`CONFIG_AUDIO_MPXXDTYY`	ST Digital PDM microphone attached to I2S support
`CONFIG_AUDIO_TLV320DAC`	TLV320DAC310x DAC support
`CONFIG_AWS_FOTA`	AWS Jobs FOTA library
`CONFIG_AWS_FOTA_DOWNLOAD_SECURITY_TAG`	Security tag to be used for downloads
`CONFIG_AWS_FOTA_FILE_PATH_MAX_LEN`	File path buffer size
`CONFIG_AWS_FOTA_HOSTNAME_MAX_LEN`	Hostname buffer size
`CONFIG_AWS_FOTA_LOG_LEVEL`
`CONFIG_AWS_FOTA_LOG_LEVEL_DBG`	Debug
`CONFIG_AWS_FOTA_LOG_LEVEL_ERR`	Error
`CONFIG_AWS_FOTA_LOG_LEVEL_INF`	Info
`CONFIG_AWS_FOTA_LOG_LEVEL_OFF`	Off
`CONFIG_AWS_FOTA_LOG_LEVEL_WRN`	Warning
`CONFIG_AWS_FOTA_PAYLOAD_SIZE`	MQTT payload reception buffer size for AWS IoT Jobs messages
`CONFIG_AWS_IOT`	AWS IoT library
`CONFIG_AWS_IOT_APP_SUBSCRIPTION_LIST_COUNT`	Amount of entries in the application subscription list
`CONFIG_AWS_IOT_AUTO_DEVICE_SHADOW_REQUEST`	Request the device shadow automatically upon a connection to AWS
`CONFIG_AWS_IOT_BROKER_HOST_NAME`	AWS IoT server hostname
`CONFIG_AWS_IOT_CLIENT_ID_APP`	Client ID provided by application run-time
`CONFIG_AWS_IOT_CLIENT_ID_MAX_LEN`	Maximum length of cliend id
`CONFIG_AWS_IOT_CLIENT_ID_STATIC`	Static client id
`CONFIG_AWS_IOT_CONNECTION_POLL_THREAD`	Enable polling on MQTT socket in AWS IoT backend
`CONFIG_AWS_IOT_IPV6`	Configure AWS IoT library to use IPv6 addressing. Otherwise IPv4 is used.
`CONFIG_AWS_IOT_LAST_WILL`	This option includes the last will message and topic in the initial MQTT handshake
`CONFIG_AWS_IOT_LAST_WILL_MESSAGE`	Message published to the last will topic
`CONFIG_AWS_IOT_LAST_WILL_TOPIC`	Topic that the last will message is published to
`CONFIG_AWS_IOT_LOG_LEVEL`
`CONFIG_AWS_IOT_LOG_LEVEL_DBG`	Debug
`CONFIG_AWS_IOT_LOG_LEVEL_ERR`	Error
`CONFIG_AWS_IOT_LOG_LEVEL_INF`	Info
`CONFIG_AWS_IOT_LOG_LEVEL_OFF`	Off
`CONFIG_AWS_IOT_LOG_LEVEL_WRN`	Warning
`CONFIG_AWS_IOT_MQTT_PAYLOAD_BUFFER_LEN`	Size of the MQTT PUBLISH payload buffer (receiving MQTT messages).
`CONFIG_AWS_IOT_MQTT_RX_TX_BUFFER_LEN`	Buffer sizes for the MQTT library.
`CONFIG_AWS_IOT_PORT`	AWS server port
`CONFIG_AWS_IOT_SEC_TAG`	Security tag to use for AWS IoT connection
`CONFIG_AWS_IOT_SEND_TIMEOUT`	Send data with socket timeout
`CONFIG_AWS_IOT_SEND_TIMEOUT_SEC`	Send timeout
`CONFIG_AWS_IOT_STATIC_IPV4`	Enable use of static IPv4
`CONFIG_AWS_IOT_STATIC_IPV4_ADDR`	Static IPv4 address
`CONFIG_AWS_IOT_TOPIC_DELETE_ACCEPTED_SUBSCRIBE`	Subscribe to delete accepted shadow topic, $aws/things/<thing-name>/shadow/delete/accepted
`CONFIG_AWS_IOT_TOPIC_DELETE_REJECTED_SUBSCRIBE`	Subscribe to delete rejected shadow topic, $aws/things/<thing-name>/shadow/delete/rejected
`CONFIG_AWS_IOT_TOPIC_GET_ACCEPTED_SUBSCRIBE`	Subscribe to get accepted shadow topic, $aws/things/<thing-name>/shadow/get/accepted
`CONFIG_AWS_IOT_TOPIC_GET_REJECTED_SUBSCRIBE`	Subscribe to get rejected shadow topic, $aws/things/<thing-name>/shadow/get/rejected
`CONFIG_AWS_IOT_TOPIC_UPDATE_ACCEPTED_SUBSCRIBE`	Subscribe to update accepted shadow topic, $aws/things/<thing-name>/shadow/update/accepted
`CONFIG_AWS_IOT_TOPIC_UPDATE_DELTA_SUBSCRIBE`	Subscribe to update delta shadow topic, $aws/things/<thing-name>/shadow/update/delta
`CONFIG_AWS_IOT_TOPIC_UPDATE_REJECTED_SUBSCRIBE`	Subscribe to update rejected shadow topic, $aws/things/<thing-name>/shadow/update/rejected
`CONFIG_AWS_JOBS`	AWS Jobs library
`CONFIG_AWS_JOBS_LOG_LEVEL`
`CONFIG_AWS_JOBS_LOG_LEVEL_DBG`	Debug
`CONFIG_AWS_JOBS_LOG_LEVEL_ERR`	Error
`CONFIG_AWS_JOBS_LOG_LEVEL_INF`	Info
`CONFIG_AWS_JOBS_LOG_LEVEL_OFF`	Off
`CONFIG_AWS_JOBS_LOG_LEVEL_WRN`	Warning
`CONFIG_AZURE_FOTA`	Azure FOTA library [EXPERIMENTAL]
`CONFIG_AZURE_FOTA_APP_VERSION`	Application version
`CONFIG_AZURE_FOTA_APP_VERSION_AUTO`	Automatically create application version
`CONFIG_AZURE_FOTA_DOWNLOAD_PORT`	Port number
`CONFIG_AZURE_FOTA_FILE_PATH_MAX_LEN`	File path buffer size
`CONFIG_AZURE_FOTA_HOSTNAME_MAX_LEN`	Hostname buffer size
`CONFIG_AZURE_FOTA_JOB_ID_MAX_LEN`	Job ID string buffer size
`CONFIG_AZURE_FOTA_LOG_LEVEL`
`CONFIG_AZURE_FOTA_LOG_LEVEL_DBG`	Debug
`CONFIG_AZURE_FOTA_LOG_LEVEL_ERR`	Error
`CONFIG_AZURE_FOTA_LOG_LEVEL_INF`	Info
`CONFIG_AZURE_FOTA_LOG_LEVEL_OFF`	Off
`CONFIG_AZURE_FOTA_LOG_LEVEL_WRN`	Warning
`CONFIG_AZURE_FOTA_SEC_TAG`	TLS sec tag
`CONFIG_AZURE_FOTA_TLS`	Use HTTPS for downloads
`CONFIG_AZURE_FOTA_VERSION_MAX_LEN`	Version string buffer size
`CONFIG_AZURE_IOT_HUB`	Azure IoT Hub [EXPERIMENTAL]
`CONFIG_AZURE_IOT_HUB_AUTO_DEVICE_TWIN_REQUEST`	Request device twin automatically when connected
`CONFIG_AZURE_IOT_HUB_DEVICE_ID`	Device ID
`CONFIG_AZURE_IOT_HUB_DEVICE_ID_APP`	Provide device ID run-time
`CONFIG_AZURE_IOT_HUB_DEVICE_ID_MAX_LEN`	Maximum length of device ID
`CONFIG_AZURE_IOT_HUB_DPS`	Use Device Provisioning Service
`CONFIG_AZURE_IOT_HUB_DPS_HOSTNAME`	DPS host name
`CONFIG_AZURE_IOT_HUB_DPS_ID_SCOPE`	DPS ID scope
`CONFIG_AZURE_IOT_HUB_HOSTNAME`	Azure IoT Hub hostname
`CONFIG_AZURE_IOT_HUB_HOSTNAME_MAX_LEN`	Max length for Azure IoT Hub name
`CONFIG_AZURE_IOT_HUB_LOG_LEVEL`
`CONFIG_AZURE_IOT_HUB_LOG_LEVEL_DBG`	Debug
`CONFIG_AZURE_IOT_HUB_LOG_LEVEL_ERR`	Error
`CONFIG_AZURE_IOT_HUB_LOG_LEVEL_INF`	Info
`CONFIG_AZURE_IOT_HUB_LOG_LEVEL_OFF`	Off
`CONFIG_AZURE_IOT_HUB_LOG_LEVEL_WRN`	Warning
`CONFIG_AZURE_IOT_HUB_MQTT_PAYLOAD_BUFFER_LEN`	Size of the MQTT PUBLISH payload buffer (receiving MQTT messages).
`CONFIG_AZURE_IOT_HUB_MQTT_RX_TX_BUFFER_LEN`	Buffer sizes for the MQTT library
`CONFIG_AZURE_IOT_HUB_PORT`	Azure IoT Hub port
`CONFIG_AZURE_IOT_HUB_PROPERTY_BAG_MAX_COUNT`	Maximum number of property bag elements
`CONFIG_AZURE_IOT_HUB_SEC_TAG`	TLS sec tag
`CONFIG_AZURE_IOT_HUB_SEND_TIMEOUT`	Send data with socket timeout
`CONFIG_AZURE_IOT_HUB_SEND_TIMEOUT_SEC`	Send timeout
`CONFIG_AZURE_IOT_HUB_STACK_SIZE`	Connection thread stack size
`CONFIG_AZURE_IOT_HUB_STATIC_IPV4`	Enable use of static IPv4
`CONFIG_AZURE_IOT_HUB_STATIC_IPV4_ADDR`	Static IPv4 address
`CONFIG_AZURE_IOT_HUB_TOPIC_ELEMENT_MAX_LEN`	Maximum length of topic element strings
`CONFIG_AZURE_IOT_HUB_TOPIC_MAX_LEN`	Max length of topic
`CONFIG_AZURE_IOT_HUB_TOPIC_PROPERTY_BAG_PREFIX`	Include the ‘?’ prefix before the property bag key/value
`CONFIG_B0_BUILD_STRATEGY_FROM_SOURCE`	Build from source
`CONFIG_B0_BUILD_STRATEGY_SKIP_BUILD`	Skip building B0
`CONFIG_B0_BUILD_STRATEGY_USE_HEX_FILE`	Use hex file instead of building B0
`CONFIG_B0_HEX_FILE`	B0 hex file
`CONFIG_B0_MIN_PARTITION_SIZE`	Use minimimum partition size
`CONFIG_B91_CPU_RISCV32`	RISCV32 CPU Architecture
`CONFIG_BACKING_STORE_CUSTOM`	Custom backing store implementation
`CONFIG_BACKING_STORE_RAM`	RAM-based test backing store
`CONFIG_BACKING_STORE_RAM_PAGES`	Number of pages for RAM backing store
`CONFIG_BASE64`	Enable base64 encoding and decoding
`CONFIG_BATTERY_SENSE`	Enable the battery sense circuit
`CONFIG_BH1749`	BH1749 Sensor
`CONFIG_BH1749_TRIGGER`	Trigger for BH1749
`CONFIG_BIG_ENDIAN`
`CONFIG_BLE_CC13XX_CC26XX`
`CONFIG_BL_ROT_VERIFY_EXT_API_ATLEAST_OPTIONAL`
`CONFIG_BL_ROT_VERIFY_EXT_API_ATLEAST_REQUIRED`
`CONFIG_BL_ROT_VERIFY_EXT_API_ENABLED`	Provide the BL_ROT_VERIFY EXT_API to other images.
`CONFIG_BL_ROT_VERIFY_EXT_API_FLAGS`
`CONFIG_BL_ROT_VERIFY_EXT_API_ID`
`CONFIG_BL_ROT_VERIFY_EXT_API_MAX_VER`
`CONFIG_BL_ROT_VERIFY_EXT_API_OPTIONAL`	Request to use the BL_ROT_VERIFY EXT_API (optional).
`CONFIG_BL_ROT_VERIFY_EXT_API_REQUIRED`	Request to use the BL_ROT_VERIFY EXT_API (required).
`CONFIG_BL_ROT_VERIFY_EXT_API_UNUSED`	Don’t request the BL_ROT_VERIFY EXT_API.
`CONFIG_BL_ROT_VERIFY_EXT_API_VER`
`CONFIG_BL_SECP256R1_EXT_API_ATLEAST_OPTIONAL`
`CONFIG_BL_SECP256R1_EXT_API_ATLEAST_REQUIRED`
`CONFIG_BL_SECP256R1_EXT_API_ENABLED`	Provide the BL_SECP256R1 EXT_API to other images.
`CONFIG_BL_SECP256R1_EXT_API_FLAGS`
`CONFIG_BL_SECP256R1_EXT_API_ID`
`CONFIG_BL_SECP256R1_EXT_API_MAX_VER`
`CONFIG_BL_SECP256R1_EXT_API_OPTIONAL`	Request to use the BL_SECP256R1 EXT_API (optional).
`CONFIG_BL_SECP256R1_EXT_API_REQUIRED`	Request to use the BL_SECP256R1 EXT_API (required).
`CONFIG_BL_SECP256R1_EXT_API_UNUSED`	Don’t request the BL_SECP256R1 EXT_API.
`CONFIG_BL_SECP256R1_EXT_API_VER`
`CONFIG_BL_SHA256_EXT_API_ATLEAST_OPTIONAL`
`CONFIG_BL_SHA256_EXT_API_ATLEAST_REQUIRED`
`CONFIG_BL_SHA256_EXT_API_ENABLED`	Provide the BL_SHA256 EXT_API to other images.
`CONFIG_BL_SHA256_EXT_API_FLAGS`
`CONFIG_BL_SHA256_EXT_API_ID`
`CONFIG_BL_SHA256_EXT_API_MAX_VER`
`CONFIG_BL_SHA256_EXT_API_OPTIONAL`	Request to use the BL_SHA256 EXT_API (optional).
`CONFIG_BL_SHA256_EXT_API_REQUIRED`	Request to use the BL_SHA256 EXT_API (required).
`CONFIG_BL_SHA256_EXT_API_UNUSED`	Don’t request the BL_SHA256 EXT_API.
`CONFIG_BL_SHA256_EXT_API_VER`
`CONFIG_BL_VALIDATE_FW_EXT_API_ATLEAST_OPTIONAL`
`CONFIG_BL_VALIDATE_FW_EXT_API_ATLEAST_REQUIRED`
`CONFIG_BL_VALIDATE_FW_EXT_API_ENABLED`	Provide the BL_VALIDATE_FW EXT_API to other images.
`CONFIG_BL_VALIDATE_FW_EXT_API_FLAGS`
`CONFIG_BL_VALIDATE_FW_EXT_API_ID`
`CONFIG_BL_VALIDATE_FW_EXT_API_MAX_VER`
`CONFIG_BL_VALIDATE_FW_EXT_API_OPTIONAL`	Request to use the BL_VALIDATE_FW EXT_API (optional).
`CONFIG_BL_VALIDATE_FW_EXT_API_REQUIRED`	Request to use the BL_VALIDATE_FW EXT_API (required).
`CONFIG_BL_VALIDATE_FW_EXT_API_UNUSED`	Don’t request the BL_VALIDATE_FW EXT_API.
`CONFIG_BL_VALIDATE_FW_EXT_API_VER`
`CONFIG_BMA280`	BMA280 Three Axis Accelerometer Family
`CONFIG_BMA280_PMU_BW_1`	7.81Hz
`CONFIG_BMA280_PMU_BW_2`	15.63HZ
`CONFIG_BMA280_PMU_BW_3`	31.25Hz
`CONFIG_BMA280_PMU_BW_4`	62.5Hz
`CONFIG_BMA280_PMU_BW_5`	125Hz
`CONFIG_BMA280_PMU_BW_6`	250HZ
`CONFIG_BMA280_PMU_BW_7`	500Hz
`CONFIG_BMA280_PMU_BW_8`	unfiltered
`CONFIG_BMA280_PMU_RANGE_16G`	+/-16g
`CONFIG_BMA280_PMU_RANGE_2G`	+/-2g
`CONFIG_BMA280_PMU_RANGE_4G`	+/-4g
`CONFIG_BMA280_PMU_RANGE_8G`	+/-8g
`CONFIG_BMA280_THREAD_PRIORITY`	Thread priority
`CONFIG_BMA280_THREAD_STACK_SIZE`	Thread stack size
`CONFIG_BMA280_TRIGGER`
`CONFIG_BMA280_TRIGGER_GLOBAL_THREAD`	Use global thread
`CONFIG_BMA280_TRIGGER_NONE`	No trigger
`CONFIG_BMA280_TRIGGER_OWN_THREAD`	Use own thread
`CONFIG_BMC150_MAGN`	BMC150_MAGN I2C Magnetometer Chip
`CONFIG_BMC150_MAGN_PRESET_ENHANCED_REGULAR`	Enhanced regular (15, 27, 10)
`CONFIG_BMC150_MAGN_PRESET_HIGH_ACCURACY`	High accuracy (47, 83, 20)
`CONFIG_BMC150_MAGN_PRESET_LOW_POWER`	Low power (3, 3, 10)
`CONFIG_BMC150_MAGN_PRESET_REGULAR`	Regular (9, 15, 10)
`CONFIG_BMC150_MAGN_SAMPLING_RATE_RUNTIME`	Enable dynamic sampling rate
`CONFIG_BMC150_MAGN_SAMPLING_REP_XY`	Enable dynamic XY oversampling
`CONFIG_BMC150_MAGN_SAMPLING_REP_Z`	Enable dynamic Z oversampling
`CONFIG_BMC150_MAGN_TRIGGER`	Enable triggers
`CONFIG_BMC150_MAGN_TRIGGER_DRDY`	Enable data ready trigger
`CONFIG_BMC150_MAGN_TRIGGER_THREAD_STACK`	Thread stack size
`CONFIG_BME280`	BME280/BMP280 sensor
`CONFIG_BME280_FILTER_16`	16
`CONFIG_BME280_FILTER_2`	2
`CONFIG_BME280_FILTER_4`	4
`CONFIG_BME280_FILTER_8`	8
`CONFIG_BME280_FILTER_OFF`	filter off
`CONFIG_BME280_HUMIDITY_OVER_16X`	x16
`CONFIG_BME280_HUMIDITY_OVER_1X`	x1
`CONFIG_BME280_HUMIDITY_OVER_2X`	x2
`CONFIG_BME280_HUMIDITY_OVER_4X`	x4
`CONFIG_BME280_HUMIDITY_OVER_8X`	x8
`CONFIG_BME280_MODE_FORCED`	forced
`CONFIG_BME280_MODE_NORMAL`	normal
`CONFIG_BME280_PRESS_OVER_16X`	x16
`CONFIG_BME280_PRESS_OVER_1X`	x1
`CONFIG_BME280_PRESS_OVER_2X`	x2
`CONFIG_BME280_PRESS_OVER_4X`	x4
`CONFIG_BME280_PRESS_OVER_8X`	x8
`CONFIG_BME280_STANDBY_05MS`	0.5ms
`CONFIG_BME280_STANDBY_1000MS`	1000ms
`CONFIG_BME280_STANDBY_125MS`	125ms
`CONFIG_BME280_STANDBY_2000MS`	2000ms BMP280 / 10ms BME280
`CONFIG_BME280_STANDBY_250MS`	250ms
`CONFIG_BME280_STANDBY_4000MS`	4000ms BMP280 / 20ms BME280
`CONFIG_BME280_STANDBY_500MS`	500ms
`CONFIG_BME280_STANDBY_62MS`	62.5ms
`CONFIG_BME280_TEMP_OVER_16X`	x16
`CONFIG_BME280_TEMP_OVER_1X`	x1
`CONFIG_BME280_TEMP_OVER_2X`	x2
`CONFIG_BME280_TEMP_OVER_4X`	x4
`CONFIG_BME280_TEMP_OVER_8X`	x8
`CONFIG_BME680`	BME680 sensor
`CONFIG_BME680_FILTER_128`	128
`CONFIG_BME680_FILTER_16`	16
`CONFIG_BME680_FILTER_2`	2
`CONFIG_BME680_FILTER_32`	32
`CONFIG_BME680_FILTER_4`	4
`CONFIG_BME680_FILTER_64`	64
`CONFIG_BME680_FILTER_8`	8
`CONFIG_BME680_FILTER_OFF`	filter off
`CONFIG_BME680_HEATR_DUR_LP`	197
`CONFIG_BME680_HEATR_DUR_ULP`	1943
`CONFIG_BME680_HEATR_TEMP_LP`	320
`CONFIG_BME680_HEATR_TEMP_ULP`	400
`CONFIG_BME680_HUMIDITY_OVER_16X`	x16
`CONFIG_BME680_HUMIDITY_OVER_1X`	x1
`CONFIG_BME680_HUMIDITY_OVER_2X`	x2
`CONFIG_BME680_HUMIDITY_OVER_4X`	x4
`CONFIG_BME680_HUMIDITY_OVER_8X`	x8
`CONFIG_BME680_PRESS_OVER_16X`	x16
`CONFIG_BME680_PRESS_OVER_1X`	x1
`CONFIG_BME680_PRESS_OVER_2X`	x2
`CONFIG_BME680_PRESS_OVER_4X`	x4
`CONFIG_BME680_PRESS_OVER_8X`	x8
`CONFIG_BME680_TEMP_OVER_16X`	x16
`CONFIG_BME680_TEMP_OVER_1X`	x1
`CONFIG_BME680_TEMP_OVER_2X`	x2
`CONFIG_BME680_TEMP_OVER_4X`	x4
`CONFIG_BME680_TEMP_OVER_8X`	x8
`CONFIG_BMG160`	Bosch BMG160 gyroscope support
`CONFIG_BMG160_I2C_SPEED_FAST`	Fast
`CONFIG_BMG160_I2C_SPEED_STANDARD`	Standard
`CONFIG_BMG160_ODR_100`	100 Hz
`CONFIG_BMG160_ODR_1000`	1000 Hz
`CONFIG_BMG160_ODR_200`	200 Hz
`CONFIG_BMG160_ODR_2000`	2000 Hz
`CONFIG_BMG160_ODR_400`	400 Hz
`CONFIG_BMG160_ODR_RUNTIME`	Set at runtime.
`CONFIG_BMG160_RANGE_1000DPS`	1000 DPS
`CONFIG_BMG160_RANGE_125DPS`	125 DPS
`CONFIG_BMG160_RANGE_2000DPS`	2000 DPS
`CONFIG_BMG160_RANGE_250DPS`	250 DPS
`CONFIG_BMG160_RANGE_500DPS`	500 DPS
`CONFIG_BMG160_RANGE_RUNTIME`	Set at runtime.
`CONFIG_BMG160_THREAD_PRIORITY`	Own thread priority
`CONFIG_BMG160_THREAD_STACK_SIZE`	Own thread stack size
`CONFIG_BMG160_TRIGGER`
`CONFIG_BMG160_TRIGGER_GLOBAL_THREAD`	Use global thread
`CONFIG_BMG160_TRIGGER_NONE`	No trigger
`CONFIG_BMG160_TRIGGER_OWN_THREAD`	Use own thread
`CONFIG_BMI160`	Bosch BMI160 inertial measurement unit
`CONFIG_BMI160_ACCEL_ODR_100`	100 Hz
`CONFIG_BMI160_ACCEL_ODR_1600`	1600 Hz
`CONFIG_BMI160_ACCEL_ODR_200`	200 Hz
`CONFIG_BMI160_ACCEL_ODR_25`	25 Hz
`CONFIG_BMI160_ACCEL_ODR_25_16`	1.56 Hz
`CONFIG_BMI160_ACCEL_ODR_25_2`	12.5 Hz
`CONFIG_BMI160_ACCEL_ODR_25_32`	0.78 Hz
`CONFIG_BMI160_ACCEL_ODR_25_4`	6.25 Hz
`CONFIG_BMI160_ACCEL_ODR_25_8`	3.125 Hz
`CONFIG_BMI160_ACCEL_ODR_400`	400 Hz
`CONFIG_BMI160_ACCEL_ODR_50`	50 Hz
`CONFIG_BMI160_ACCEL_ODR_800`	800 Hz
`CONFIG_BMI160_ACCEL_ODR_RUNTIME`	Set at runtime.
`CONFIG_BMI160_ACCEL_PMU_LOW_POWER`	low power
`CONFIG_BMI160_ACCEL_PMU_NORMAL`	normal
`CONFIG_BMI160_ACCEL_PMU_RUNTIME`	Set at runtime.
`CONFIG_BMI160_ACCEL_PMU_SUSPEND`	suspended/not used
`CONFIG_BMI160_ACCEL_RANGE_16G`	16G
`CONFIG_BMI160_ACCEL_RANGE_2G`	2G
`CONFIG_BMI160_ACCEL_RANGE_4G`	4G
`CONFIG_BMI160_ACCEL_RANGE_8G`	8G
`CONFIG_BMI160_ACCEL_RANGE_RUNTIME`	Set at runtime.
`CONFIG_BMI160_GYRO_ODR_100`	100 Hz
`CONFIG_BMI160_GYRO_ODR_1600`	1600 Hz
`CONFIG_BMI160_GYRO_ODR_200`	200 Hz
`CONFIG_BMI160_GYRO_ODR_25`	25 Hz
`CONFIG_BMI160_GYRO_ODR_3200`	3200 Hz
`CONFIG_BMI160_GYRO_ODR_400`	400 Hz
`CONFIG_BMI160_GYRO_ODR_50`	50 Hz
`CONFIG_BMI160_GYRO_ODR_800`	800 Hz
`CONFIG_BMI160_GYRO_ODR_RUNTIME`	Set at runtime.
`CONFIG_BMI160_GYRO_PMU_FAST_STARTUP`	fast start-up
`CONFIG_BMI160_GYRO_PMU_NORMAL`	normal
`CONFIG_BMI160_GYRO_PMU_RUNTIME`	Set at runtime.
`CONFIG_BMI160_GYRO_PMU_SUSPEND`	suspended/not used
`CONFIG_BMI160_GYRO_RANGE_1000DPS`	1000 DPS
`CONFIG_BMI160_GYRO_RANGE_125DPS`	125 DPS
`CONFIG_BMI160_GYRO_RANGE_2000DPS`	2000 DPS
`CONFIG_BMI160_GYRO_RANGE_250DPS`	250 DPS
`CONFIG_BMI160_GYRO_RANGE_500DPS`	500 DPS
`CONFIG_BMI160_GYRO_RANGE_RUNTIME`	Set at runtime.
`CONFIG_BMI160_THREAD_PRIORITY`	Own thread priority
`CONFIG_BMI160_THREAD_STACK_SIZE`	Own thread stack size
`CONFIG_BMI160_TRIGGER`
`CONFIG_BMI160_TRIGGER_GLOBAL_THREAD`	Use global thread
`CONFIG_BMI160_TRIGGER_NONE`	No trigger
`CONFIG_BMI160_TRIGGER_OWN_THREAD`	Use own thread
`CONFIG_BMI270`	BMI270 Inertial measurement unit
`CONFIG_BMM150`	BMM150 I2C Geomagnetic Chip
`CONFIG_BMM150_PRESET_ENHANCED_REGULAR`	Enhanced regular (15, 27, 10)
`CONFIG_BMM150_PRESET_HIGH_ACCURACY`	High accuracy (47, 83, 20)
`CONFIG_BMM150_PRESET_LOW_POWER`	Low power (3, 3, 10)
`CONFIG_BMM150_PRESET_REGULAR`	Regular (9, 15, 10)
`CONFIG_BMM150_SAMPLING_RATE_RUNTIME`	Enable dynamic sampling rate
`CONFIG_BMM150_SAMPLING_REP_XY`	Enable dynamic XY oversampling
`CONFIG_BMM150_SAMPLING_REP_Z`	Enable dynamic Z oversampling
`CONFIG_BMP388`	Bosch BMP388 pressure sensor
`CONFIG_BMP388_ODR_RUNTIME`	Change ODR at runtime.
`CONFIG_BMP388_OSR_RUNTIME`	Change OSR at runtime.
`CONFIG_BMP388_THREAD_PRIORITY`	Own thread priority
`CONFIG_BMP388_THREAD_STACK_SIZE`	Own thread stack size
`CONFIG_BMP388_TRIGGER`
`CONFIG_BMP388_TRIGGER_DIRECT`	Use IRQ handler
`CONFIG_BMP388_TRIGGER_GLOBAL_THREAD`	Use global thread
`CONFIG_BMP388_TRIGGER_NONE`	No trigger
`CONFIG_BMP388_TRIGGER_OWN_THREAD`	Use own thread
`CONFIG_BOARD`
`CONFIG_BOARD_96B_AEROCORE2`	96Boards AEROCORE2 (STM32F427)
`CONFIG_BOARD_96B_ARGONKEY`	96Boards Argonkey
`CONFIG_BOARD_96B_AVENGER96`	96Boards Avenger96 Board
`CONFIG_BOARD_96B_CARBON`	96Boards Carbon (STM32F401)
`CONFIG_BOARD_96B_CARBON_NRF51`	96Boards Carbon (nRF51)
`CONFIG_BOARD_96B_MEERKAT96`	96Boards Meerkat96 board
`CONFIG_BOARD_96B_NEONKEY`	96Boards Neonkey
`CONFIG_BOARD_96B_NITROGEN`	96Boards Nitrogen
`CONFIG_BOARD_96B_STM32_SENSOR_MEZ`	96Boards STM32 Sensor Mezzanine Board
`CONFIG_BOARD_96B_WISTRIO`	96boards WisTrio Development Board
`CONFIG_BOARD_ACRN`	ACRN User OS
`CONFIG_BOARD_ACTINIUS_ICARUS`	Actinius Icarus
`CONFIG_BOARD_ACTINIUS_ICARUS_BEE`	Actinius Icarus Bee
`CONFIG_BOARD_ACTINIUS_ICARUS_BEE_NS`	Actinius Icarus Bee Non-Secure
`CONFIG_BOARD_ACTINIUS_ICARUS_NS`	Actinius Icarus Non-Secure
`CONFIG_BOARD_ACTINIUS_ICARUS_SOM`	Actinius Icarus SoM
`CONFIG_BOARD_ACTINIUS_ICARUS_SOM_NS`	Actinius Icarus SoM Non-Secure
`CONFIG_BOARD_ADAFRUIT_FEATHER_M0_BASIC_PROTO`	Adafruit Feather M0 Basic Proto
`CONFIG_BOARD_ADAFRUIT_FEATHER_NRF52840`	Adafruit Feather nRF52840 Express
`CONFIG_BOARD_ADAFRUIT_FEATHER_STM32F405`	Feather STM32F405 Express Board
`CONFIG_BOARD_ADAFRUIT_ITSYBITSY_M4_EXPRESS`	Adafruit ItsyBitsy M4 Express
`CONFIG_BOARD_ADAFRUIT_TRINKET_M0`	Adafruit Trinket M0
`CONFIG_BOARD_ALTERA_MAX10`	Altera MAX10 Board
`CONFIG_BOARD_ARDUINO_DUE`	Arduino Due Board
`CONFIG_BOARD_ARDUINO_NANO_33_BLE`	Arduino Nano 33 BLE board
`CONFIG_BOARD_ARDUINO_NANO_33_BLE_EN_USB_CONSOLE`	Sends the console output over the USB port
`CONFIG_BOARD_ARDUINO_NANO_33_BLE_INIT_SENSORS`	Initializes the internal I2C sensors on the board
`CONFIG_BOARD_ARDUINO_NANO_33_IOT`	Arduino Nano 33 IOT
`CONFIG_BOARD_ARDUINO_ZERO`	Arduino Zero
`CONFIG_BOARD_ARTY_A7_ARM_DESIGNSTART_M1`	Digilent Arty A7 ARM DesignStart Cortex-M1
`CONFIG_BOARD_ARTY_A7_ARM_DESIGNSTART_M3`	Digilent Arty A7 ARM DesignStart Cortex-M3
`CONFIG_BOARD_ATSAMD20_XPRO`	SAM D20 Xplained Pro
`CONFIG_BOARD_ATSAMD21_XPRO`	SAM D21 Xplained Pro
`CONFIG_BOARD_ATSAME54_XPRO`	SAM E54 Xplained Pro
`CONFIG_BOARD_ATSAMR21_XPRO`	SAM R21 Xplained Pro
`CONFIG_BOARD_BBC_MICROBIT`	BBC MICRO:BIT
`CONFIG_BOARD_BBC_MICROBIT_V2`	BBC MICRO:BIT_V2
`CONFIG_BOARD_BCM958402M2_A72`	Broadcom Viper BCM958402M2_A72
`CONFIG_BOARD_BCM958402M2_M7`	Broadcom Viper BCM958402M2_M7
`CONFIG_BOARD_BEAGLEV_STARLIGHT_JH7100`	BeagleV Starlight JH7100 RISCV64 target
`CONFIG_BOARD_BL5340_DVK_CPUAPP`	BL5340-DVK (nRF5340) Application MCU
`CONFIG_BOARD_BL5340_DVK_CPUAPP_NS`	BL5340-DVK (nRF5340) Application MCU non-secure
`CONFIG_BOARD_BL5340_DVK_CPUNET`	BL5340-DVK (nRF5340) Network MCU
`CONFIG_BOARD_BL652_DVK`	BL652 DVK
`CONFIG_BOARD_BL653_DVK`	BL653 DVK
`CONFIG_BOARD_BL654_DVK`	BL654 DVK
`CONFIG_BOARD_BL654_SENSOR_BOARD`	BL654 Sensor Board
`CONFIG_BOARD_BLACKPILL_F401CE`	WeAct Studio Black Pill V3.0+ Board
`CONFIG_BOARD_BLACKPILL_F411CE`	WeAct Studio Black Pill V2.0+ Board
`CONFIG_BOARD_BLACK_F407VE`	Black F407VE Development Board
`CONFIG_BOARD_BLACK_F407ZG_PRO`	Black F407ZG Pro Development Board
`CONFIG_BOARD_BT510`	BT510
`CONFIG_BOARD_BT6X0`	BT6X0
`CONFIG_BOARD_B_L072Z_LRWAN1`	STMicroelectronics B-L072Z-LRWAN1 Discovery kit
`CONFIG_BOARD_B_L4S5I_IOT01A`	STM32L4S5I IOT Discovery kit
`CONFIG_BOARD_CC1352R1_LAUNCHXL`	TI CC1352R1 LaunchXL
`CONFIG_BOARD_CC1352R_SENSORTAG`	TI CC1352R SensorTag
`CONFIG_BOARD_CC26X2R1_LAUNCHXL`	TI CC26x2R1 LaunchXL
`CONFIG_BOARD_CC3220SF_LAUNCHXL`	TI CC3220SF LAUNCHXL
`CONFIG_BOARD_CC3235SF_LAUNCHXL`	TI CC3235SF LAUNCHXL
`CONFIG_BOARD_CCS_VDD_PWR_CTRL_INIT_PRIORITY`	CCS_VDD power rail init priority
`CONFIG_BOARD_CIRCUITDOJO_FEATHER_NRF9160`	Circuit Dojo nRF9160 Feather
`CONFIG_BOARD_CIRCUITDOJO_FEATHER_NRF9160_NS`	Circuit Dojo nRF9160 Feather non-secure
`CONFIG_BOARD_COLIBRI_IMX7D_M4`	Toradex Colibri iMX7 Dual
`CONFIG_BOARD_CONTEXTELEC_ABC`	nRF52840 based Advanced BLE Cell
`CONFIG_BOARD_CY8CKIT_062_BLE_M0`	PSoC6 BLE Pioneer Kit [M0 CPU0]
`CONFIG_BOARD_CY8CKIT_062_BLE_M4`	PSoC6 BLE Pioneer Kit [M4 CPU1]
`CONFIG_BOARD_CY8CKIT_062_WIFI_BT_M0`	PSoC6 WiFi-BT Pioneer Kit M0
`CONFIG_BOARD_CY8CKIT_062_WIFI_BT_M4`	PSoC6 WiFi-BT Pioneer Kit M4
`CONFIG_BOARD_DECAWAVE_DWM1001_DEV`	Decawave DWM1001-DEV
`CONFIG_BOARD_DEGU_EVK`	DEGU_EVK
`CONFIG_BOARD_DEPRECATED_RELEASE`
`CONFIG_BOARD_DISCO_L475_IOT1`	Discovery IoT L475 Development Board
`CONFIG_BOARD_DRAGINO_LSN50`	Dragino LSN50 Sensor Node
`CONFIG_BOARD_EFM32GG_SLWSTK6121A`	SiLabs EFM32GG-SLWSTK6121A (WGM160P)
`CONFIG_BOARD_EFM32GG_STK3701A`	SiLabs EFM32GG-STK3701A (Giant Gecko 11)
`CONFIG_BOARD_EFM32HG_SLSTK3400A`	SiLabs EFM32HG-SLSTK3400A (Happy Gecko)
`CONFIG_BOARD_EFM32PG_STK3401A`	SiLabs EFM32PG-STK3401A (Pearl Gecko)
`CONFIG_BOARD_EFM32PG_STK3402A`	SiLabs EFM32PG-STK3402A (Pearl Gecko)
`CONFIG_BOARD_EFM32PG_STK3402A_JG`	SiLabs EFM32PG-STK3402A (Jade Gecko)
`CONFIG_BOARD_EFM32WG_STK3800`	SiLabs EFM32WG-STK3800 (Wonder Gecko)
`CONFIG_BOARD_EFR32MG_SLTB004A`	SiLabs EFR32MG-SLTB004A (Thunderboard Sense 2)
`CONFIG_BOARD_EFR32_RADIO`
`CONFIG_BOARD_EFR32_RADIO_BRD4104A`	Silicon Labs BRD4104A (Blue Gecko Radio Board)
`CONFIG_BOARD_EFR32_RADIO_BRD4180A`	Silicon Labs BRD4180A (Mighty Gecko Radio Board)
`CONFIG_BOARD_EFR32_RADIO_BRD4250B`	Silicon Labs BRD4250B (Flex Gecko Radio Board)
`CONFIG_BOARD_EFR32_RADIO_BRD4255A`	Silicon Labs BRD4255A (Flex Gecko Radio Board)
`CONFIG_BOARD_EHL_CRB`	Elkhart Lake CRB
`CONFIG_BOARD_EHL_CRB_SBL`	Elkhart Lake CRB (with Slim Bootloader)
`CONFIG_BOARD_EMSDP`	EM Software Development Platform
`CONFIG_BOARD_EM_STARTERKIT`	ARC EM Starter Kit
`CONFIG_BOARD_EM_STARTERKIT_R22`	2.2
`CONFIG_BOARD_EM_STARTERKIT_R23`	2.3
`CONFIG_BOARD_ENABLE_CPUNET`	Enable nRF53 Network MCU
`CONFIG_BOARD_ENABLE_DCDC`	Enable DCDC mode
`CONFIG_BOARD_ENABLE_DCDC_APP`	Enable Application MCU DCDC converter
`CONFIG_BOARD_ENABLE_DCDC_HV`	Enable High Voltage DCDC converter
`CONFIG_BOARD_ENABLE_DCDC_NET`	Enable Network MCU DCDC converter
`CONFIG_BOARD_ESP32`	ESP32 Development Board
`CONFIG_BOARD_ESP32C3_DEVKITM`	ESP32C3 Devkit-M Board
`CONFIG_BOARD_FAZE`	Seagate FireCuda Gaming SSD (FaZe)
`CONFIG_BOARD_FRDM_K22F`	NXP FRDM-K22F
`CONFIG_BOARD_FRDM_K64F`	Freescale FRDM-K64F
`CONFIG_BOARD_FRDM_K82F`	NXP FRDM-K82F
`CONFIG_BOARD_FRDM_KL25Z`	NXP FRDM-KL25Z
`CONFIG_BOARD_FRDM_KW41Z`	NXP FRDM-KW41Z
`CONFIG_BOARD_FVP_BASER_AEMV8R`	FVP BaseR AEMv8R simulation board
`CONFIG_BOARD_FVP_BASE_REVC_2XAEMV8A`	FVP Base RevC AEMv8A simulation board
`CONFIG_BOARD_GENERIC_LEON3`	Generic LEON3 system
`CONFIG_BOARD_GOOGLE_KUKUI`	Google Kukui EC
`CONFIG_BOARD_GR716A_MINI`	GR716-MINI Development Board
`CONFIG_BOARD_HAS_NRF5_BOOTLOADER`	Board has nRF5 bootloader
`CONFIG_BOARD_HAS_TIMING_FUNCTIONS`
`CONFIG_BOARD_HEXIWEAR_K64`	NXP Hexiwear K64
`CONFIG_BOARD_HEXIWEAR_KW40Z`	Hexiwear KW40Z
`CONFIG_BOARD_HIFIVE1`	HiFive1 target
`CONFIG_BOARD_HIFIVE1_REVB`	HiFive1 Rev B target
`CONFIG_BOARD_HOLYIOT_YJ16019`	Holyiot YJ-16019
`CONFIG_BOARD_HSDK`	ARC HS Development Kit
`CONFIG_BOARD_ICARUS_BEE_LOG_LEVEL`
`CONFIG_BOARD_ICARUS_BEE_LOG_LEVEL_DBG`	Debug
`CONFIG_BOARD_ICARUS_BEE_LOG_LEVEL_ERR`	Error
`CONFIG_BOARD_ICARUS_BEE_LOG_LEVEL_INF`	Info
`CONFIG_BOARD_ICARUS_BEE_LOG_LEVEL_OFF`	Off
`CONFIG_BOARD_ICARUS_BEE_LOG_LEVEL_WRN`	Warning
`CONFIG_BOARD_ICARUS_LOG_LEVEL`
`CONFIG_BOARD_ICARUS_LOG_LEVEL_DBG`	Debug
`CONFIG_BOARD_ICARUS_LOG_LEVEL_ERR`	Error
`CONFIG_BOARD_ICARUS_LOG_LEVEL_INF`	Info
`CONFIG_BOARD_ICARUS_LOG_LEVEL_OFF`	Off
`CONFIG_BOARD_ICARUS_LOG_LEVEL_WRN`	Warning
`CONFIG_BOARD_ICARUS_SOM_LOG_LEVEL`
`CONFIG_BOARD_ICARUS_SOM_LOG_LEVEL_DBG`	Debug
`CONFIG_BOARD_ICARUS_SOM_LOG_LEVEL_ERR`	Error
`CONFIG_BOARD_ICARUS_SOM_LOG_LEVEL_INF`	Info
`CONFIG_BOARD_ICARUS_SOM_LOG_LEVEL_OFF`	Off
`CONFIG_BOARD_ICARUS_SOM_LOG_LEVEL_WRN`	Warning
`CONFIG_BOARD_INIT_PRIORITY`	Board initialization priority
`CONFIG_BOARD_INTEL_ADSP_CAVS15`	Intel ADSP CAVS 1.5
`CONFIG_BOARD_INTEL_ADSP_CAVS18`	Intel ADSP CAVS 1.8
`CONFIG_BOARD_INTEL_ADSP_CAVS20`	Intel ADSP CAVS 2.0
`CONFIG_BOARD_INTEL_ADSP_CAVS25`	Intel ADSP CAVS 2.5
`CONFIG_BOARD_INTEL_S1000_CRB`	Xtensa on Intel_S1000
`CONFIG_BOARD_IOTDK`	ARC IoT Development Kit
`CONFIG_BOARD_IP_K66F`	Segger IP-K66F
`CONFIG_BOARD_IT8XXX2_EVB`	IT8XXX2 EV-board
`CONFIG_BOARD_LITEX_VEXRISCV`	Board with LiteX/VexRiscV CPU
`CONFIG_BOARD_LORA_E5_DEV_BOARD`	LoRa E5 Development Board
`CONFIG_BOARD_LPCXPRESSO11U68`	NXP LPCXPRESSO-11U68
`CONFIG_BOARD_LPCXPRESSO54114_M0`	NXP LPCXPRESSO-54114 M0
`CONFIG_BOARD_LPCXPRESSO54114_M4`	NXP LPCXPRESSO-54114 M4
`CONFIG_BOARD_LPCXPRESSO55S16`	NXP LPCXPRESSO-55S16
`CONFIG_BOARD_LPCXPRESSO55S28`	NXP LPCXPRESSO-55S28
`CONFIG_BOARD_LPCXPRESSO55S69_CPU0`	NXP LPCXPRESSO-55S69 [CPU0]
`CONFIG_BOARD_LPCXPRESSO55S69_CPU1`	NXP LPCXPRESSO-55S69 [CPU1]
`CONFIG_BOARD_M2GL025_MIV`	Microsemi M2GL025 IGLOO2 dev board with Mi-V CPU
`CONFIG_BOARD_MEC1501MODULAR_ASSY6885`	Microchip MEC1501 Modular ASSY 6885 Development board
`CONFIG_BOARD_MEC15XXEVB_ASSY6853`	Microchip MEC15XX EVB ASSY 6853 Development board
`CONFIG_BOARD_MEC172XEVB_ASSY6906`	Microchip MEC172X EVB ASSY 6906 Development board
`CONFIG_BOARD_MEC2016EVB_ASSY6797`	Microchip MEC2016 EVB ASSY 6797 Development board
`CONFIG_BOARD_MERCURY_XU`	Mercury XU Board
`CONFIG_BOARD_MIKROE_CLICKER_2`	MikroE Clicker 2 for STM32 board
`CONFIG_BOARD_MIKROE_MINI_M4_FOR_STM32`	Mikroe MINI-M4 for STM32 Board
`CONFIG_BOARD_MIMX8MM_EVK`	NXP i.MX8M Mini EVK
`CONFIG_BOARD_MIMXRT1010_EVK`	NXP MIMXRT1010-EVK
`CONFIG_BOARD_MIMXRT1015_EVK`	NXP MIMXRT1015-EVK
`CONFIG_BOARD_MIMXRT1020_EVK`	NXP MIMXRT1020-EVK
`CONFIG_BOARD_MIMXRT1024_EVK`	NXP MIMXRT1024-EVK
`CONFIG_BOARD_MIMXRT1050_EVK`	NXP MIMXRT1050-EVK
`CONFIG_BOARD_MIMXRT1050_EVK_QSPI`	NXP MIMXRT1050-EVK-QSPI
`CONFIG_BOARD_MIMXRT1060_EVK`	NXP MIMXRT1060-EVK
`CONFIG_BOARD_MIMXRT1060_EVK_HYPERFLASH`	NXP MIMXRT1060-EVK-HYPERFLASH
`CONFIG_BOARD_MIMXRT1064_EVK`	NXP MIMXRT1064-EVK
`CONFIG_BOARD_MIMXRT1170_EVK_CM4`	NXP MIMXRT1170-EVK CM4
`CONFIG_BOARD_MIMXRT1170_EVK_CM7`	NXP MIMXRT1170-EVK CM7
`CONFIG_BOARD_MIMXRT685_EVK`	NXP MIMXRT685-EVK
`CONFIG_BOARD_MM_SWIFTIO`	MM MM-SWIFTIO
`CONFIG_BOARD_MPS2_AN385`	ARM Cortex-M3 SMM on V2M-MPS2 (Application Note AN385)
`CONFIG_BOARD_MPS2_AN521_CPU0`	ARM Cortex-M33 SMM on V2M-MPS2 (AN521) (CPU0)
`CONFIG_BOARD_MPS2_AN521_CPU0_NS`	ARM Cortex-M33 SMM on V2M-MPS2 (AN521) (CPU0 Non-Secure)
`CONFIG_BOARD_MPS2_AN521_CPU1`	ARM Cortex-M33 SMM on V2M-MPS2 (AN521) CPU1
`CONFIG_BOARD_MPS3_AN547`	Arm Cortex-M55 (Corstone-300, SSE-300 w/Ethos-U55) on MPS3 (AN547)
`CONFIG_BOARD_MSP_EXP432P401R_LAUNCHXL`	TI MSP-EXP432P401R LAUNCHXL
`CONFIG_BOARD_MUSCA_B1`	ARM Cortex-M33 SMM on V2M-MUSCA
`CONFIG_BOARD_MUSCA_S1`	ARM Cortex-M33 SMM on V2M-MUSCA-S1
`CONFIG_BOARD_NATIVE_POSIX`
`CONFIG_BOARD_NATIVE_POSIX_32BIT`	Native POSIX for 32-bit host
`CONFIG_BOARD_NATIVE_POSIX_64BIT`	Native POSIX for 64-bit host
`CONFIG_BOARD_NPCX7M6FB_EVB`	Nuvoton NPCX7M6FB EVB Development board
`CONFIG_BOARD_NPCX9M6F_EVB`	Nuvoton NPCX9M6F EVB Development board
`CONFIG_BOARD_NRF21540DK_NRF52840`	nRF21540 DK NRF52840
`CONFIG_BOARD_NRF51DK_NRF51422`	nRF51 DK NRF51422
`CONFIG_BOARD_NRF51DONGLE_NRF51422`	nRF51 Dongle NRF51422
`CONFIG_BOARD_NRF51_BLE400`	nRF51 BLE400
`CONFIG_BOARD_NRF51_BLENANO`	nRF51 BLENANO
`CONFIG_BOARD_NRF51_VBLUNO51`	nRF51 VBLUno51 BLE
`CONFIG_BOARD_NRF52832_MDK`	nRF52832-MDK
`CONFIG_BOARD_NRF52833DK_NRF52820`	nRF52833 DK NRF52820
`CONFIG_BOARD_NRF52833DK_NRF52833`	NRF52833 DK NRF52833
`CONFIG_BOARD_NRF52840DK_NRF52811`	nRF52840 DK NRF52811
`CONFIG_BOARD_NRF52840DK_NRF52840`	nRF52840 DK NRF52840
`CONFIG_BOARD_NRF52840DONGLE_NRF52840`	nRF52840 DONGLE NRF52840
`CONFIG_BOARD_NRF52840_BLIP`	Electronut Labs Blip
`CONFIG_BOARD_NRF52840_MDK`	NRF52840-MDK
`CONFIG_BOARD_NRF52840_PAPYR`	NRF52840 PAPYR
`CONFIG_BOARD_NRF52DK_NRF52805`	nRF52 DK NRF52805
`CONFIG_BOARD_NRF52DK_NRF52810`	nRF52 DK NRF52810
`CONFIG_BOARD_NRF52DK_NRF52832`	nRF52 DK NRF52832
`CONFIG_BOARD_NRF52_ADAFRUIT_FEATHER`	nRF52 ADAFRUIT FEATHER
`CONFIG_BOARD_NRF52_BLENANO2`	nRF52 BLENANO2
`CONFIG_BOARD_NRF52_BSIM`	NRF52 simulation model
`CONFIG_BOARD_NRF52_SPARKFUN`	nRF52 SPARKFUN
`CONFIG_BOARD_NRF52_VBLUNO52`	nRF52 VBLUno52
`CONFIG_BOARD_NRF5340DK_NRF5340_CPUAPP`	nRF5340 DK nRF5340 Application MCU
`CONFIG_BOARD_NRF5340DK_NRF5340_CPUAPP_NS`	nRF5340 DK nRF5340 Application MCU non-secure
`CONFIG_BOARD_NRF5340DK_NRF5340_CPUNET`	nRF5340 DK NRF5340 Network MCU
`CONFIG_BOARD_NRF9160DK_LOG_LEVEL`
`CONFIG_BOARD_NRF9160DK_LOG_LEVEL_DBG`	Debug
`CONFIG_BOARD_NRF9160DK_LOG_LEVEL_ERR`	Error
`CONFIG_BOARD_NRF9160DK_LOG_LEVEL_INF`	Info
`CONFIG_BOARD_NRF9160DK_LOG_LEVEL_OFF`	Off
`CONFIG_BOARD_NRF9160DK_LOG_LEVEL_WRN`	Warning
`CONFIG_BOARD_NRF9160DK_NRF52840`	NRF9160 DK NRF52840
`CONFIG_BOARD_NRF9160DK_NRF9160`	nRF9160 DK NRF9160
`CONFIG_BOARD_NRF9160DK_NRF9160_NS`	nRF9160 DK NRF9160 non-secure
`CONFIG_BOARD_NRF9160_INNBLUE21`	nRF9160 innblue v2.1
`CONFIG_BOARD_NRF9160_INNBLUE21_NS`	nRF9160 innblue v2.1 non-secure
`CONFIG_BOARD_NRF9160_INNBLUE22`	nRF9160 innblue v2.2
`CONFIG_BOARD_NRF9160_INNBLUE22_NS`	nRF9160 innblue V2.2 non-secure
`CONFIG_BOARD_NSIM`	ARC nSIM simulator
`CONFIG_BOARD_NUCLEO_F030R8`	NUCLEO-64 F030R8 Development Board
`CONFIG_BOARD_NUCLEO_F031K6`	NUCLEO-32 F031K6 Development Board
`CONFIG_BOARD_NUCLEO_F070RB`	NUCLEO-64 F070RB Development Board
`CONFIG_BOARD_NUCLEO_F091RC`	NUCLEO-64 F091RC Development Board
`CONFIG_BOARD_NUCLEO_F103RB`	NUCLEO-64 F103RB Development Board
`CONFIG_BOARD_NUCLEO_F207ZG`	NUCLEO-144 F207ZG Development Board
`CONFIG_BOARD_NUCLEO_F302R8`	NUCLEO-64 F302R8 Development Board
`CONFIG_BOARD_NUCLEO_F303K8`	NUCLEO-32 F303K8 Development Board
`CONFIG_BOARD_NUCLEO_F303RE`	NUCLEO-64 F303RE Development Board
`CONFIG_BOARD_NUCLEO_F334R8`	NUCLEO-64 F334R8 Development Board
`CONFIG_BOARD_NUCLEO_F401RE`	NUCLEO-64 F401RE Development Board
`CONFIG_BOARD_NUCLEO_F410RB`	Nucleo F410RB Development Board
`CONFIG_BOARD_NUCLEO_F411RE`	NUCLEO-64 F411RE Development Board
`CONFIG_BOARD_NUCLEO_F412ZG`	NUCLEO-144 F412ZG Development Board
`CONFIG_BOARD_NUCLEO_F413ZH`	NUCLEO-144 F413ZH Development Board
`CONFIG_BOARD_NUCLEO_F429ZI`	NUCLEO-144 F429ZI Development Board
`CONFIG_BOARD_NUCLEO_F446RE`	Nucleo F446RE Development Board
`CONFIG_BOARD_NUCLEO_F746ZG`	Nucleo F746ZG Development Board
`CONFIG_BOARD_NUCLEO_F756ZG`	Nucleo F756ZG Development Board
`CONFIG_BOARD_NUCLEO_F767ZI`	Nucleo F767ZI Development Board
`CONFIG_BOARD_NUCLEO_G071RB`	NUCLEO-64 G071RB Development Board
`CONFIG_BOARD_NUCLEO_G0B1RE`	NUCLEO-64 G0B1RE Development Board
`CONFIG_BOARD_NUCLEO_G431RB`	Nucleo G431RB Development Board
`CONFIG_BOARD_NUCLEO_G474RE`	Nucleo G474RE Development Board
`CONFIG_BOARD_NUCLEO_H723ZG`	NUCLEO-H723ZG Development Board
`CONFIG_BOARD_NUCLEO_H743ZI`	Nucleo H743ZI Development Board
`CONFIG_BOARD_NUCLEO_H745ZI_Q_M4`	NUCLEO-H745ZI-Q Development Board
`CONFIG_BOARD_NUCLEO_H745ZI_Q_M7`	NUCLEO-H745ZI-Q Development Board
`CONFIG_BOARD_NUCLEO_H753ZI`	Nucleo H753ZI Development Board
`CONFIG_BOARD_NUCLEO_L011K4`	NUCLEO-32 L011K4 Development Board
`CONFIG_BOARD_NUCLEO_L031K6`	NUCLEO-32 L031K6 Development Board
`CONFIG_BOARD_NUCLEO_L053R8`	NUCLEO-64 L053R8 Development Board
`CONFIG_BOARD_NUCLEO_L073RZ`	NUCLEO-64 L073RZ Development Board
`CONFIG_BOARD_NUCLEO_L152RE`	NUCLEO-64 L152RE Development Board
`CONFIG_BOARD_NUCLEO_L412RB_P`	Nucleo L412RB-P Development Board
`CONFIG_BOARD_NUCLEO_L432KC`	Nucleo L432KC Development Board
`CONFIG_BOARD_NUCLEO_L433RC_P`	Nucleo L433RC-P Development Board
`CONFIG_BOARD_NUCLEO_L452RE`	Nucleo L452RE Development Board
`CONFIG_BOARD_NUCLEO_L452RE_P`	Nucleo L452RE-P Development Board
`CONFIG_BOARD_NUCLEO_L476RG`	Nucleo L476RG Development Board
`CONFIG_BOARD_NUCLEO_L496ZG`	Nucleo L496ZG Development Board
`CONFIG_BOARD_NUCLEO_L4R5ZI`	Nucleo L4R5ZI Development Board
`CONFIG_BOARD_NUCLEO_L552ZE_Q`	Nucleo L552ZE Q Development Board
`CONFIG_BOARD_NUCLEO_WB55RG`	Nucleo WB55RG Development Board
`CONFIG_BOARD_NUCLEO_WL55JC`	Nucleo WL55JC Development Board
`CONFIG_BOARD_NUVOTON_PFM_M487`	NUVOTON PFM MP487 Development Board
`CONFIG_BOARD_NXP_LS1046ARDB`	NXP Layerscape ls1046ardb
`CONFIG_BOARD_ODROID_GO`	ODROID-GO Game Kit
`CONFIG_BOARD_OLIMEXINO_STM32`	OLIMEXINO-STM32 Development Board
`CONFIG_BOARD_OLIMEX_STM32_E407`	OLIMEX-STM32-E407 Development Board
`CONFIG_BOARD_OLIMEX_STM32_H103`	OLIMEX-STM32-H103 Development Board
`CONFIG_BOARD_OLIMEX_STM32_H407`	OLIMEX-STM32-H407 Development Board
`CONFIG_BOARD_OLIMEX_STM32_P405`	OLIMEX-STM32-P405 Development Board
`CONFIG_BOARD_PARTICLE_ARGON`	Particle Argon Board
`CONFIG_BOARD_PARTICLE_BORON`	Particle Boron Board
`CONFIG_BOARD_PARTICLE_XENON`	Particle Xenon Board
`CONFIG_BOARD_PICO_PI_M4`	Pico-PI iMX7D Dual
`CONFIG_BOARD_PINETIME_DEVKIT0`	PineTime DevKit0
`CONFIG_BOARD_PINNACLE_100_DVK`	Pinnacle 100 DVK
`CONFIG_BOARD_QEMU_ARC`	ARC QEMU for EM & HS cores
`CONFIG_BOARD_QEMU_CORTEX_A53`	Cortex-A53 Emulation (QEMU)
`CONFIG_BOARD_QEMU_CORTEX_M0`	Cortex-M0 Emulation (QEMU)
`CONFIG_BOARD_QEMU_CORTEX_M3`	Cortex-M3 Emulation (QEMU)
`CONFIG_BOARD_QEMU_CORTEX_R5`	Cortex-R5 Emulation (QEMU)
`CONFIG_BOARD_QEMU_LEON3`	QEMU LEON3 target
`CONFIG_BOARD_QEMU_NIOS2`	QEMU NIOS II target
`CONFIG_BOARD_QEMU_RISCV32`	QEMU RISCV32 target
`CONFIG_BOARD_QEMU_RISCV32_XIP`	QEMU RISCV32 XIP target
`CONFIG_BOARD_QEMU_RISCV64`	QEMU RISCV64 target
`CONFIG_BOARD_QEMU_X86`	QEMU x86
`CONFIG_BOARD_QEMU_X86_64`	QEMU x86_64
`CONFIG_BOARD_QEMU_X86_LAKEMONT`	QEMU x86 (Lakemont)
`CONFIG_BOARD_QEMU_XTENSA`	Xtensa emulation using QEMU
`CONFIG_BOARD_QUICK_FEATHER`	QuickLogic Quick Feather target
`CONFIG_BOARD_RAK4631_NRF52840`	RAK4631 DK NRF52840
`CONFIG_BOARD_RAK5010_NRF52840`	RAK5010 DK NRF52840
`CONFIG_BOARD_RCAR_H3ULCB_CR7`	Cortex-R7 for Renesas H3ULCB
`CONFIG_BOARD_REEL_BOARD`	reel board equipped with GDEH0213B1 display
`CONFIG_BOARD_REEL_BOARD_V2`	reel board equipped with GDEH0213B72 display
`CONFIG_BOARD_RONOTH_LODEV`	Ronoth LoDev
`CONFIG_BOARD_RUUVI_RUUVITAG`	Ruuvi-RuuviTag
`CONFIG_BOARD_RV32M1_VEGA`	RV32M1 RISC-V cores
`CONFIG_BOARD_SAM4E_XPRO`	Atmel SAM4E Xplained Pro
`CONFIG_BOARD_SAM4L_EK`	Atmel SAM4L-EK
`CONFIG_BOARD_SAM4S_XPLAINED`	Atmel SAM4S Xplained
`CONFIG_BOARD_SAM_E70_XPLAINED`	Atmel SMART SAM E70 Xplained Board
`CONFIG_BOARD_SAM_V71_XULT`	Atmel SMART SAM V71 Xplained Ultra Board
`CONFIG_BOARD_SEEEDUINO_XIAO`	Seeeduino XIAO
`CONFIG_BOARD_SEGGER_TRB_STM32F407`	SEGGER STM32F407 Trace Reference Board
`CONFIG_BOARD_SELECT_SIM_EXTERNAL`	Use external SIM
`CONFIG_BOARD_SENSORTILE_BOX`	SensorTile.box Development Board
`CONFIG_BOARD_SERPENTE`	Serpente
`CONFIG_BOARD_SPARKFUN_THING_PLUS_NRF9160`	Sparkfun nRF9160 Thing Plus
`CONFIG_BOARD_SPARKFUN_THING_PLUS_NRF9160_NS`	Sparkfun nRF9160 Thing Plus non-secure
`CONFIG_BOARD_STEVAL_FCU001V1`	STM32 Flight Controller Unit
`CONFIG_BOARD_STM3210C_EVAL`	STM3210C-EVAL Evaluation Board
`CONFIG_BOARD_STM32373C_EVAL`	STM32373C_EVAL Evaluation Board
`CONFIG_BOARD_STM32F030_DEMO`	STM32F030 DEMO Board
`CONFIG_BOARD_STM32F072B_DISCO`	STM32F072B-DISCO Development Board
`CONFIG_BOARD_STM32F072_EVAL`	STM32F072-EVAL Development Board
`CONFIG_BOARD_STM32F0_DISCO`	STM32F0DISCOVERY Development Board
`CONFIG_BOARD_STM32F103_MINI`	STM32F103RCT6 Mini Board
`CONFIG_BOARD_STM32F3_DISCO`	STM32F3DISCOVERY Development Board
`CONFIG_BOARD_STM32F411E_DISCO`	STM32F411E-DISCO Development Board
`CONFIG_BOARD_STM32F412G_DISCO`	STM32F412G-DISCO Development Board
`CONFIG_BOARD_STM32F429I_DISC1`	STM32F429I-DISC1 Development Board
`CONFIG_BOARD_STM32F469I_DISCO`	STM32F469I-DISCO Development Board
`CONFIG_BOARD_STM32F4_DISCO`	STM32F4DISCOVERY Development Board
`CONFIG_BOARD_STM32F723E_DISCO`	STM32F723E Discovery Development Board
`CONFIG_BOARD_STM32F746G_DISCO`	STM32F746G Discovery Development Board
`CONFIG_BOARD_STM32F769I_DISCO`	STM32F769I Discovery Development Board
`CONFIG_BOARD_STM32G0316_DISCO`	STM32G0316 Discovery Development Board
`CONFIG_BOARD_STM32G071B_DISCO`	STM32G071B Discovery Board
`CONFIG_BOARD_STM32H735G_DISCO`	STM32H735G Discovery Development Board
`CONFIG_BOARD_STM32H747I_DISCO_M4`	STM32H747I Discovery Development Board
`CONFIG_BOARD_STM32H747I_DISCO_M7`	STM32H747I Discovery Development Board
`CONFIG_BOARD_STM32L1_DISCO`	STM32L1DISCOVERY Development Board
`CONFIG_BOARD_STM32L476G_DISCO`	STM32L476G Discovery Development Board
`CONFIG_BOARD_STM32L496G_DISCO`	STM32L496G Discovery Development Board
`CONFIG_BOARD_STM32L562E_DK`	STM32L562E-DK Discovery Development Board
`CONFIG_BOARD_STM32MP157C_DK2`	STM32MP157C Discovery Development 2 Board
`CONFIG_BOARD_STM32VL_DISCO`	STM32VLDISCOVERY Development Board
`CONFIG_BOARD_STM32_MIN_DEV_BLACK`	STM32 Minimum Development Board (Black)
`CONFIG_BOARD_STM32_MIN_DEV_BLUE`	STM32 Minimum Development Board (Blue)
`CONFIG_BOARD_TEENSY40`	PJRC TEENSY40
`CONFIG_BOARD_TEENSY41`	PJRC TEENSY41
`CONFIG_BOARD_THINGY52_NRF52832`	Thingy52 NRF52832
`CONFIG_BOARD_THINGY53_NRF5340_CPUAPP`	Thingy53 nRF5340 Application MCU
`CONFIG_BOARD_THINGY53_NRF5340_CPUAPP_NS`	Thingy53 nRF5340 Application MCU non-secure
`CONFIG_BOARD_THINGY53_NRF5340_CPUNET`	Thingy53 nRF5340 Network MCU
`CONFIG_BOARD_THINGY91_NRF9160_NS`
`CONFIG_BOARD_TLSR9518ADK80D`	Telink B91 Platform
`CONFIG_BOARD_TWR_KE18F`	NXP TWR-KE18F
`CONFIG_BOARD_TWR_KE18F_FLEXIO_CLKOUT`	Enable CLKOUT signal on FlexIO header
`CONFIG_BOARD_TWR_KE18F_SPI_0_PCS2`	Use PTE6 as dedicated SPI_0 PCS2 chip select
`CONFIG_BOARD_TWR_KE18F_SPI_1_PCS0`	Use PTD3 as dedicated SPI_1 PCS0 chip select
`CONFIG_BOARD_TWR_KE18F_SPI_1_PCS2`	Use PTA16 as dedicated SPI_1 PCS2 chip select
`CONFIG_BOARD_TWR_KV58F220M`	NXP TWR-KV58F220M
`CONFIG_BOARD_UBX_BMD300EVAL_NRF52832`	u-blox BMD-300-EVAL
`CONFIG_BOARD_UBX_BMD330EVAL_NRF52810`	u-blox BMD-330-EVAL
`CONFIG_BOARD_UBX_BMD340EVAL_NRF52840`	u-blox BMD-340-EVAL
`CONFIG_BOARD_UBX_BMD345EVAL_NRF52840`	u-blox BMD-345-EVAL
`CONFIG_BOARD_UBX_BMD360EVAL_NRF52811`	u-blox BMD-360-EVAL
`CONFIG_BOARD_UBX_BMD380EVAL_NRF52840`	u-blox BMD-380-EVAL
`CONFIG_BOARD_UBX_EVKANNAB1_NRF52832`	u-blox EVK-ANNA-B1
`CONFIG_BOARD_UBX_EVKNINAB1_NRF52832`	u-blox EVK-NINA-B1
`CONFIG_BOARD_UBX_EVKNINAB3_NRF52840`	u-blox EVK-NINA-B3
`CONFIG_BOARD_UBX_EVKNINAB4_NRF52833`	u-blox EVK-NINA-B4
`CONFIG_BOARD_UDOO_NEO_FULL_M4`	UDOO Neo Full
`CONFIG_BOARD_UP_SQUARED`	UP Squared (x86_64)
`CONFIG_BOARD_USB_KW24D512`	NXP USB-KW24D512
`CONFIG_BOARD_V2M_BEETLE`	ARM V2M Beetle Board
`CONFIG_BOARD_VALKYRIE_BCM958401M2`	Broadcom Valkyrie BCM958401M2
`CONFIG_BOARD_VDD_PWR_CTRL_INIT_PRIORITY`	VDD power rail init priority
`CONFIG_BOARD_WARP7_M4`	WaRP7 iMX7 Solo
`CONFIG_BOARD_WAVESHARE_OPEN103Z`	Waveshare OPEN103Z Development Board
`CONFIG_BOARD_XENVM`	Xen Virtual Machine
`CONFIG_BOARD_XMC45_RELAX_KIT`	Infineon Relax Kit
`CONFIG_BOARD_XT_SIM`	Xtensa Development ISS
`CONFIG_BOARD_XT_SIM_INTEL_S1000`	Xtensa Development ISS
`CONFIG_BOOTLOADER_BOSSA`	BOSSA bootloader support
`CONFIG_BOOTLOADER_BOSSA_ADAFRUIT_UF2`	Adafruit UF2
`CONFIG_BOOTLOADER_BOSSA_ARDUINO`	Arduino
`CONFIG_BOOTLOADER_BOSSA_DEVICE_NAME`	BOSSA CDC ACM device name
`CONFIG_BOOTLOADER_BOSSA_LEGACY`	Legacy
`CONFIG_BOOTLOADER_ESP_IDF`	Use esp-idf 2nd stage bootloader
`CONFIG_BOOTLOADER_MCUBOOT`	MCUboot bootloader support
`CONFIG_BOOTLOADER_SRAM_SIZE`	SRAM reserved for bootloader
`CONFIG_BOOT_BANNER`	Boot banner
`CONFIG_BOOT_DELAY`	Boot delay in milliseconds
`CONFIG_BOOT_FLEXSPI_NAND`	FlexSPI serial NAND
`CONFIG_BOOT_FLEXSPI_NOR`	FlexSPI serial NOR
`CONFIG_BOOT_IMAGE_ACCESS_HOOKS`
`CONFIG_BOOT_IMAGE_ACCESS_HOOKS_FILE`
`CONFIG_BOOT_SEMC_NAND`	SEMC parallel NAND
`CONFIG_BOOT_SEMC_NOR`	SEMC parallel NOR
`CONFIG_BOOT_SIGNATURE_KEY_FILE`	MCUBoot PEM key file
`CONFIG_BOOT_UPGRADE_ONLY`
`CONFIG_BOUNDS_CHECK_BYPASS_MITIGATION`	Enable bounds check bypass mitigations for speculative execution
`CONFIG_BQ274XX`	BQ274xx Fuel Gauge
`CONFIG_BQ274XX_LAZY_CONFIGURE`	Configure on first usage instead of init
`CONFIG_BSD_LIBRARY`	Enable BSD Library
`CONFIG_BSD_LIBRARY_SYS_INIT`	Initialize during SYS_INIT
`CONFIG_BSD_LIBRARY_TRACE_ENABLED`	Enable proprietary traces over UART
`CONFIG_BT`	Bluetooth
`CONFIG_BT_A2DP`	Bluetooth A2DP Profile [EXPERIMENTAL]
`CONFIG_BT_AICS`
`CONFIG_BT_AICS_CLIENT`
`CONFIG_BT_AICS_CLIENT_MAX_INSTANCE_COUNT`	Audio Input Control Service client max instance count
`CONFIG_BT_AICS_MAX_INPUT_DESCRIPTION_SIZE`	Audio Input Control Service max input description size
`CONFIG_BT_AICS_MAX_INSTANCE_COUNT`	Audio Input Control Service max instance count
`CONFIG_BT_ALEXA_GADGETS`	Alexa Gadgets service
`CONFIG_BT_ALEXA_GADGETS_AMAZON_ID`	Alexa Gadget Amazon ID
`CONFIG_BT_ALEXA_GADGETS_CAPABILITY_ALERTS`	Enable Alerts capability
`CONFIG_BT_ALEXA_GADGETS_CAPABILITY_CUSTOM`	Enable Custom capability
`CONFIG_BT_ALEXA_GADGETS_CAPABILITY_CUSTOM_NAMESPACE`	Set Custom capability interface name
`CONFIG_BT_ALEXA_GADGETS_CAPABILITY_MUSICDATA`	Enable MusicData capability
`CONFIG_BT_ALEXA_GADGETS_CAPABILITY_NOTIFICATIONS`	Enable Notifications capability
`CONFIG_BT_ALEXA_GADGETS_CAPABILITY_SPEECHDATA`	Enable SpeechData capability
`CONFIG_BT_ALEXA_GADGETS_CAPABILITY_STATELISTENER`	Enable StateListener capability
`CONFIG_BT_ALEXA_GADGETS_DEVICE_DESCRIPTION`	Alexa Gadget device description
`CONFIG_BT_ALEXA_GADGETS_DEVICE_SECRET`	Alexa Gadget device secret
`CONFIG_BT_ALEXA_GADGETS_LOG_LEVEL`
`CONFIG_BT_ALEXA_GADGETS_LOG_LEVEL_DBG`	Debug
`CONFIG_BT_ALEXA_GADGETS_LOG_LEVEL_ERR`	Error
`CONFIG_BT_ALEXA_GADGETS_LOG_LEVEL_INF`	Info
`CONFIG_BT_ALEXA_GADGETS_LOG_LEVEL_OFF`	Off
`CONFIG_BT_ALEXA_GADGETS_LOG_LEVEL_WRN`	Warning
`CONFIG_BT_ALEXA_GADGETS_MODEL_NAME`	Alexa Gadget device model name
`CONFIG_BT_ALEXA_GADGETS_OTA`	Enable Alexa Gadgets OTA protocol
`CONFIG_BT_ALEXA_GADGETS_PROFILE`	Enable Alexa Gadgets profile
`CONFIG_BT_ALEXA_GADGETS_PROFILE_LOG_LEVEL`
`CONFIG_BT_ALEXA_GADGETS_PROFILE_LOG_LEVEL_DBG`	Debug
`CONFIG_BT_ALEXA_GADGETS_PROFILE_LOG_LEVEL_ERR`	Error
`CONFIG_BT_ALEXA_GADGETS_PROFILE_LOG_LEVEL_INF`	Info
`CONFIG_BT_ALEXA_GADGETS_PROFILE_LOG_LEVEL_OFF`	Off
`CONFIG_BT_ALEXA_GADGETS_PROFILE_LOG_LEVEL_WRN`	Warning
`CONFIG_BT_ALEXA_GADGETS_TRANSACTION_BUF_SIZE`	Alexa Gadgets maximum transaction size
`CONFIG_BT_ANCS_CLIENT`	Apple Notification Center Service client
`CONFIG_BT_ANCS_CLIENT_CP_BUFF_SIZE`	Control Point transmit buffer size
`CONFIG_BT_ANCS_CLIENT_LOG_LEVEL`
`CONFIG_BT_ANCS_CLIENT_LOG_LEVEL_DBG`	Debug
`CONFIG_BT_ANCS_CLIENT_LOG_LEVEL_ERR`	Error
`CONFIG_BT_ANCS_CLIENT_LOG_LEVEL_INF`	Info
`CONFIG_BT_ANCS_CLIENT_LOG_LEVEL_OFF`	Off
`CONFIG_BT_ANCS_CLIENT_LOG_LEVEL_WRN`	Warning
`CONFIG_BT_ASSERT`	Custom Bluetooth assert implementation
`CONFIG_BT_ASSERT_PANIC`	Use k_panic() instead of k_oops()
`CONFIG_BT_ASSERT_VERBOSE`	Print out an assert string when using BT_ASSERT
`CONFIG_BT_ATT_ENFORCE_FLOW`	Enforce strict flow control semantics for incoming PDUs
`CONFIG_BT_ATT_PREPARE_COUNT`	Number of ATT prepare write buffers
`CONFIG_BT_AUDIO`	Bluetooth Audio support [Experimental]
`CONFIG_BT_AUDIO_BROADCAST`	Bluetooth Broadcast Audio Support
`CONFIG_BT_AUDIO_DEBUG`	Enable debug logs
`CONFIG_BT_AUDIO_UNICAST`	Bluetooth Unicast Audio Support
`CONFIG_BT_AUTO_DATA_LEN_UPDATE`	Auto-initiate Data Length Update procedure
`CONFIG_BT_AUTO_PHY_UPDATE`	Auto-initiate PHY Update Procedure
`CONFIG_BT_AVDTP`	Bluetooth AVDTP protocol support [EXPERIMENTAL]
`CONFIG_BT_BACKGROUND_SCAN_INTERVAL`	Scan interval used for background scanning in 0.625 ms units
`CONFIG_BT_BACKGROUND_SCAN_WINDOW`	Scan window used for background scanning in 0.625 ms units
`CONFIG_BT_BAS`	Enable GATT Battery service
`CONFIG_BT_BAS_CLIENT`	Battery service client
`CONFIG_BT_BAS_CLIENT_LOG_LEVEL`
`CONFIG_BT_BAS_CLIENT_LOG_LEVEL_DBG`	Debug
`CONFIG_BT_BAS_CLIENT_LOG_LEVEL_ERR`	Error
`CONFIG_BT_BAS_CLIENT_LOG_LEVEL_INF`	Info
`CONFIG_BT_BAS_CLIENT_LOG_LEVEL_OFF`	Off
`CONFIG_BT_BAS_CLIENT_LOG_LEVEL_WRN`	Warning
`CONFIG_BT_BAS_LOG_LEVEL`	Battery service log level
`CONFIG_BT_BLUENRG_ACI`	Enable ACI message with with BlueNRG-based devices
`CONFIG_BT_BMS`	Bond Management Service
`CONFIG_BT_BMS_LOG_LEVEL`
`CONFIG_BT_BMS_LOG_LEVEL_DBG`	Debug
`CONFIG_BT_BMS_LOG_LEVEL_ERR`	Error
`CONFIG_BT_BMS_LOG_LEVEL_INF`	Info
`CONFIG_BT_BMS_LOG_LEVEL_OFF`	Off
`CONFIG_BT_BMS_LOG_LEVEL_WRN`	Warning
`CONFIG_BT_BONDABLE`	Bondable Mode
`CONFIG_BT_BONDING_REQUIRED`	Always require bonding
`CONFIG_BT_BREDR`	Bluetooth BR/EDR support [EXPERIMENTAL]
`CONFIG_BT_BROADCASTER`	Broadcaster Role support
`CONFIG_BT_BUF_ACL_RX_COUNT`	Number of incoming ACL data buffers
`CONFIG_BT_BUF_ACL_RX_SIZE`	Maximum supported ACL size for incoming data
`CONFIG_BT_BUF_ACL_TX_COUNT`	Number of outgoing ACL data buffers
`CONFIG_BT_BUF_ACL_TX_SIZE`	Maximum supported ACL size for outgoing data
`CONFIG_BT_BUF_CMD_TX_COUNT`	Number of HCI command buffers
`CONFIG_BT_BUF_CMD_TX_SIZE`	Maximum support HCI Command buffer length
`CONFIG_BT_BUF_EVT_DISCARDABLE_COUNT`	Number of discardable HCI Event buffers
`CONFIG_BT_BUF_EVT_DISCARDABLE_SIZE`	Maximum supported discardable HCI Event buffer length
`CONFIG_BT_BUF_EVT_RX_COUNT`	Number of HCI Event buffers
`CONFIG_BT_BUF_EVT_RX_SIZE`	Maximum supported HCI Event buffer length
`CONFIG_BT_CENTRAL`	Central Role support
`CONFIG_BT_COMPANY_ID`	Company Id
`CONFIG_BT_CONN`
`CONFIG_BT_CONN_CTX`	Connection context library
`CONFIG_BT_CONN_CTX_LOG_LEVEL`
`CONFIG_BT_CONN_CTX_LOG_LEVEL_DBG`	Debug
`CONFIG_BT_CONN_CTX_LOG_LEVEL_ERR`	Error
`CONFIG_BT_CONN_CTX_LOG_LEVEL_INF`	Info
`CONFIG_BT_CONN_CTX_LOG_LEVEL_OFF`	Off
`CONFIG_BT_CONN_CTX_LOG_LEVEL_WRN`	Warning
`CONFIG_BT_CONN_CTX_MEM_BUF_ALIGN`	Memory slab buffer alignment
`CONFIG_BT_CONN_DISABLE_SECURITY`	Disable security
`CONFIG_BT_CONN_PARAM_UPDATE_TIMEOUT`	Peripheral connection parameter update timeout in milliseconds
`CONFIG_BT_CONN_TX_MAX`	Maximum number of pending TX buffers with a callback
`CONFIG_BT_CREATE_CONN_TIMEOUT`	Timeout for pending LE Create Connection command in seconds
`CONFIG_BT_CTLR`	Bluetooth Controller
`CONFIG_BT_CTLR_ADVANCED_FEATURES`	Show advanced features
`CONFIG_BT_CTLR_ADV_AUX_SET`	LE Extended Advertising Auxiliary Sets
`CONFIG_BT_CTLR_ADV_DATA_BUF_MAX`	Advertising Data Maximum Buffers
`CONFIG_BT_CTLR_ADV_DATA_LEN_MAX`	Maximum Advertising Data Length
`CONFIG_BT_CTLR_ADV_EXT`	LE Advertising Extensions
`CONFIG_BT_CTLR_ADV_EXT_PDU_EXTRA_DATA_MEMORY`
`CONFIG_BT_CTLR_ADV_EXT_SUPPORT`
`CONFIG_BT_CTLR_ADV_INDICATION`	Advertisement indications
`CONFIG_BT_CTLR_ADV_ISO`	LE Broadcast Isochronous Channel advertising
`CONFIG_BT_CTLR_ADV_ISO_PDU_LEN_MAX`	Maximum Broadcast Isochronous Channel PDU Length
`CONFIG_BT_CTLR_ADV_ISO_SET`	LE Isochronous Channel advertising sets
`CONFIG_BT_CTLR_ADV_ISO_SUPPORT`
`CONFIG_BT_CTLR_ADV_PDU_LINK`	Enable linking of advertising PDU trains
`CONFIG_BT_CTLR_ADV_PERIODIC`	LE Periodic Advertising in Advertising State
`CONFIG_BT_CTLR_ADV_PERIODIC_SUPPORT`
`CONFIG_BT_CTLR_ADV_SET`	LE Advertising Extensions Sets
`CONFIG_BT_CTLR_ADV_SYNC_PDU_BACK2BACK`	Enable back-to-back transmission of periodic advertising trains
`CONFIG_BT_CTLR_ADV_SYNC_PDU_BACK2BACK_AFS`	AUX Frame Space for back-to-back transmission of periodic advertising trains
`CONFIG_BT_CTLR_ADV_SYNC_SET`	LE Periodic Advertising Sets
`CONFIG_BT_CTLR_AD_DATA_BACKUP`	Enable Legacy AD Data backup
`CONFIG_BT_CTLR_ALLOW_SAME_PEER_CONN`	Allow connection requests from same peer
`CONFIG_BT_CTLR_ASSERT_HANDLER`	Application Defined Assertion Handler
`CONFIG_BT_CTLR_BROADCAST_ISO`
`CONFIG_BT_CTLR_CENTRAL_ISO`	LE Connected Isochronous Stream Central
`CONFIG_BT_CTLR_CENTRAL_ISO_SUPPORT`
`CONFIG_BT_CTLR_CHAN_SEL_2`	Channel Selection Algorithm #2
`CONFIG_BT_CTLR_CHAN_SEL_2_SUPPORT`
`CONFIG_BT_CTLR_CHECK_SAME_PEER_CONN`
`CONFIG_BT_CTLR_COMPANY_ID`	Controller Company Id
`CONFIG_BT_CTLR_CONN_ISO`
`CONFIG_BT_CTLR_CONN_ISO_GROUPS`	LE Connected Isochronous Groups
`CONFIG_BT_CTLR_CONN_ISO_STREAMS`	LE Connected Isochronous Streams
`CONFIG_BT_CTLR_CONN_ISO_STREAMS_PER_GROUP`	LE Connected Isochronous Streams per Group
`CONFIG_BT_CTLR_CONN_META`	Enable connection meta data extension
`CONFIG_BT_CTLR_CONN_PARAM_REQ`	Connection Parameter Request
`CONFIG_BT_CTLR_CONN_PARAM_REQ_SUPPORT`
`CONFIG_BT_CTLR_CONN_RANDOM_FORCE`	Enable random forced scheduling for peripheral on missed anchor point
`CONFIG_BT_CTLR_CONN_RSSI`	Connection RSSI
`CONFIG_BT_CTLR_CONN_RSSI_EVENT`	Connection RSSI event
`CONFIG_BT_CTLR_CONN_RSSI_SUPPORT`
`CONFIG_BT_CTLR_CRYPTO`	Enable crypto functions in Controller
`CONFIG_BT_CTLR_CSN_GPIOTE_CHAN`
`CONFIG_BT_CTLR_DATA_LENGTH`
`CONFIG_BT_CTLR_DATA_LENGTH_CLEAR`	Data Length Support (Cleartext only)
`CONFIG_BT_CTLR_DATA_LENGTH_MAX`	Maximum data length supported
`CONFIG_BT_CTLR_DATA_LEN_UPDATE_SUPPORT`
`CONFIG_BT_CTLR_DEBUG_PINS`	Bluetooth Controller Debug Pins
`CONFIG_BT_CTLR_DEBUG_PINS_CPUAPP`	Bluetooth Controller Debug Pins
`CONFIG_BT_CTLR_DF`	LE Direction Finding [Experimental]
`CONFIG_BT_CTLR_DF_ADV_CTE_TX`	Enable Connectionless CTE Transmitter feature
`CONFIG_BT_CTLR_DF_ANT_SWITCH_1US`	Enable support for 1us antenna switch slots
`CONFIG_BT_CTLR_DF_ANT_SWITCH_1US_SUPPORT`
`CONFIG_BT_CTLR_DF_ANT_SWITCH_2US_SUPPORT`
`CONFIG_BT_CTLR_DF_ANT_SWITCH_RX`	Enable antenna switching during CTE reception (AoA) feature
`CONFIG_BT_CTLR_DF_ANT_SWITCH_TX`	Enable antenna switching during CTE transmission (AoD) feature
`CONFIG_BT_CTLR_DF_CONN_CTE_RSP`	Enable Connection CTE Response feature
`CONFIG_BT_CTLR_DF_CTE_RX`	Enable reception of Constant Tone Extension feature
`CONFIG_BT_CTLR_DF_CTE_RX_SAMPLE_1US`	Enable reception of CTE with 1us sampling slots
`CONFIG_BT_CTLR_DF_CTE_RX_SAMPLE_1US_SUPPORT`
`CONFIG_BT_CTLR_DF_CTE_RX_SUPPORT`
`CONFIG_BT_CTLR_DF_CTE_TX`	Enable transmission of Constant Tone Extension
`CONFIG_BT_CTLR_DF_CTE_TX_SUPPORT`
`CONFIG_BT_CTLR_DF_DEBUG_ENABLE`	Bluetooth Direction Finding debug support enable
`CONFIG_BT_CTLR_DF_INIT_ANT_SEL_GPIOS`	Enable initialization of GPIOs responsible for antenna switching
`CONFIG_BT_CTLR_DF_MAX_ANT_SW_PATTERN_LEN`	Maximum length of antenna switch pattern
`CONFIG_BT_CTLR_DF_SAMPLE_CTE_FOR_PDU_WITH_BAD_CRC`	Enable sampling of CTE for PDUs with bad CRC
`CONFIG_BT_CTLR_DF_SCAN_CTE_RX`	Enable Connectionless CTE Receiver
`CONFIG_BT_CTLR_DF_SUPPORT`
`CONFIG_BT_CTLR_DTM`
`CONFIG_BT_CTLR_DTM_HCI`	Direct Test Mode over HCI
`CONFIG_BT_CTLR_DTM_HCI_SUPPORT`
`CONFIG_BT_CTLR_DUP_FILTER_LEN`	Number of addresses in the scan duplicate filter
`CONFIG_BT_CTLR_ECDH`	Elliptic Curve Diffie-Hellman (ECDH)
`CONFIG_BT_CTLR_ECDH_SUPPORT`
`CONFIG_BT_CTLR_EXT_REJ_IND`	Extended Reject Indication
`CONFIG_BT_CTLR_EXT_REJ_IND_SUPPORT`
`CONFIG_BT_CTLR_EXT_SCAN_FP`	LE Extended Scanner Filter Policies
`CONFIG_BT_CTLR_EXT_SCAN_FP_SUPPORT`
`CONFIG_BT_CTLR_FAST_ENC`	Fast Encryption Setup
`CONFIG_BT_CTLR_FEM_NRF21540`	nRF21540 GPIO interface
`CONFIG_BT_CTLR_FILTER`	Device Whitelist Support
`CONFIG_BT_CTLR_FORCE_MD_AUTO`	Forced MD bit automatic calculation
`CONFIG_BT_CTLR_FORCE_MD_COUNT`	Forced MD bit count
`CONFIG_BT_CTLR_GPIO_CSN_PIN`	FEM CSN pin number
`CONFIG_BT_CTLR_GPIO_CSN_POL_INV`	Inverted polarity for the CSN pin
`CONFIG_BT_CTLR_GPIO_LNA`	Low Noise Amplifier GPIO interface
`CONFIG_BT_CTLR_GPIO_LNA_OFFSET`	Time from LNA ON to Rx ready
`CONFIG_BT_CTLR_GPIO_LNA_PIN`	Low Noise Amplifier GPIO pin number
`CONFIG_BT_CTLR_GPIO_LNA_POL_INV`	Inverted polarity for the LNA pin
`CONFIG_BT_CTLR_GPIO_PA`	Power Amplifier GPIO interface
`CONFIG_BT_CTLR_GPIO_PA_OFFSET`	Time from PA ON to Tx ready
`CONFIG_BT_CTLR_GPIO_PA_PIN`	Power Amplifier GPIO pin number
`CONFIG_BT_CTLR_GPIO_PA_POL_INV`	Inverted polarity for the PA pin
`CONFIG_BT_CTLR_GPIO_PDN_CSN_OFFSET`	Time from PDN and CSN toggle to PA/LNA pin toggle
`CONFIG_BT_CTLR_GPIO_PDN_PIN`	FEM PDN pin number
`CONFIG_BT_CTLR_GPIO_PDN_POL_INV`	Inverted polarity for the PDN pin
`CONFIG_BT_CTLR_HCI_ADV_HANDLE_MAPPING`	Enable advertising set handle mapping between HCI and LL
`CONFIG_BT_CTLR_HCI_CODEC_AND_DELAY_INFO`	Codecs and controller delay information commands
`CONFIG_BT_CTLR_HCI_VS_BUILD_INFO`	Zephyr HCI VS Build Info string
`CONFIG_BT_CTLR_ISO`
`CONFIG_BT_CTLR_ISO_TX_BUFFERS`	Number of Isochronous Tx buffers
`CONFIG_BT_CTLR_ISO_TX_BUFFER_SIZE`	Isochronous Tx buffer size
`CONFIG_BT_CTLR_JIT_SCHEDULING`	Just-in-Time Scheduling
`CONFIG_BT_CTLR_LE_ENC`	LE Encryption
`CONFIG_BT_CTLR_LE_ENC_SUPPORT`
`CONFIG_BT_CTLR_LE_PING`	LE Ping
`CONFIG_BT_CTLR_LLCP_CONN`	Number of connections with worst-case overlapping procedures
`CONFIG_BT_CTLR_LLID_DATA_START_EMPTY`	Handle zero length L2CAP start frame
`CONFIG_BT_CTLR_LLL_PRIO`	Lower Link Layer (Radio) IRQ priority
`CONFIG_BT_CTLR_LLPM`	Enable Low Latency Packet Mode support
`CONFIG_BT_CTLR_LOW_LAT`	Low latency non-negotiating event preemption
`CONFIG_BT_CTLR_LOW_LAT_ULL`	Low latency ULL
`CONFIG_BT_CTLR_LOW_LAT_ULL_DONE`	Low latency ULL prepare dequeue
`CONFIG_BT_CTLR_MESH_SCAN_FILTERS`	Number of Mesh scan filters
`CONFIG_BT_CTLR_MESH_SF_PATTERNS`	Number of Mesh scan filter patterns
`CONFIG_BT_CTLR_MIN_USED_CHAN`	Minimum Number of Used Channels
`CONFIG_BT_CTLR_MIN_USED_CHAN_SUPPORT`
`CONFIG_BT_CTLR_OPTIMIZE_FOR_SPEED`	Optimize for Speed
`CONFIG_BT_CTLR_PARAM_CHECK`	Enable HCI Command Parameter checking
`CONFIG_BT_CTLR_PA_LNA_GPIOTE_CHAN`
`CONFIG_BT_CTLR_PDN_GPIOTE_CHAN`
`CONFIG_BT_CTLR_PERIPHERAL_ISO`	LE Connected Isochronous Stream Peripheral
`CONFIG_BT_CTLR_PERIPHERAL_ISO_SUPPORT`
`CONFIG_BT_CTLR_PHY`
`CONFIG_BT_CTLR_PHY_2M`	2Mbps PHY Support
`CONFIG_BT_CTLR_PHY_2M_NRF`	2Mbps Nordic Semiconductor PHY Support (Cleartext only)
`CONFIG_BT_CTLR_PHY_2M_SUPPORT`
`CONFIG_BT_CTLR_PHY_CODED`	Coded PHY Support
`CONFIG_BT_CTLR_PHY_CODED_SUPPORT`
`CONFIG_BT_CTLR_PHY_UPDATE_SUPPORT`
`CONFIG_BT_CTLR_PRIVACY`	LE Controller-based Privacy
`CONFIG_BT_CTLR_PRIVACY_SUPPORT`
`CONFIG_BT_CTLR_PROFILE_ISR`	Profile radio ISR
`CONFIG_BT_CTLR_RADIO_ENABLE_FAST`	Use tTXEN/RXEN,FAST ramp-up
`CONFIG_BT_CTLR_RL_SIZE`	LE Controller-based Privacy Resolving List size
`CONFIG_BT_CTLR_RPA_CACHE_SIZE`	LE Controller-based Software Privacy Resolving List size
`CONFIG_BT_CTLR_RX_BUFFERS`	Number of Rx buffers
`CONFIG_BT_CTLR_RX_ENQUEUE_HOLD`	Procedure Complete after on-air instant
`CONFIG_BT_CTLR_RX_PDU_META`	Enable RX pdu meta data
`CONFIG_BT_CTLR_RX_PRIO_STACK_SIZE`	High priority Rx thread stack size
`CONFIG_BT_CTLR_SCAN_AUX_SET`	LE Extended Scanning Auxiliary Sets
`CONFIG_BT_CTLR_SCAN_ENABLE_STRICT`	Enforce Strict Scan Enable/Disable
`CONFIG_BT_CTLR_SCAN_INDICATION`	Scanner indications
`CONFIG_BT_CTLR_SCAN_REQ_NOTIFY`	Scan Request Notifications
`CONFIG_BT_CTLR_SCAN_REQ_RSSI`	Measure Scan Request RSSI
`CONFIG_BT_CTLR_SCAN_SYNC_ISO_SET`	LE ISO Broadcast Isochronous Groups Sync Sets
`CONFIG_BT_CTLR_SCAN_UNRESERVED`	Unreserved scan window
`CONFIG_BT_CTLR_SCHED_ADVANCED`	Advanced scheduling
`CONFIG_BT_CTLR_SCHED_ADVANCED_SUPPORT`
`CONFIG_BT_CTLR_SETTINGS`	Settings System
`CONFIG_BT_CTLR_SET_HOST_FEATURE`	LE Set Host Feature Command [EXPERIMENTAL]
`CONFIG_BT_CTLR_SLAVE_FEAT_REQ`	Slave-initiated Features Exchange
`CONFIG_BT_CTLR_SLAVE_FEAT_REQ_SUPPORT`
`CONFIG_BT_CTLR_SMI_RX`	Stable modulation index - Receiver
`CONFIG_BT_CTLR_SMI_SUPPORT`
`CONFIG_BT_CTLR_SMI_TX`	Stable modulation index - Transmitter
`CONFIG_BT_CTLR_SMI_TX_SETTING`	Stable modulation index - Transmitter as setting
`CONFIG_BT_CTLR_SUBVERSION_NUMBER`	Subversion Number
`CONFIG_BT_CTLR_SW_DEFERRED_PRIVACY`	LE Controller-based Software Privacy
`CONFIG_BT_CTLR_SW_SWITCH_SINGLE_TIMER`	Single TIMER tIFS Trx SW switching
`CONFIG_BT_CTLR_SYNC_ISO`	LE Broadcast Isochronous Channel advertising sync
`CONFIG_BT_CTLR_SYNC_ISO_PDU_LEN_MAX`	Maximum Synchronized Isochronous Channel PDU Length
`CONFIG_BT_CTLR_SYNC_ISO_SUPPORT`
`CONFIG_BT_CTLR_SYNC_PERIODIC`	LE Periodic Advertising in Synchronization State
`CONFIG_BT_CTLR_SYNC_PERIODIC_SUPPORT`
`CONFIG_BT_CTLR_TEST`	Run in-system unit tests
`CONFIG_BT_CTLR_THROUGHPUT`	Measure incoming Tx throughput
`CONFIG_BT_CTLR_TIFS_HW`	H/w Accelerated tIFS Trx switching
`CONFIG_BT_CTLR_TIFS_HW_SUPPORT`
`CONFIG_BT_CTLR_TX_PWR_0`	0 dBm
`CONFIG_BT_CTLR_TX_PWR_DYNAMIC_CONTROL`	Tx Power Dynamic Control
`CONFIG_BT_CTLR_TX_PWR_MINUS_12`	-12 dBm
`CONFIG_BT_CTLR_TX_PWR_MINUS_16`	-16 dBm
`CONFIG_BT_CTLR_TX_PWR_MINUS_20`	-20 dBm
`CONFIG_BT_CTLR_TX_PWR_MINUS_30`	-30 dBm
`CONFIG_BT_CTLR_TX_PWR_MINUS_4`	-4 dBm
`CONFIG_BT_CTLR_TX_PWR_MINUS_40`	-40 dBm
`CONFIG_BT_CTLR_TX_PWR_MINUS_8`	-8 dBm
`CONFIG_BT_CTLR_TX_PWR_PLUS_2`	+2 dBm
`CONFIG_BT_CTLR_TX_PWR_PLUS_3`	+3 dBm
`CONFIG_BT_CTLR_TX_PWR_PLUS_4`	+4 dBm
`CONFIG_BT_CTLR_TX_PWR_PLUS_5`	+5 dBm
`CONFIG_BT_CTLR_TX_PWR_PLUS_6`	+6 dBm
`CONFIG_BT_CTLR_TX_PWR_PLUS_7`	+7 dBm
`CONFIG_BT_CTLR_TX_PWR_PLUS_8`	+8 dBm
`CONFIG_BT_CTLR_TX_RETRY_DISABLE`	Disable Tx Retry
`CONFIG_BT_CTLR_ULL_HIGH_PRIO`	Upper Link Layer High IRQ priority
`CONFIG_BT_CTLR_ULL_LLL_PRIO_SUPPORT`
`CONFIG_BT_CTLR_ULL_LOW_PRIO`	Upper Link Layer Low IRQ priority
`CONFIG_BT_CTLR_USER_CPR_INTERVAL_MIN`	Enable proprietary Connection Parameter Request minimum interval
`CONFIG_BT_CTLR_USER_EVT_RANGE`	Range of event constants reserved for proprietary event types
`CONFIG_BT_CTLR_USER_EXT`	Enable proprietary extensions in Controller
`CONFIG_BT_CTLR_USER_TICKER_ID_RANGE`	Range of ticker id constants reserved for proprietary ticker nodes
`CONFIG_BT_CTLR_VERSION_SETTINGS`	Version Settings
`CONFIG_BT_CTLR_WL_SIZE`	LE Controller-based Privacy White List size
`CONFIG_BT_CTLR_XTAL_ADVANCED`	Advanced event preparation
`CONFIG_BT_CTLR_XTAL_ADVANCED_SUPPORT`
`CONFIG_BT_CTLR_XTAL_THRESHOLD`	Crystal shutdown threshold in uS
`CONFIG_BT_CTLR_ZLI`	Use Zero Latency IRQs
`CONFIG_BT_CTRL_ADV_ADI_IN_SCAN_RSP`	Include ADI in AUX_SCAN_RSP PDU
`CONFIG_BT_CTS_CLIENT`	Current Time Service client
`CONFIG_BT_CTS_CLIENT_LOG_LEVEL`
`CONFIG_BT_CTS_CLIENT_LOG_LEVEL_DBG`	Debug
`CONFIG_BT_CTS_CLIENT_LOG_LEVEL_ERR`	Error
`CONFIG_BT_CTS_CLIENT_LOG_LEVEL_INF`	Info
`CONFIG_BT_CTS_CLIENT_LOG_LEVEL_OFF`	Off
`CONFIG_BT_CTS_CLIENT_LOG_LEVEL_WRN`	Warning
`CONFIG_BT_CUSTOM`	Custom
`CONFIG_BT_DATA_LEN_UPDATE`	Data Length Update
`CONFIG_BT_DEBUG`
`CONFIG_BT_DEBUG_A2DP`	Bluetooth A2DP debug
`CONFIG_BT_DEBUG_AICS`	Audio Input Control Service debug
`CONFIG_BT_DEBUG_AICS_CLIENT`	Audio Input Control Service client debug
`CONFIG_BT_DEBUG_ATT`	Bluetooth Attribute Protocol (ATT) debug
`CONFIG_BT_DEBUG_AVDTP`	Bluetooth AVDTP debug
`CONFIG_BT_DEBUG_CONN`	Bluetooth connection debug
`CONFIG_BT_DEBUG_DF`	Bluetooth Direction Finding debug
`CONFIG_BT_DEBUG_GATT`	Bluetooth Generic Attribute Profile (GATT) debug
`CONFIG_BT_DEBUG_HCI_CORE`	Bluetooth HCI core debug
`CONFIG_BT_DEBUG_HCI_DRIVER`	Bluetooth HCI driver debug
`CONFIG_BT_DEBUG_HFP_HF`	Bluetooth Hands Free Profile (HFP) debug
`CONFIG_BT_DEBUG_ISO`	ISO channel debug
`CONFIG_BT_DEBUG_KEYS`	Bluetooth security keys debug
`CONFIG_BT_DEBUG_L2CAP`	Bluetooth L2CAP debug
`CONFIG_BT_DEBUG_LOG`	Normal printf-style to console
`CONFIG_BT_DEBUG_MICS`	Microphone Input Control Service debug
`CONFIG_BT_DEBUG_MICS_CLIENT`	Microphone Control Profile debug
`CONFIG_BT_DEBUG_MONITOR_RTT`	Monitor protocol over RTT
`CONFIG_BT_DEBUG_MONITOR_RTT_BUFFER`	Buffer number used for custom logger output.
`CONFIG_BT_DEBUG_MONITOR_RTT_BUFFER_NAME`	Buffer name used for custom logger output.
`CONFIG_BT_DEBUG_MONITOR_RTT_BUFFER_SIZE`	Size of reserved up-buffer for custom logger output.
`CONFIG_BT_DEBUG_MONITOR_UART`	Monitor protocol over UART
`CONFIG_BT_DEBUG_NONE`	No debug log
`CONFIG_BT_DEBUG_RFCOMM`	Bluetooth RFCOMM debug
`CONFIG_BT_DEBUG_RPA`	Bluetooth Resolvable Private Address (RPA) debug
`CONFIG_BT_DEBUG_SDP`	Bluetooth Service Discovery Protocol (SDP) debug
`CONFIG_BT_DEBUG_SERVICE`	Bluetooth Services debug
`CONFIG_BT_DEBUG_SETTINGS`	Bluetooth storage debug
`CONFIG_BT_DEBUG_SMP`	Bluetooth Security Manager Protocol (SMP) debug
`CONFIG_BT_DEBUG_VCS`	Volume Control Service debug
`CONFIG_BT_DEBUG_VCS_CLIENT`	Volume Control Profile debug
`CONFIG_BT_DEBUG_VOCS`	Volume Offset Control Service debug
`CONFIG_BT_DEBUG_VOCS_CLIENT`	Volume Offset Control Service client debug
`CONFIG_BT_DEVICE_APPEARANCE`	Bluetooth device appearance
`CONFIG_BT_DEVICE_NAME`	Bluetooth device name
`CONFIG_BT_DEVICE_NAME_DYNAMIC`	Allow to set Bluetooth device name on runtime
`CONFIG_BT_DEVICE_NAME_GATT_WRITABLE`	Allow to write name by remote GATT clients
`CONFIG_BT_DEVICE_NAME_MAX`	Maximum size in bytes for device name
`CONFIG_BT_DF`	Enable Direction Finding support [EXPERIMENTAL]
`CONFIG_BT_DFU_SMP`	DFU SMP service client
`CONFIG_BT_DFU_SMP_LOG_LEVEL`
`CONFIG_BT_DFU_SMP_LOG_LEVEL_DBG`	Debug
`CONFIG_BT_DFU_SMP_LOG_LEVEL_ERR`	Error
`CONFIG_BT_DFU_SMP_LOG_LEVEL_INF`	Info
`CONFIG_BT_DFU_SMP_LOG_LEVEL_OFF`	Off
`CONFIG_BT_DFU_SMP_LOG_LEVEL_WRN`	Warning
`CONFIG_BT_DF_CONNECTIONLESS_CTE_RX`	Enable support for receive of CTE in connectionless mode
`CONFIG_BT_DF_CONNECTION_CTE_RX`	Enable support for receive of CTE in connection mode
`CONFIG_BT_DIS`	Enable GATT Device Information service
`CONFIG_BT_DIS_FW_REV`	Enable DIS Firmware Revision characteristic
`CONFIG_BT_DIS_FW_REV_STR`	Firmware revision
`CONFIG_BT_DIS_HW_REV`	Enable DIS Hardware Revision characteristic
`CONFIG_BT_DIS_HW_REV_STR`	Hardware revision
`CONFIG_BT_DIS_MANUF`	Manufacturer name
`CONFIG_BT_DIS_MODEL`	Model name
`CONFIG_BT_DIS_PNP`	Enable PnP_ID characteristic
`CONFIG_BT_DIS_PNP_PID`	Product ID
`CONFIG_BT_DIS_PNP_VER`	Product Version
`CONFIG_BT_DIS_PNP_VID`	Vendor ID
`CONFIG_BT_DIS_PNP_VID_SRC`	Vendor ID source
`CONFIG_BT_DIS_SERIAL_NUMBER`	Enable DIS Serial number characteristic
`CONFIG_BT_DIS_SERIAL_NUMBER_STR`	Serial Number
`CONFIG_BT_DIS_SETTINGS`	Enable Settings usage in Device Information Service
`CONFIG_BT_DIS_STR_MAX`	Maximum size in bytes for DIS strings
`CONFIG_BT_DIS_SW_REV`	Enable DIS Software Revision characteristic
`CONFIG_BT_DIS_SW_REV_STR`	Software revision
`CONFIG_BT_DRIVER_QUIRK_NO_AUTO_DLE`	Host auto-initiated Data Length Update quirk
`CONFIG_BT_DRIVER_RX_HIGH_PRIO`
`CONFIG_BT_EATT`	Enhanced ATT Bearers support [EXPERIMENTAL]
`CONFIG_BT_EATT_MAX`	Maximum number of Enhanced ATT bearers
`CONFIG_BT_EATT_SEC_LEVEL`	Enhanced ATT bearer security level
`CONFIG_BT_ECC`	Enable ECDH key generation support
`CONFIG_BT_ENOCEAN`	EnOcean library
`CONFIG_BT_ENOCEAN_DEBUG`	Enable debug logs
`CONFIG_BT_ENOCEAN_DEVICES_MAX`	Maximum number of EnOcean devices
`CONFIG_BT_ENOCEAN_STORE`	Store EnOcean device data persistently
`CONFIG_BT_ENOCEAN_STORE_SEQ`	Continuously store the EnOcean sequence number
`CONFIG_BT_ENOCEAN_STORE_TIMEOUT`	Delay (in seconds) before storing EnOcean data persistently
`CONFIG_BT_ESP32`	ESP32 HCI driver
`CONFIG_BT_EXT_ADV`	Extended Advertising and Scanning support
`CONFIG_BT_EXT_ADV_LEGACY_SUPPORT`	Support starting advertising through legacy commands
`CONFIG_BT_EXT_ADV_MAX_ADV_SET`	Maximum number of simultaneous advertising sets
`CONFIG_BT_FIXED_PASSKEY`	Use a fixed passkey for pairing
`CONFIG_BT_GAP_AUTO_UPDATE_CONN_PARAMS`	Automatic Update of Connection Parameters
`CONFIG_BT_GAP_PERIPHERAL_PREF_PARAMS`	Configure peripheral preferred connection parameters
`CONFIG_BT_GATTP`	Generic Attribute Profile
`CONFIG_BT_GATTP_LOG_LEVEL`
`CONFIG_BT_GATTP_LOG_LEVEL_DBG`	Debug
`CONFIG_BT_GATTP_LOG_LEVEL_ERR`	Error
`CONFIG_BT_GATTP_LOG_LEVEL_INF`	Info
`CONFIG_BT_GATTP_LOG_LEVEL_OFF`	Off
`CONFIG_BT_GATTP_LOG_LEVEL_WRN`	Warning
`CONFIG_BT_GATT_AUTO_DISCOVER_CCC`	Support to automatic discover the CCC handles of characteristics
`CONFIG_BT_GATT_AUTO_SEC_REQ`	Automatic security re-establishment request as a peripheral
`CONFIG_BT_GATT_CACHING`	GATT Caching support
`CONFIG_BT_GATT_CHRC_POOL_SIZE`	Number of characteristic descriptors
`CONFIG_BT_GATT_CLIENT`	GATT client support
`CONFIG_BT_GATT_DM`	GATT Discovery Manager library
`CONFIG_BT_GATT_DM_DATA_PRINT`	Enable functions for printing discovery related data
`CONFIG_BT_GATT_DM_LOG_LEVEL`
`CONFIG_BT_GATT_DM_LOG_LEVEL_DBG`	Debug
`CONFIG_BT_GATT_DM_LOG_LEVEL_ERR`	Error
`CONFIG_BT_GATT_DM_LOG_LEVEL_INF`	Info
`CONFIG_BT_GATT_DM_LOG_LEVEL_OFF`	Off
`CONFIG_BT_GATT_DM_LOG_LEVEL_WRN`	Warning
`CONFIG_BT_GATT_DM_MAX_ATTRS`	Maximum number of attributes that can be present in the discovered service
`CONFIG_BT_GATT_DYNAMIC_DB`	GATT dynamic database support
`CONFIG_BT_GATT_ENFORCE_CHANGE_UNAWARE`	GATT Enforce change-unaware state
`CONFIG_BT_GATT_NOTIFY_MULTIPLE`	GATT Notify Multiple Characteristic Values support
`CONFIG_BT_GATT_POOL`	GATT Attribute pools
`CONFIG_BT_GATT_POOL_LOG_LEVEL`
`CONFIG_BT_GATT_POOL_LOG_LEVEL_DBG`	Debug
`CONFIG_BT_GATT_POOL_LOG_LEVEL_ERR`	Error
`CONFIG_BT_GATT_POOL_LOG_LEVEL_INF`	Info
`CONFIG_BT_GATT_POOL_LOG_LEVEL_OFF`	Off
`CONFIG_BT_GATT_POOL_LOG_LEVEL_WRN`	Warning
`CONFIG_BT_GATT_POOL_STATS`	Enable functions for printing module statistics
`CONFIG_BT_GATT_READ_MULTIPLE`	GATT Read Multiple Characteristic Values support
`CONFIG_BT_GATT_SERVICE_CHANGED`	GATT Service Changed support
`CONFIG_BT_GATT_UUID128_POOL_SIZE`	Number of 128-bit UUID descriptors
`CONFIG_BT_GATT_UUID16_POOL_SIZE`	Number of 16-bit UUID descriptors
`CONFIG_BT_GATT_UUID32_POOL_SIZE`	Number of 32-bit UUID descriptors
`CONFIG_BT_H4`	H:4 UART
`CONFIG_BT_H5`	H:5 UART [EXPERIMENTAL]
`CONFIG_BT_HAS_HCI_VS`
`CONFIG_BT_HCI`	HCI-based
`CONFIG_BT_HCI_ACL_FLOW_CONTROL`	Controller to Host ACL flow control support
`CONFIG_BT_HCI_ECC_STACK_SIZE`	HCI ECC thread stack size
`CONFIG_BT_HCI_HOST`
`CONFIG_BT_HCI_MESH_EXT`	Mesh HCI Command support
`CONFIG_BT_HCI_RAW`	RAW HCI access
`CONFIG_BT_HCI_RAW_CMD_EXT`	RAW HCI Command Extension
`CONFIG_BT_HCI_RAW_H4`	RAW HCI H:4 transport
`CONFIG_BT_HCI_RAW_H4_ENABLE`	RAW HCI H:4 transport enable
`CONFIG_BT_HCI_RAW_RESERVE`	Buffer headroom needed for HCI transport
`CONFIG_BT_HCI_RESERVE`
`CONFIG_BT_HCI_TX_PRIO`
`CONFIG_BT_HCI_TX_STACK_SIZE`	HCI Tx thread stack size
`CONFIG_BT_HCI_TX_STACK_SIZE_WITH_PROMPT`	Override HCI Tx thread stack size
`CONFIG_BT_HCI_VS`	Zephyr HCI Vendor-Specific Commands
`CONFIG_BT_HCI_VS_EVT_USER`	User Vendor-Specific event handling
`CONFIG_BT_HCI_VS_EXT`	Zephyr HCI Vendor-Specific Extensions
`CONFIG_BT_HCI_VS_EXT_DETECT`	Use heuristics to guess HCI vendor extensions support in advance
`CONFIG_BT_HFP_HF`	Bluetooth Handsfree profile HF Role support [EXPERIMENTAL]
`CONFIG_BT_HIDS`	Human Interface Device service
`CONFIG_BT_HIDS_ATTR_MAX`	Maximum number of GATT attribute descriptors
`CONFIG_BT_HIDS_DEFAULT_PERM_RW`	Read and write allowed
`CONFIG_BT_HIDS_DEFAULT_PERM_RW_AUTHEN`	Require encryption using authenticated link-key for access
`CONFIG_BT_HIDS_DEFAULT_PERM_RW_ENCRYPT`	Require encryption for access
`CONFIG_BT_HIDS_FEATURE_REP_MAX`	Maximum number of HIDS Feature Report descriptors
`CONFIG_BT_HIDS_INPUT_REP_MAX`	Maximum number of HIDS Input Report descriptors
`CONFIG_BT_HIDS_LOG_LEVEL`
`CONFIG_BT_HIDS_LOG_LEVEL_DBG`	Debug
`CONFIG_BT_HIDS_LOG_LEVEL_ERR`	Error
`CONFIG_BT_HIDS_LOG_LEVEL_INF`	Info
`CONFIG_BT_HIDS_LOG_LEVEL_OFF`	Off
`CONFIG_BT_HIDS_LOG_LEVEL_WRN`	Warning
`CONFIG_BT_HIDS_MAX_CLIENT_COUNT`	Maximum HIDS clients
`CONFIG_BT_HIDS_OUTPUT_REP_MAX`	Maximum number of HIDS Output Report descriptors
`CONFIG_BT_HOGP`	HID service client
`CONFIG_BT_HOGP_LOG_LEVEL`
`CONFIG_BT_HOGP_LOG_LEVEL_DBG`	Debug
`CONFIG_BT_HOGP_LOG_LEVEL_ERR`	Error
`CONFIG_BT_HOGP_LOG_LEVEL_INF`	Info
`CONFIG_BT_HOGP_LOG_LEVEL_OFF`	Off
`CONFIG_BT_HOGP_LOG_LEVEL_WRN`	Warning
`CONFIG_BT_HOGP_REPORTS_MAX`	Maximum number of reports supported
`CONFIG_BT_HOST_CCM`	Enable host side AES-CCM module
`CONFIG_BT_HOST_CRYPTO`
`CONFIG_BT_HRS`	Enable GATT Heart Rate service
`CONFIG_BT_HRS_DEFAULT_PERM_RW`	Read and write allowed
`CONFIG_BT_HRS_DEFAULT_PERM_RW_AUTHEN`	Require encryption and authentication for access
`CONFIG_BT_HRS_DEFAULT_PERM_RW_ENCRYPT`	Require encryption for access
`CONFIG_BT_HRS_LOG_LEVEL`
`CONFIG_BT_HRS_LOG_LEVEL_DBG`	Debug
`CONFIG_BT_HRS_LOG_LEVEL_ERR`	Error
`CONFIG_BT_HRS_LOG_LEVEL_INF`	Info
`CONFIG_BT_HRS_LOG_LEVEL_OFF`	Off
`CONFIG_BT_HRS_LOG_LEVEL_WRN`	Warning
`CONFIG_BT_ID_MAX`	Maximum number of local identities
`CONFIG_BT_ISO`
`CONFIG_BT_ISO_BROADCAST`	Bluetooth Isochronous Channel Broadcast Support [EXPERIMENTAL]
`CONFIG_BT_ISO_MAX_BIG`	Maximum number of Broadcast Isochronous Groups (BIGs) to support
`CONFIG_BT_ISO_MAX_CHAN`	Maximum number of simultaneous ISO channels
`CONFIG_BT_ISO_RX_BUF_COUNT`	Number of Isochronous RX buffers
`CONFIG_BT_ISO_RX_MTU`	Maximum supported MTU for Isochronous RX buffers
`CONFIG_BT_ISO_TX_BUF_COUNT`	Number of Isochronous TX buffers
`CONFIG_BT_ISO_TX_FRAG_COUNT`	Number of ISO TX fragment buffers
`CONFIG_BT_ISO_TX_MTU`	Maximum supported MTU for Isochronous TX buffers
`CONFIG_BT_ISO_UNICAST`	Bluetooth Isochronous Channel Unicast Support [EXPERIMENTAL]
`CONFIG_BT_KEYS_OVERWRITE_OLDEST`	Overwrite the oldest key if key storage is full
`CONFIG_BT_KEYS_SAVE_AGING_COUNTER_ON_PAIRING`	Store aging counter every time a successful paring occurs
`CONFIG_BT_L2CAP_DYNAMIC_CHANNEL`	L2CAP Dynamic Channel support
`CONFIG_BT_L2CAP_ECRED`	L2CAP Enhanced Credit Based Flow Control support [EXPERIMENTAL]
`CONFIG_BT_L2CAP_TX_BUF_COUNT`	Number of L2CAP TX buffers
`CONFIG_BT_L2CAP_TX_FRAG_COUNT`	Number of L2CAP TX fragment buffers
`CONFIG_BT_L2CAP_TX_MTU`	Maximum supported L2CAP MTU for L2CAP TX buffers
`CONFIG_BT_LATENCY`	Latency service
`CONFIG_BT_LATENCY_CLIENT`	Latency service client
`CONFIG_BT_LATENCY_CLIENT_LOG_LEVEL`
`CONFIG_BT_LATENCY_CLIENT_LOG_LEVEL_DBG`	Debug
`CONFIG_BT_LATENCY_CLIENT_LOG_LEVEL_ERR`	Error
`CONFIG_BT_LATENCY_CLIENT_LOG_LEVEL_INF`	Info
`CONFIG_BT_LATENCY_CLIENT_LOG_LEVEL_OFF`	Off
`CONFIG_BT_LATENCY_CLIENT_LOG_LEVEL_WRN`	Warning
`CONFIG_BT_LATENCY_LOG_LEVEL`
`CONFIG_BT_LATENCY_LOG_LEVEL_DBG`	Debug
`CONFIG_BT_LATENCY_LOG_LEVEL_ERR`	Error
`CONFIG_BT_LATENCY_LOG_LEVEL_INF`	Info
`CONFIG_BT_LATENCY_LOG_LEVEL_OFF`	Off
`CONFIG_BT_LATENCY_LOG_LEVEL_WRN`	Warning
`CONFIG_BT_LBS`	Led Button service
`CONFIG_BT_LBS_LOG_LEVEL`
`CONFIG_BT_LBS_LOG_LEVEL_DBG`	Debug
`CONFIG_BT_LBS_LOG_LEVEL_ERR`	Error
`CONFIG_BT_LBS_LOG_LEVEL_INF`	Info
`CONFIG_BT_LBS_LOG_LEVEL_OFF`	Off
`CONFIG_BT_LBS_LOG_LEVEL_WRN`	Warning
`CONFIG_BT_LBS_POLL_BUTTON`	Support button state polling
`CONFIG_BT_LIM_ADV_TIMEOUT`	Timeout for limited advertising in 1s units
`CONFIG_BT_LLL_VENDOR_NORDIC`	Use Nordic LLL
`CONFIG_BT_LLL_VENDOR_OPENISA`	Use OpenISA LLL
`CONFIG_BT_LL_SOFTDEVICE`	SoftDevice Link Layer
`CONFIG_BT_LL_SOFTDEVICE_DEFAULT`	Select BT_LL_SOFTDEVICE as default BT_LL_CHOICE
`CONFIG_BT_LL_SOFTDEVICE_VS_INCLUDE`	Include SoftDevice Controller vendor specific HCI interface
`CONFIG_BT_LL_SW_SPLIT`	Software-based BLE Link Layer [EXPERIMENTAL]
`CONFIG_BT_LOG_LEVEL`
`CONFIG_BT_LOG_LEVEL_DBG`	Debug
`CONFIG_BT_LOG_LEVEL_ERR`	Error
`CONFIG_BT_LOG_LEVEL_INF`	Info
`CONFIG_BT_LOG_LEVEL_OFF`	Off
`CONFIG_BT_LOG_LEVEL_WRN`	Warning
`CONFIG_BT_LOG_SNIFFER_INFO`	Bluetooth log information for sniffer
`CONFIG_BT_MAX_CONN`	Maximum number of simultaneous connections
`CONFIG_BT_MAX_PAIRED`	Maximum number of paired devices
`CONFIG_BT_MAX_SCO_CONN`	Maximum number of simultaneous SCO connections
`CONFIG_BT_MAYFLY_YIELD_AFTER_CALL`	Yield from mayfly thread after first call
`CONFIG_BT_MESH`	Bluetooth mesh support [EXPERIMENTAL]
`CONFIG_BT_MESH_ACCESS_LAYER_MSG`	Enable direct Bluetooth message access layer messages
`CONFIG_BT_MESH_ADV_BUF_COUNT`	Number of advertising buffers
`CONFIG_BT_MESH_ADV_EXT`	Extended advertising
`CONFIG_BT_MESH_ADV_LEGACY`	Legacy advertising
`CONFIG_BT_MESH_ADV_STACK_SIZE`	Mesh advertiser thread stack size
`CONFIG_BT_MESH_APP_KEY_COUNT`	Maximum number of application keys per network
`CONFIG_BT_MESH_BATTERY_CLI`	Generic Battery Client
`CONFIG_BT_MESH_BATTERY_SRV`	Generic Battery Server
`CONFIG_BT_MESH_BEACON_ENABLED`	Secure network beacon enabled
`CONFIG_BT_MESH_CDB`	Mesh Configuration Database [EXPERIMENTAL]
`CONFIG_BT_MESH_CDB_APP_KEY_COUNT`	Maximum number of application keys in the database
`CONFIG_BT_MESH_CDB_NODE_COUNT`	Maximum number of nodes in the database
`CONFIG_BT_MESH_CDB_SUBNET_COUNT`	Maximum number of subnets in the database
`CONFIG_BT_MESH_CFG_CLI`	Support for Configuration Client Model
`CONFIG_BT_MESH_CRPL`	Maximum capacity of the replay protection list
`CONFIG_BT_MESH_DEBUG`	Enable debug logs
`CONFIG_BT_MESH_DEBUG_ACCESS`	Access layer debug
`CONFIG_BT_MESH_DEBUG_ADV`	Advertising debug
`CONFIG_BT_MESH_DEBUG_BEACON`	Beacon debug
`CONFIG_BT_MESH_DEBUG_CDB`	Configuration database debug
`CONFIG_BT_MESH_DEBUG_CFG`	Configuration debug
`CONFIG_BT_MESH_DEBUG_CRYPTO`	Crypto debug
`CONFIG_BT_MESH_DEBUG_FRIEND`	Friend debug
`CONFIG_BT_MESH_DEBUG_KEYS`	Key management debug
`CONFIG_BT_MESH_DEBUG_LOW_POWER`	Low Power debug
`CONFIG_BT_MESH_DEBUG_MODEL`	Foundation model debug
`CONFIG_BT_MESH_DEBUG_NET`	Network layer debug
`CONFIG_BT_MESH_DEBUG_PROV`	Provisioning debug
`CONFIG_BT_MESH_DEBUG_PROVISIONER`	Provisioner debug
`CONFIG_BT_MESH_DEBUG_PROXY`	Proxy debug
`CONFIG_BT_MESH_DEBUG_RPL`	Replay protection list debug
`CONFIG_BT_MESH_DEBUG_SETTINGS`	Persistent settings debug
`CONFIG_BT_MESH_DEBUG_TRANS`	Transport layer debug
`CONFIG_BT_MESH_DEBUG_USE_ID_ADDR`	Use identity address for all advertising
`CONFIG_BT_MESH_DEFAULT_TTL`	Default TTL value
`CONFIG_BT_MESH_DK_PROV`	Bluetooth mesh provisioning handler for Nordic DKs
`CONFIG_BT_MESH_DK_PROV_LOG_LEVEL`
`CONFIG_BT_MESH_DK_PROV_LOG_LEVEL_DBG`	Debug
`CONFIG_BT_MESH_DK_PROV_LOG_LEVEL_ERR`	Error
`CONFIG_BT_MESH_DK_PROV_LOG_LEVEL_INF`	Info
`CONFIG_BT_MESH_DK_PROV_LOG_LEVEL_OFF`	Off
`CONFIG_BT_MESH_DK_PROV_LOG_LEVEL_WRN`	Warning
`CONFIG_BT_MESH_DK_PROV_OOB_BLINK`	Enable blink output OOB method
`CONFIG_BT_MESH_DK_PROV_OOB_BUTTON`	Enable button input OOB method
`CONFIG_BT_MESH_DK_PROV_OOB_LOG`	Enable log based OOB methods
`CONFIG_BT_MESH_DTT_CLI`	Generic Default Transition Time Client
`CONFIG_BT_MESH_DTT_SRV`	Generic Default Transition Time Server
`CONFIG_BT_MESH_DTT_SRV_PERSISTENT`	Store the Default Transition Time persistently
`CONFIG_BT_MESH_FRIEND`	Support for acting as a Friend Node
`CONFIG_BT_MESH_FRIEND_ENABLED`	Friend feature enabled
`CONFIG_BT_MESH_FRIEND_LPN_COUNT`	Number of supported LPN nodes
`CONFIG_BT_MESH_FRIEND_QUEUE_SIZE`	Minimum number of buffers supported per Friend Queue
`CONFIG_BT_MESH_FRIEND_RECV_WIN`	Friend Receive Window
`CONFIG_BT_MESH_FRIEND_SEG_RX`	Number of incomplete segment lists per LPN
`CONFIG_BT_MESH_FRIEND_SUB_LIST_SIZE`	Friend Subscription List Size
`CONFIG_BT_MESH_GATT`
`CONFIG_BT_MESH_GATT_PROXY`	GATT Proxy Service support
`CONFIG_BT_MESH_GATT_PROXY_ENABLED`	GATT Proxy enabled
`CONFIG_BT_MESH_GATT_SERVER`
`CONFIG_BT_MESH_HEALTH_CLI`	Support for Health Client Model
`CONFIG_BT_MESH_IVU_DIVIDER`	Divider for IV Update state refresh timer
`CONFIG_BT_MESH_IV_UPDATE_SEQ_LIMIT`	Sequence number limit to start iv update
`CONFIG_BT_MESH_IV_UPDATE_TEST`	Test the IV Update Procedure
`CONFIG_BT_MESH_LABEL_COUNT`	Maximum number of Label UUIDs used for Virtual Addresses
`CONFIG_BT_MESH_LIGHTNESS_ACTUAL`	Actual
`CONFIG_BT_MESH_LIGHTNESS_CLI`	Light Lightness Client
`CONFIG_BT_MESH_LIGHTNESS_LINEAR`	Linear
`CONFIG_BT_MESH_LIGHTNESS_SRV`	Light Lightness Server
`CONFIG_BT_MESH_LIGHT_CTL_CLI`	Color Tunable Light (CTL) Client
`CONFIG_BT_MESH_LIGHT_CTL_SRV`	Color Tunable Light (CTL) Server
`CONFIG_BT_MESH_LIGHT_CTRL_CLI`	Light LC Client
`CONFIG_BT_MESH_LIGHT_CTRL_SRV`	Light Lightness Control (LC) Server
`CONFIG_BT_MESH_LIGHT_CTRL_SRV_LVL_ON`	Default light level in the On state
`CONFIG_BT_MESH_LIGHT_CTRL_SRV_LVL_PROLONG`	Default light level in the Prolong state
`CONFIG_BT_MESH_LIGHT_CTRL_SRV_LVL_STANDBY`	Default light level in the Standby state
`CONFIG_BT_MESH_LIGHT_CTRL_SRV_OCCUPANCY_DELAY`	Default occupancy delay
`CONFIG_BT_MESH_LIGHT_CTRL_SRV_OCCUPANCY_MODE`	Initial occupancy mode
`CONFIG_BT_MESH_LIGHT_CTRL_SRV_REG`	Lightness Regulator
`CONFIG_BT_MESH_LIGHT_CTRL_SRV_REG_ACCURACY`	Default accuracy (percent)
`CONFIG_BT_MESH_LIGHT_CTRL_SRV_REG_INTERVAL`	Update interval
`CONFIG_BT_MESH_LIGHT_CTRL_SRV_REG_KID`	Default Kid coefficient
`CONFIG_BT_MESH_LIGHT_CTRL_SRV_REG_KIU`	Default Kiu coefficient
`CONFIG_BT_MESH_LIGHT_CTRL_SRV_REG_KPD`	Default Kpd coefficient
`CONFIG_BT_MESH_LIGHT_CTRL_SRV_REG_KPU`	Default Kpu coefficient
`CONFIG_BT_MESH_LIGHT_CTRL_SRV_REG_LUX_ON`	Default target illuminance in the On state
`CONFIG_BT_MESH_LIGHT_CTRL_SRV_REG_LUX_PROLONG`	Default target illuminance in the Prolong state
`CONFIG_BT_MESH_LIGHT_CTRL_SRV_REG_LUX_STANDBY`	Default target illuminance in the Standby state
`CONFIG_BT_MESH_LIGHT_CTRL_SRV_RESUME_DELAY`	Resume delay (seconds)
`CONFIG_BT_MESH_LIGHT_CTRL_SRV_TIME_FADE_ON`	Default fade to On time
`CONFIG_BT_MESH_LIGHT_CTRL_SRV_TIME_FADE_PROLONG`	Default fade to Prolong time
`CONFIG_BT_MESH_LIGHT_CTRL_SRV_TIME_FADE_STANDBY_AUTO`	Default fade to Standby time (auto)
`CONFIG_BT_MESH_LIGHT_CTRL_SRV_TIME_FADE_STANDBY_MANUAL`	Default fade to Standby time (manual)
`CONFIG_BT_MESH_LIGHT_CTRL_SRV_TIME_MANUAL`	Manual mode timeout (seconds)
`CONFIG_BT_MESH_LIGHT_CTRL_SRV_TIME_ON`	Default time in the On state (seconds)
`CONFIG_BT_MESH_LIGHT_CTRL_SRV_TIME_PROLONG`	Default time in the Prolong state (seconds)
`CONFIG_BT_MESH_LIGHT_HSL`
`CONFIG_BT_MESH_LIGHT_HSL_CLI`	Light HSL Client
`CONFIG_BT_MESH_LIGHT_HSL_SRV`	Light HSL Server
`CONFIG_BT_MESH_LIGHT_HUE_SRV`	Light Hue Server
`CONFIG_BT_MESH_LIGHT_SAT_SRV`	Light Saturation Server
`CONFIG_BT_MESH_LIGHT_TEMP_SRV`	Color Tunable Light (CTL) Temperature Server
`CONFIG_BT_MESH_LIGHT_XYL_CLI`	xyL Client
`CONFIG_BT_MESH_LIGHT_XYL_SRV`	xyL Server
`CONFIG_BT_MESH_LOC_CLI`	Generic Location Client
`CONFIG_BT_MESH_LOC_SRV`	Generic Location Server
`CONFIG_BT_MESH_LOOPBACK_BUFS`	Number of loopback buffers
`CONFIG_BT_MESH_LOW_POWER`	Support for Low Power features
`CONFIG_BT_MESH_LPN_AUTO`	Automatically start looking for Friend nodes once provisioned
`CONFIG_BT_MESH_LPN_AUTO_TIMEOUT`	Time from last received message before going to LPN mode
`CONFIG_BT_MESH_LPN_ESTABLISHMENT`	Perform Friendship establishment using low power
`CONFIG_BT_MESH_LPN_GROUPS`	Number of groups the LPN can subscribe to
`CONFIG_BT_MESH_LPN_INIT_POLL_TIMEOUT`	The starting value of the PollTimeout timer
`CONFIG_BT_MESH_LPN_MIN_QUEUE_SIZE`	Minimum size of acceptable friend queue (MinQueueSizeLog)
`CONFIG_BT_MESH_LPN_POLL_TIMEOUT`	The value of the PollTimeout timer
`CONFIG_BT_MESH_LPN_RECV_DELAY`	Receive delay requested by the local node
`CONFIG_BT_MESH_LPN_RECV_WIN_FACTOR`	ReceiveWindowFactor, used in the Friend Offer Delay calculation
`CONFIG_BT_MESH_LPN_RETRY_TIMEOUT`	Retry timeout for Friend requests
`CONFIG_BT_MESH_LPN_RSSI_FACTOR`	RSSIFactor, used in the Friend Offer Delay calculation
`CONFIG_BT_MESH_LPN_SCAN_LATENCY`	Latency for enabling scanning
`CONFIG_BT_MESH_LPN_SUB_ALL_NODES_ADDR`	Automatically subscribe all nodes address
`CONFIG_BT_MESH_LVL_CLI`	Generic Level Client
`CONFIG_BT_MESH_LVL_SRV`	Generic Level Server
`CONFIG_BT_MESH_MODEL_EXTENSIONS`	Support for Model extensions
`CONFIG_BT_MESH_MODEL_GROUP_COUNT`	Maximum number of group address subscriptions per model
`CONFIG_BT_MESH_MODEL_KEY_COUNT`	Maximum number of application keys per model
`CONFIG_BT_MESH_MODEL_SRV_STORE_TIMEOUT`	Delay (in seconds) before storing changes to mesh model servers
`CONFIG_BT_MESH_MODEL_VND_MSG_CID_FORCE`	Force vendor model to use the corresponding CID field message
`CONFIG_BT_MESH_MOD_ACKD_TIMEOUT_BASE`	The base timeout for acknowledged messages
`CONFIG_BT_MESH_MOD_ACKD_TIMEOUT_PER_HOP`	The per hop timeout for acknowledged messages
`CONFIG_BT_MESH_MSG_CACHE_SIZE`	Network message cache size
`CONFIG_BT_MESH_NETWORK_TRANSMIT_COUNT`	Network Transmit Count
`CONFIG_BT_MESH_NETWORK_TRANSMIT_INTERVAL`	Network Transmit Interval
`CONFIG_BT_MESH_NODE_ID_TIMEOUT`	Node Identity advertising timeout
`CONFIG_BT_MESH_NRF_MODELS`
`CONFIG_BT_MESH_ONOFF_CLI`	Generic OnOff Client
`CONFIG_BT_MESH_ONOFF_SRV`	Generic OnOff Server
`CONFIG_BT_MESH_PB_ADV`	Provisioning support using the advertising bearer (PB-ADV)
`CONFIG_BT_MESH_PB_ADV_RETRANS_TIMEOUT`	Timeout value of retransmit provisioning PDUs
`CONFIG_BT_MESH_PB_GATT`	Provisioning support using GATT (PB-GATT)
`CONFIG_BT_MESH_PLVL_CLI`	Generic Power Level Client
`CONFIG_BT_MESH_PLVL_SRV`	Generic Power Level Server
`CONFIG_BT_MESH_PONOFF_CLI`	Generic Power OnOff Client
`CONFIG_BT_MESH_PONOFF_SRV`	Generic Power OnOff Server
`CONFIG_BT_MESH_PROP_CLI`	Generic Property Client
`CONFIG_BT_MESH_PROP_MAXCOUNT`	Generic Property value max count
`CONFIG_BT_MESH_PROP_MAXSIZE`	Generic Property value max size
`CONFIG_BT_MESH_PROP_SRV`	Generic Property Server
`CONFIG_BT_MESH_PROV`
`CONFIG_BT_MESH_PROVISIONER`	Provisioner support
`CONFIG_BT_MESH_PROV_DEVICE`	Provisioning device role support
`CONFIG_BT_MESH_PROV_OOB_PUBLIC_KEY`	OOB Public key support
`CONFIG_BT_MESH_PROXY`
`CONFIG_BT_MESH_PROXY_FILTER_SIZE`	Maximum number of filter entries per Proxy Client
`CONFIG_BT_MESH_PROXY_USE_DEVICE_NAME`	Include Bluetooth device name in scan response
`CONFIG_BT_MESH_RELAY`	Relay support
`CONFIG_BT_MESH_RELAY_ENABLED`	Relay enabled
`CONFIG_BT_MESH_RELAY_RETRANSMIT_COUNT`	Relay Retransmit Count
`CONFIG_BT_MESH_RELAY_RETRANSMIT_INTERVAL`	Relay Retransmit Interval
`CONFIG_BT_MESH_RPL_STORE_TIMEOUT`	Minimum interval after which unsaved RPL entries are updated in storage
`CONFIG_BT_MESH_RX_SEG_MAX`	Maximum number of segments in incoming messages
`CONFIG_BT_MESH_RX_SEG_MSG_COUNT`	Maximum number of simultaneous incoming segmented messages
`CONFIG_BT_MESH_SCENES_MAX`	Max number of scenes
`CONFIG_BT_MESH_SCENE_CLI`	Scene Client
`CONFIG_BT_MESH_SCENE_SRV`	Scene Server
`CONFIG_BT_MESH_SCHEDULER_CLI`	Scheduler Client
`CONFIG_BT_MESH_SCHEDULER_SRV`	Scheduler Server
`CONFIG_BT_MESH_SEG_BUFS`	Number of segment buffers available
`CONFIG_BT_MESH_SELF_TEST`	Perform self-tests
`CONFIG_BT_MESH_SENSOR`
`CONFIG_BT_MESH_SENSOR_ALL_TYPES`	Force all sensor types to be known
`CONFIG_BT_MESH_SENSOR_CHANNELS_MAX`	Max sensor channels
`CONFIG_BT_MESH_SENSOR_CHANNEL_ENCODED_SIZE_MAX`	Max sensor channel encoded length
`CONFIG_BT_MESH_SENSOR_CLI`	Sensor Client
`CONFIG_BT_MESH_SENSOR_LABELS`	Enable Sensor labels
`CONFIG_BT_MESH_SENSOR_SRV`	Sensor Server
`CONFIG_BT_MESH_SENSOR_SRV_SENSORS_MAX`	Max number of sensors per server
`CONFIG_BT_MESH_SENSOR_SRV_SETTINGS_MAX`	Max setting parameters per sensor in a server
`CONFIG_BT_MESH_SEQ_STORE_RATE`	How often the sequence number gets updated in storage
`CONFIG_BT_MESH_SHELL`	Enable Bluetooth mesh shell
`CONFIG_BT_MESH_SILVAIR_ENOCEAN_AUTO_COMMISSION`	Automatically commission
`CONFIG_BT_MESH_SILVAIR_ENOCEAN_DELTA`	Delta increment/decrement size
`CONFIG_BT_MESH_SILVAIR_ENOCEAN_DELTA_TIMEOUT`	Delta timeout
`CONFIG_BT_MESH_SILVAIR_ENOCEAN_SRV`	Silvair EnOcean Proxy Server
`CONFIG_BT_MESH_SILVAIR_ENOCEAN_TICK_TIME`	Tick time
`CONFIG_BT_MESH_SILVAIR_ENOCEAN_WAIT_TIME`	Wait time
`CONFIG_BT_MESH_STORE_TIMEOUT`	Delay (in seconds) before storing anything persistently
`CONFIG_BT_MESH_SUBNET_COUNT`	Maximum number of mesh subnets per network
`CONFIG_BT_MESH_TIME`
`CONFIG_BT_MESH_TIME_CLI`	Time Client
`CONFIG_BT_MESH_TIME_MESH_HOP_UNCERTAINTY`	Time model mesh hop uncertainty
`CONFIG_BT_MESH_TIME_SRV`	Time Server
`CONFIG_BT_MESH_TIME_SRV_CLOCK_ACCURACY`	Time model clock uncertainty
`CONFIG_BT_MESH_TIME_SRV_PERSISTENT`	Store the Time Server context persistently
`CONFIG_BT_MESH_TX_SEG_MAX`	Maximum number of segments in outgoing messages
`CONFIG_BT_MESH_TX_SEG_MSG_COUNT`	Maximum number of simultaneous outgoing segmented messages
`CONFIG_BT_MESH_TX_SEG_RETRANS_COUNT`	Transport message segment retransmit attempts
`CONFIG_BT_MESH_TX_SEG_RETRANS_TIMEOUT_GROUP`	Transport message segment retransmit interval for group messages
`CONFIG_BT_MESH_TX_SEG_RETRANS_TIMEOUT_UNICAST`	Transport message segment retransmit interval for unicast messages
`CONFIG_BT_MESH_UNPROV_BEACON_INT`	The interval (in seconds) to send the unprovisioned beacon
`CONFIG_BT_MESH_VENDOR_MODELS`
`CONFIG_BT_MICS`	Microphone Input Control Service Support
`CONFIG_BT_MICS_AICS`
`CONFIG_BT_MICS_AICS_INSTANCE_COUNT`	Audio Input Control Service instance count for Microphone Input Control Service
`CONFIG_BT_MICS_CLIENT`	Microphone Control Profile Support
`CONFIG_BT_MICS_CLIENT_AICS`
`CONFIG_BT_MICS_CLIENT_MAX_AICS_INST`	Maximum number of Audio Input Control Service instances to setup
`CONFIG_BT_MONITOR`
`CONFIG_BT_MONITOR_ON_DEV_NAME`	Device Name of Bluetooth monitor logging UART
`CONFIG_BT_NO_DRIVER`	No default HCI driver
`CONFIG_BT_NRF_SERVICES`
`CONFIG_BT_NUS`	Nordic UART service
`CONFIG_BT_NUS_CLIENT`	Nordic UART service client
`CONFIG_BT_NUS_CLIENT_LOG_LEVEL`
`CONFIG_BT_NUS_CLIENT_LOG_LEVEL_DBG`	Debug
`CONFIG_BT_NUS_CLIENT_LOG_LEVEL_ERR`	Error
`CONFIG_BT_NUS_CLIENT_LOG_LEVEL_INF`	Info
`CONFIG_BT_NUS_CLIENT_LOG_LEVEL_OFF`	Off
`CONFIG_BT_NUS_CLIENT_LOG_LEVEL_WRN`	Warning
`CONFIG_BT_NUS_LOG_LEVEL`
`CONFIG_BT_NUS_LOG_LEVEL_DBG`	Debug
`CONFIG_BT_NUS_LOG_LEVEL_ERR`	Error
`CONFIG_BT_NUS_LOG_LEVEL_INF`	Info
`CONFIG_BT_NUS_LOG_LEVEL_OFF`	Off
`CONFIG_BT_NUS_LOG_LEVEL_WRN`	Warning
`CONFIG_BT_OBSERVER`	Observer Role support
`CONFIG_BT_OOB_DATA_FIXED`	Use a fixed random number for LESC OOB pairing
`CONFIG_BT_OTS`	Object Transfer Service (OTS) [EXPERIMENTAL]
`CONFIG_BT_OTS_DIR_LIST_OBJ`	Enables the Directory Listing Object
`CONFIG_BT_OTS_DIR_LIST_OBJ_NAME`	The object name of the Directory Listing Object
`CONFIG_BT_OTS_L2CAP_CHAN_RX_MTU`	Size of RX MTU for Object Transfer Channel
`CONFIG_BT_OTS_LOG_LEVEL`
`CONFIG_BT_OTS_LOG_LEVEL_DBG`	Debug
`CONFIG_BT_OTS_LOG_LEVEL_ERR`	Error
`CONFIG_BT_OTS_LOG_LEVEL_INF`	Info
`CONFIG_BT_OTS_LOG_LEVEL_OFF`	Off
`CONFIG_BT_OTS_LOG_LEVEL_WRN`	Warning
`CONFIG_BT_OTS_MAX_INST_CNT`	Maximum number of available OTS instances
`CONFIG_BT_OTS_MAX_OBJ_CNT`	Maximum number of objects that each service instance can store
`CONFIG_BT_OTS_OACP_READ_SUPPORT`	Support OACP Read Operation
`CONFIG_BT_OTS_OBJ_MAX_NAME_LEN`	Maximum object name length
`CONFIG_BT_OTS_OBJ_NAME_WRITE_SUPPORT`	Support object name write
`CONFIG_BT_OTS_OLCP_GO_TO_SUPPORT`	Support OLCP Go To Operation
`CONFIG_BT_OTS_SECONDARY_SVC`	Register OTS as Secondary Service
`CONFIG_BT_PAGE_TIMEOUT`	Bluetooth Page Timeout
`CONFIG_BT_PERIPHERAL`	Peripheral Role support
`CONFIG_BT_PERIPHERAL_PREF_MAX_INT`	Peripheral preferred maximum connection interval in 1.25ms units
`CONFIG_BT_PERIPHERAL_PREF_MIN_INT`	Peripheral preferred minimum connection interval in 1.25ms units
`CONFIG_BT_PERIPHERAL_PREF_SLAVE_LATENCY`	Peripheral preferred slave latency in Connection Intervals
`CONFIG_BT_PERIPHERAL_PREF_TIMEOUT`	Peripheral preferred supervision timeout in 10ms units
`CONFIG_BT_PER_ADV`	Periodic Advertising and Scanning support [EXPERIMENTAL]
`CONFIG_BT_PER_ADV_SYNC`	Periodic advertising sync support [EXPERIMENTAL]
`CONFIG_BT_PER_ADV_SYNC_MAX`	Maximum number of simultaneous periodic advertising syncs
`CONFIG_BT_PHY_UPDATE`	PHY Update
`CONFIG_BT_PRIVACY`	Privacy Feature
`CONFIG_BT_RECV_IS_RX_THREAD`	bt_recv is called from RX thread
`CONFIG_BT_REMOTE_INFO`	Enable application access to remote information
`CONFIG_BT_REMOTE_VERSION`	Enable fetching of remote version
`CONFIG_BT_RFCOMM`	Bluetooth RFCOMM protocol support [EXPERIMENTAL]
`CONFIG_BT_RFCOMM_L2CAP_MTU`	L2CAP MTU for RFCOMM frames
`CONFIG_BT_RPA`
`CONFIG_BT_RPA_TIMEOUT`	Resolvable Private Address timeout
`CONFIG_BT_RPC`	Bluetooth over RPC
`CONFIG_BT_RPC_CLIENT`	Bluetooth over RPC Client
`CONFIG_BT_RPC_HOST`	Bluetooth over RPC Host
`CONFIG_BT_RPC_HOST_NRF53_SRAM_SIZE`
`CONFIG_BT_RPC_INITIALIZE_NRF_RPC`	Automatically initialize nRF RPC library
`CONFIG_BT_RPC_LOG_LEVEL`
`CONFIG_BT_RPC_LOG_LEVEL_DBG`	Debug
`CONFIG_BT_RPC_LOG_LEVEL_ERR`	Error
`CONFIG_BT_RPC_LOG_LEVEL_INF`	Info
`CONFIG_BT_RPC_LOG_LEVEL_OFF`	Off
`CONFIG_BT_RPC_LOG_LEVEL_WRN`	Warning
`CONFIG_BT_RPMSG`	HCI using RPMsg
`CONFIG_BT_RPMSG_NRF53`	nRF53 configuration of RPMsg
`CONFIG_BT_RSCS`	Running Speed and Cadence Service
`CONFIG_BT_RSCS_LOG_LEVEL`
`CONFIG_BT_RSCS_LOG_LEVEL_DBG`	Debug
`CONFIG_BT_RSCS_LOG_LEVEL_ERR`	Error
`CONFIG_BT_RSCS_LOG_LEVEL_INF`	Info
`CONFIG_BT_RSCS_LOG_LEVEL_OFF`	Off
`CONFIG_BT_RSCS_LOG_LEVEL_WRN`	Warning
`CONFIG_BT_RX_PRIO`
`CONFIG_BT_RX_STACK_SIZE`	Size of the receiving thread stack
`CONFIG_BT_RX_USER_PDU_LEN`	Maximum supported proprietary PDU buffer length
`CONFIG_BT_SCAN`	Scan library
`CONFIG_BT_SCAN_ADDRESS_CNT`	Number of address filters
`CONFIG_BT_SCAN_APPEARANCE_CNT`	Number of appearance filters
`CONFIG_BT_SCAN_BLOCKLIST`	Scanning device blocklist
`CONFIG_BT_SCAN_BLOCKLIST_LEN`	Blocklist maximum device count
`CONFIG_BT_SCAN_CONN_ATTEMPTS_COUNT`	Connection attempts count
`CONFIG_BT_SCAN_CONN_ATTEMPTS_FILTER`	Connection attempts filter
`CONFIG_BT_SCAN_CONN_ATTEMPTS_FILTER_LEN`	Connection attempts filtered device count
`CONFIG_BT_SCAN_FILTER_ENABLE`	Enabling filters for the Scan library.
`CONFIG_BT_SCAN_LOG_LEVEL`
`CONFIG_BT_SCAN_LOG_LEVEL_DBG`	Debug
`CONFIG_BT_SCAN_LOG_LEVEL_ERR`	Error
`CONFIG_BT_SCAN_LOG_LEVEL_INF`	Info
`CONFIG_BT_SCAN_LOG_LEVEL_OFF`	Off
`CONFIG_BT_SCAN_LOG_LEVEL_WRN`	Warning
`CONFIG_BT_SCAN_MANUFACTURER_DATA_CNT`	Number of manufacturer data filters
`CONFIG_BT_SCAN_MANUFACTURER_DATA_MAX_LEN`	Maximum size for the manufacturer data to search in the advertisement report.
`CONFIG_BT_SCAN_NAME_CNT`	Number of name filters
`CONFIG_BT_SCAN_NAME_MAX_LEN`	Maximum size for the name to search in the advertisement report.
`CONFIG_BT_SCAN_SHORT_NAME_CNT`	Number of short name filters
`CONFIG_BT_SCAN_SHORT_NAME_MAX_LEN`	Maximum size of the short name to search for in the advertisement report.
`CONFIG_BT_SCAN_UUID_CNT`	Number of filters for UUIDs.
`CONFIG_BT_SCAN_WITH_IDENTITY`	Perform active scanning using local identity address
`CONFIG_BT_SETTINGS`	Store Bluetooth state and configuration persistently
`CONFIG_BT_SETTINGS_CCC_LAZY_LOADING`	Load CCC values from settings when peer connects
`CONFIG_BT_SETTINGS_CCC_STORE_ON_WRITE`	Store CCC value immediately after it has been written
`CONFIG_BT_SETTINGS_USE_PRINTK`	Use snprintk to encode Bluetooth settings key strings
`CONFIG_BT_SHELL`	Enable Bluetooth shell
`CONFIG_BT_SIGNING`	Data signing support
`CONFIG_BT_SMP`	Security Manager Protocol support
`CONFIG_BT_SMP_ALLOW_UNAUTH_OVERWRITE`	Allow unauthenticated pairing for paired device
`CONFIG_BT_SMP_APP_PAIRING_ACCEPT`	Accept or reject pairing initiative
`CONFIG_BT_SMP_DISABLE_LEGACY_JW_PASSKEY`	Forbid usage of insecure legacy pairing methods
`CONFIG_BT_SMP_ENFORCE_MITM`	Enforce MITM protection
`CONFIG_BT_SMP_FORCE_BREDR`	Force Bluetooth SMP over BR/EDR
`CONFIG_BT_SMP_MIN_ENC_KEY_SIZE`	Minimum encryption key size accepted in octets
`CONFIG_BT_SMP_OOB_LEGACY_PAIR_ONLY`	Force Out Of Band Legacy pairing
`CONFIG_BT_SMP_SC_ONLY`	Secure Connections Only Mode
`CONFIG_BT_SMP_SC_PAIR_ONLY`	Disable legacy pairing
`CONFIG_BT_SMP_SELFTEST`	Bluetooth SMP self tests executed on init
`CONFIG_BT_SMP_USB_HCI_CTLR_WORKAROUND`	Workaround for USB HCI controller out-of-order events
`CONFIG_BT_SPI`	SPI HCI
`CONFIG_BT_SPI_BLUENRG`	Enable compatibility with BlueNRG-based devices
`CONFIG_BT_SPI_INIT_PRIORITY`	BT SPI init priority
`CONFIG_BT_STM32_IPM`	IPM HCI
`CONFIG_BT_STM32_IPM_RX_STACK_SIZE`	STM32 IPM stack size for RX thread
`CONFIG_BT_STORE_DEBUG_KEYS`	Store Debug Mode bonds
`CONFIG_BT_TESTING`	Bluetooth Testing
`CONFIG_BT_THROUGHPUT`	Throughput service
`CONFIG_BT_THROUGHPUT_LOG_LEVEL`
`CONFIG_BT_THROUGHPUT_LOG_LEVEL_DBG`	Debug
`CONFIG_BT_THROUGHPUT_LOG_LEVEL_ERR`	Error
`CONFIG_BT_THROUGHPUT_LOG_LEVEL_INF`	Info
`CONFIG_BT_THROUGHPUT_LOG_LEVEL_OFF`	Off
`CONFIG_BT_THROUGHPUT_LOG_LEVEL_WRN`	Warning
`CONFIG_BT_TICKER_EXT`	Ticker extensions
`CONFIG_BT_TICKER_LAZY_GET`	Ticker Next Slot Get with Lazy
`CONFIG_BT_TICKER_LOW_LAT`	Ticker low latency mode
`CONFIG_BT_TICKER_NEXT_SLOT_GET_MATCH`	Ticker Next Slot Get with match callback
`CONFIG_BT_TICKER_SLOT_AGNOSTIC`	Slot agnostic ticker mode
`CONFIG_BT_TINYCRYPT_ECC`	Emulate ECDH in the Host using TinyCrypt library
`CONFIG_BT_TPS`	Enable GATT TX Power service
`CONFIG_BT_TPS_LOG_LEVEL`
`CONFIG_BT_TPS_LOG_LEVEL_DBG`	Debug
`CONFIG_BT_TPS_LOG_LEVEL_ERR`	Error
`CONFIG_BT_TPS_LOG_LEVEL_INF`	Info
`CONFIG_BT_TPS_LOG_LEVEL_OFF`	Off
`CONFIG_BT_TPS_LOG_LEVEL_WRN`	Warning
`CONFIG_BT_UART`
`CONFIG_BT_UART_ON_DEV_NAME`	Device Name of UART Device for Bluetooth
`CONFIG_BT_USERCHAN`	HCI User Channel based driver
`CONFIG_BT_USER_DATA_LEN_UPDATE`	User control of Data Length Update Procedure
`CONFIG_BT_USER_PHY_UPDATE`	User control of PHY Update Procedure
`CONFIG_BT_USE_DEBUG_KEYS`	Enable Security Manager Debug Mode
`CONFIG_BT_VCS`	Volume Control Service Support
`CONFIG_BT_VCS_AICS`
`CONFIG_BT_VCS_AICS_INSTANCE_COUNT`	Audio Input Control Service instance count for VCS
`CONFIG_BT_VCS_CLIENT`	Volume Control Profile Support
`CONFIG_BT_VCS_CLIENT_AICS`
`CONFIG_BT_VCS_CLIENT_MAX_AICS_INST`	Maximum number of AICS instances to setup
`CONFIG_BT_VCS_CLIENT_MAX_VOCS_INST`	Maximum number of VOCS instances to setup
`CONFIG_BT_VCS_CLIENT_VOCS`
`CONFIG_BT_VCS_VOCS`
`CONFIG_BT_VCS_VOCS_INSTANCE_COUNT`	Volume Offset Control Service instance count
`CONFIG_BT_VOCS`
`CONFIG_BT_VOCS_CLIENT`
`CONFIG_BT_VOCS_CLIENT_MAX_INSTANCE_COUNT`	Volume Offset Control Service client max instance count
`CONFIG_BT_VOCS_MAX_INSTANCE_COUNT`	Volume Offset Control Service max instance count
`CONFIG_BT_VOCS_MAX_OUTPUT_DESCRIPTION_SIZE`	Volume Offset Control Service max output description size
`CONFIG_BT_WAIT_NOP`	Wait for “NOP” Command Complete event during init
`CONFIG_BT_WHITELIST`	Enable whitelist support
`CONFIG_BUILD_NO_GAP_FILL`	Don’t fill gaps in generated hex/bin/s19 files.
`CONFIG_BUILD_OUTPUT_BIN`	Build a binary in BIN format
`CONFIG_BUILD_OUTPUT_EFI`	Build as an EFI application
`CONFIG_BUILD_OUTPUT_EXE`	Build a binary in ELF format with .exe extension
`CONFIG_BUILD_OUTPUT_HEX`	Build a binary in HEX format
`CONFIG_BUILD_OUTPUT_S19`	Build a binary in S19 format
`CONFIG_BUILD_OUTPUT_STRIPPED`	Build a stripped binary
`CONFIG_BUILD_OUTPUT_UF2`	Build a binary in UF2 format
`CONFIG_BUILD_OUTPUT_UF2_FAMILY_ID`	UF2 device family ID
`CONFIG_BUILD_S1_VARIANT`	Build S1 variant of specified image
`CONFIG_BUILD_WITH_TFM`	Build with TF-M as the Secure Execution Environment
`CONFIG_BUILTIN_STACK_GUARD`	Thread Stack Guards based on built-in ARM stack limit checking
`CONFIG_BYPASS_LDO_LPSR`	Bypass LDO lpsr
`CONFIG_CACHE`	External cache controllers drivers
`CONFIG_CACHE_HAS_DRIVER`
`CONFIG_CACHE_LOG_LEVEL`
`CONFIG_CACHE_LOG_LEVEL_DBG`	Debug
`CONFIG_CACHE_LOG_LEVEL_ERR`	Error
`CONFIG_CACHE_LOG_LEVEL_INF`	Info
`CONFIG_CACHE_LOG_LEVEL_OFF`	Off
`CONFIG_CACHE_LOG_LEVEL_WRN`	Warning
`CONFIG_CACHE_MANAGEMENT`	Enable cache management features
`CONFIG_CAF`	Common Application Framework
`CONFIG_CAF_BLE_ADV`	Enable Bluetooth LE advertising
`CONFIG_CAF_BLE_ADV_DEF_PATH`	Configuration file
`CONFIG_CAF_BLE_ADV_DIRECT_ADV`	Advertise to bonded peer directly
`CONFIG_CAF_BLE_ADV_FAST_ADV`	Enable period of fast advertising
`CONFIG_CAF_BLE_ADV_FAST_ADV_TIMEOUT`	Time of initial fast advertising [s]
`CONFIG_CAF_BLE_ADV_LOG_LEVEL`
`CONFIG_CAF_BLE_ADV_LOG_LEVEL_DBG`	Debug
`CONFIG_CAF_BLE_ADV_LOG_LEVEL_ERR`	Error
`CONFIG_CAF_BLE_ADV_LOG_LEVEL_INF`	Info
`CONFIG_CAF_BLE_ADV_LOG_LEVEL_OFF`	Off
`CONFIG_CAF_BLE_ADV_LOG_LEVEL_WRN`	Warning
`CONFIG_CAF_BLE_ADV_PM_EVENTS`	Power management events support
`CONFIG_CAF_BLE_ADV_SWIFT_PAIR`	Enable Swift Pair feature
`CONFIG_CAF_BLE_ADV_SWIFT_PAIR_GRACE_PERIOD`	No Swift Pair time gap before suspend [s]
`CONFIG_CAF_BLE_BOND_SUPPORTED`	Application supports Bluetooth LE bond module
`CONFIG_CAF_BLE_COMMON_EVENTS`	Enable BLE common events
`CONFIG_CAF_BLE_SMP`	SMP over Bluetooth LE module
`CONFIG_CAF_BLE_SMP_LOG_LEVEL`
`CONFIG_CAF_BLE_SMP_LOG_LEVEL_DBG`	Debug
`CONFIG_CAF_BLE_SMP_LOG_LEVEL_ERR`	Error
`CONFIG_CAF_BLE_SMP_LOG_LEVEL_INF`	Info
`CONFIG_CAF_BLE_SMP_LOG_LEVEL_OFF`	Off
`CONFIG_CAF_BLE_SMP_LOG_LEVEL_WRN`	Warning
`CONFIG_CAF_BLE_SMP_TRANSFER_EVENTS`	Enable BLE SMP events
`CONFIG_CAF_BLE_STATE`	Bluetooth LE state module
`CONFIG_CAF_BLE_STATE_EXCHANGE_MTU`	Exchange MTU
`CONFIG_CAF_BLE_STATE_LOG_LEVEL`
`CONFIG_CAF_BLE_STATE_LOG_LEVEL_DBG`	Debug
`CONFIG_CAF_BLE_STATE_LOG_LEVEL_ERR`	Error
`CONFIG_CAF_BLE_STATE_LOG_LEVEL_INF`	Info
`CONFIG_CAF_BLE_STATE_LOG_LEVEL_OFF`	Off
`CONFIG_CAF_BLE_STATE_LOG_LEVEL_WRN`	Warning
`CONFIG_CAF_BLE_STATE_PM`	Enable bluetooth LE power manager integration
`CONFIG_CAF_BLE_STATE_TX_PWR`
`CONFIG_CAF_BLE_USE_LLPM`	Enable Low Latency Packet Mode (LLPM)
`CONFIG_CAF_BUTTONS`	Buttons module
`CONFIG_CAF_BUTTONS_DEBOUNCE_INTERVAL`	Interval before first button scan in ms
`CONFIG_CAF_BUTTONS_DEF_PATH`	Configuration file
`CONFIG_CAF_BUTTONS_EVENT_LIMIT`	Number of button events in a single scan loop
`CONFIG_CAF_BUTTONS_LOG_LEVEL`
`CONFIG_CAF_BUTTONS_LOG_LEVEL_DBG`	Debug
`CONFIG_CAF_BUTTONS_LOG_LEVEL_ERR`	Error
`CONFIG_CAF_BUTTONS_LOG_LEVEL_INF`	Info
`CONFIG_CAF_BUTTONS_LOG_LEVEL_OFF`	Off
`CONFIG_CAF_BUTTONS_LOG_LEVEL_WRN`	Warning
`CONFIG_CAF_BUTTONS_PM_EVENTS`	Power management events support
`CONFIG_CAF_BUTTONS_POLARITY_INVERSED`	Inverse buttons polarity
`CONFIG_CAF_BUTTONS_SCAN_INTERVAL`	Buttons scan interval in ms
`CONFIG_CAF_BUTTON_EVENTS`	Enable button events
`CONFIG_CAF_CLICK_DETECTOR`	Click detector module
`CONFIG_CAF_CLICK_DETECTOR_DEF_PATH`	Configuration file
`CONFIG_CAF_CLICK_DETECTOR_LOG_LEVEL`
`CONFIG_CAF_CLICK_DETECTOR_LOG_LEVEL_DBG`	Debug
`CONFIG_CAF_CLICK_DETECTOR_LOG_LEVEL_ERR`	Error
`CONFIG_CAF_CLICK_DETECTOR_LOG_LEVEL_INF`	Info
`CONFIG_CAF_CLICK_DETECTOR_LOG_LEVEL_OFF`	Off
`CONFIG_CAF_CLICK_DETECTOR_LOG_LEVEL_WRN`	Warning
`CONFIG_CAF_CLICK_DETECTOR_PM_EVENTS`	Power management events support
`CONFIG_CAF_CLICK_EVENTS`	Enable click events
`CONFIG_CAF_FACTORY_RESET_EVENTS`	Enable factory reset events
`CONFIG_CAF_FACTORY_RESET_REQUEST`	Enable factory reset request module
`CONFIG_CAF_FACTORY_RESET_REQUEST_BUTTON`	Key ID of button used to request factory reset
`CONFIG_CAF_FACTORY_RESET_REQUEST_DELAY`	Time in miliseconds to wait for button event at initialization
`CONFIG_CAF_FORCE_POWER_DOWN_EVENTS`	Enable force Power down event
`CONFIG_CAF_INIT_LOG_BLE_PEER_CONN_PARAMS_EVENTS`	Log BLE peer connection parameters events
`CONFIG_CAF_INIT_LOG_BLE_PEER_EVENTS`	Log BLE peer events
`CONFIG_CAF_INIT_LOG_BLE_PEER_OPERATION_EVENTS`	Log BLE peer operation events
`CONFIG_CAF_INIT_LOG_BLE_PEER_SEARCH_EVENTS`	Log BLE peer search events
`CONFIG_CAF_INIT_LOG_BLE_SMP_TRANSFER_EVENTS`	Log BLE SMP transfer events
`CONFIG_CAF_INIT_LOG_BUTTON_EVENTS`	Log button events
`CONFIG_CAF_INIT_LOG_CLICK_EVENTS`	Log click events
`CONFIG_CAF_INIT_LOG_FACTORY_RESET_EVENTS`	Log factory reset events
`CONFIG_CAF_INIT_LOG_FORCE_POWER_DOWN_EVENTS`	Log force power down event
`CONFIG_CAF_INIT_LOG_KEEP_ALIVE_EVENTS`	Log power manager keep alive events
`CONFIG_CAF_INIT_LOG_LED_EVENTS`	Log LED events
`CONFIG_CAF_INIT_LOG_LED_READY_EVENTS`	Log LED ready event
`CONFIG_CAF_INIT_LOG_MODULE_STATE_EVENTS`	Log module state events
`CONFIG_CAF_INIT_LOG_NET_STATE_EVENTS`	Log network state events
`CONFIG_CAF_INIT_LOG_POWER_DOWN_EVENTS`	Log power down events
`CONFIG_CAF_INIT_LOG_POWER_MANAGER_EVENTS`	Log power manager event
`CONFIG_CAF_INIT_LOG_SENSOR_EVENTS`	Log sensor events
`CONFIG_CAF_INIT_LOG_SENSOR_STATE_EVENTS`	Log sensor state events
`CONFIG_CAF_INIT_LOG_WAKE_UP_EVENTS`	Log wake up events
`CONFIG_CAF_KEEP_ALIVE_EVENTS`	Enable keep alive events
`CONFIG_CAF_LEDS`	LEDs module
`CONFIG_CAF_LEDS_GPIO`	GPIO
`CONFIG_CAF_LEDS_LOG_LEVEL`
`CONFIG_CAF_LEDS_LOG_LEVEL_DBG`	Debug
`CONFIG_CAF_LEDS_LOG_LEVEL_ERR`	Error
`CONFIG_CAF_LEDS_LOG_LEVEL_INF`	Info
`CONFIG_CAF_LEDS_LOG_LEVEL_OFF`	Off
`CONFIG_CAF_LEDS_LOG_LEVEL_WRN`	Warning
`CONFIG_CAF_LEDS_PM_EVENTS`	Power management events support
`CONFIG_CAF_LEDS_PWM`	PWM
`CONFIG_CAF_LED_EVENTS`	Enable LED events
`CONFIG_CAF_LOG_NET_STATE_WAITING`	Log waiting on connection
`CONFIG_CAF_LOG_NET_STATE_WAITING_PERIOD`	Waiting on connection log period [s]
`CONFIG_CAF_MODULES_FLAGS_COUNT`	Number of supported modules
`CONFIG_CAF_MODULE_STATE_EVENTS`	Enable module state events
`CONFIG_CAF_NET_STATE`	Networking state processing
`CONFIG_CAF_NET_STATE_EVENTS`	Enable network state events
`CONFIG_CAF_NET_STATE_LTE`
`CONFIG_CAF_NET_STATE_LTE_LOG_LEVEL`
`CONFIG_CAF_NET_STATE_LTE_LOG_LEVEL_DBG`	Debug
`CONFIG_CAF_NET_STATE_LTE_LOG_LEVEL_ERR`	Error
`CONFIG_CAF_NET_STATE_LTE_LOG_LEVEL_INF`	Info
`CONFIG_CAF_NET_STATE_LTE_LOG_LEVEL_OFF`	Off
`CONFIG_CAF_NET_STATE_LTE_LOG_LEVEL_WRN`	Warning
`CONFIG_CAF_NET_STATE_OT`
`CONFIG_CAF_NET_STATE_OT_LOG_LEVEL`
`CONFIG_CAF_NET_STATE_OT_LOG_LEVEL_DBG`	Debug
`CONFIG_CAF_NET_STATE_OT_LOG_LEVEL_ERR`	Error
`CONFIG_CAF_NET_STATE_OT_LOG_LEVEL_INF`	Info
`CONFIG_CAF_NET_STATE_OT_LOG_LEVEL_OFF`	Off
`CONFIG_CAF_NET_STATE_OT_LOG_LEVEL_WRN`	Warning
`CONFIG_CAF_PM_EVENTS`	Enable power management events
`CONFIG_CAF_POWER_MANAGER`	Enable power management
`CONFIG_CAF_POWER_MANAGER_ERROR_TIMEOUT`	Power manager timeout on error [s]
`CONFIG_CAF_POWER_MANAGER_EVENTS`	Power manager event
`CONFIG_CAF_POWER_MANAGER_LOG_LEVEL`
`CONFIG_CAF_POWER_MANAGER_LOG_LEVEL_DBG`	Debug
`CONFIG_CAF_POWER_MANAGER_LOG_LEVEL_ERR`	Error
`CONFIG_CAF_POWER_MANAGER_LOG_LEVEL_INF`	Info
`CONFIG_CAF_POWER_MANAGER_LOG_LEVEL_OFF`	Off
`CONFIG_CAF_POWER_MANAGER_LOG_LEVEL_WRN`	Warning
`CONFIG_CAF_POWER_MANAGER_STAY_ON`	Stay on while no connections
`CONFIG_CAF_POWER_MANAGER_TIMEOUT`	Power down timeout [s]
`CONFIG_CAF_SENSOR_EVENTS`	Enable sensor events
`CONFIG_CAF_SENSOR_SAMPLER`	Sensor sampler module
`CONFIG_CAF_SENSOR_SAMPLER_DEF_PATH`	Configuration file
`CONFIG_CAF_SENSOR_SAMPLER_LOG_LEVEL`
`CONFIG_CAF_SENSOR_SAMPLER_LOG_LEVEL_DBG`	Debug
`CONFIG_CAF_SENSOR_SAMPLER_LOG_LEVEL_ERR`	Error
`CONFIG_CAF_SENSOR_SAMPLER_LOG_LEVEL_INF`	Info
`CONFIG_CAF_SENSOR_SAMPLER_LOG_LEVEL_OFF`	Off
`CONFIG_CAF_SENSOR_SAMPLER_LOG_LEVEL_WRN`	Warning
`CONFIG_CAF_SENSOR_SAMPLER_THREAD_PRIORITY`	Priority of sensor sampler thread
`CONFIG_CAF_SENSOR_SAMPLER_THREAD_STACK_SIZE`	Size of sensor sampler thread stack
`CONFIG_CAN`	CAN Drivers
`CONFIG_CANFD_MAX_DLC`	Max data length code in CAN frames
`CONFIG_CANOPEN`	CANopen protocol support
`CONFIG_CANOPENNODE`	CANopenNode support
`CONFIG_CANOPENNODE_LEDS`	CANopen LED indicators
`CONFIG_CANOPENNODE_LEDS_BICOLOR`	CANopen bicolor LED indicator
`CONFIG_CANOPENNODE_PROGRAM_DOWNLOAD`	CANopen program download
`CONFIG_CANOPENNODE_SDO_BUFFER_SIZE`	CANopen SDO buffer size
`CONFIG_CANOPENNODE_STORAGE`	CANopen object dictionary storage
`CONFIG_CANOPENNODE_STORAGE_HANDLER_ERASES_EEPROM`	Erase CANopen object dictionary EEPROM entries in storage handler
`CONFIG_CANOPENNODE_SYNC_THREAD`	CANopen SYNC thread
`CONFIG_CANOPENNODE_SYNC_THREAD_PRIORITY`	Priority for CANopen SYNC thread
`CONFIG_CANOPENNODE_SYNC_THREAD_STACK_SIZE`	Stack size for the CANopen SYNC thread
`CONFIG_CANOPENNODE_TRACE_BUFFER_SIZE`	CANopen trace buffer size
`CONFIG_CANOPENNODE_TX_WORKQUEUE_PRIORITY`	Priority for CANopen transmit workqueue
`CONFIG_CANOPENNODE_TX_WORKQUEUE_STACK_SIZE`	Stack size for the CANopen transmit workqueue
`CONFIG_CANOPEN_LOG_LEVEL`
`CONFIG_CANOPEN_LOG_LEVEL_DBG`	Debug
`CONFIG_CANOPEN_LOG_LEVEL_ERR`	Error
`CONFIG_CANOPEN_LOG_LEVEL_INF`	Info
`CONFIG_CANOPEN_LOG_LEVEL_OFF`	Off
`CONFIG_CANOPEN_LOG_LEVEL_WRN`	Warning
`CONFIG_CAN_AUTO_BUS_OFF_RECOVERY`	Enable automatic recovery from bus-off
`CONFIG_CAN_DELAY_COMP`	Enable transceiver delay compensation
`CONFIG_CAN_FD_MODE`	CAN-FD
`CONFIG_CAN_HAS_CANFD`
`CONFIG_CAN_HAS_RX_TIMESTAMP`
`CONFIG_CAN_INIT_PRIORITY`	CAN driver init priority
`CONFIG_CAN_LOG_LEVEL`
`CONFIG_CAN_LOG_LEVEL_DBG`	Debug
`CONFIG_CAN_LOG_LEVEL_ERR`	Error
`CONFIG_CAN_LOG_LEVEL_INF`	Info
`CONFIG_CAN_LOG_LEVEL_OFF`	Off
`CONFIG_CAN_LOG_LEVEL_WRN`	Warning
`CONFIG_CAN_LOOPBACK`	Loopback CAN driver
`CONFIG_CAN_LOOPBACK_DEV_NAME`	CAN loopback device name
`CONFIG_CAN_LOOPBACK_TX_MSGQ_SIZE`	TX message queue size
`CONFIG_CAN_LOOPBACK_TX_THREAD_PRIORITY`	TX thread priority
`CONFIG_CAN_LOOPBACK_TX_THREAD_STACK_SIZE`	TX thread stack size
`CONFIG_CAN_MAX_EXT_ID_FILTER`	Maximum number of ext ID filters
`CONFIG_CAN_MAX_FILTER`	Maximum number of concurrent active filters
`CONFIG_CAN_MAX_STD_ID_FILTER`	Maximum number of std ID filters
`CONFIG_CAN_MCAN`
`CONFIG_CAN_MCP2515`	MCP2515 CAN Driver
`CONFIG_CAN_MCP2515_INIT_PRIORITY`	Init priority
`CONFIG_CAN_MCP2515_INT_THREAD_PRIO`	Priority for interrupt handler
`CONFIG_CAN_MCP2515_INT_THREAD_STACK_SIZE`	Stack size for interrupt handler
`CONFIG_CAN_MCUX_FLEXCAN`	MCUX FlexCAN driver
`CONFIG_CAN_NET`	Enable 6loCAN network interface [EXPERIMENTAL]
`CONFIG_CAN_NET_INIT_PRIORITY`	CAN NET driver init priority
`CONFIG_CAN_NET_LOG_LEVEL`
`CONFIG_CAN_NET_LOG_LEVEL_DBG`	Debug
`CONFIG_CAN_NET_LOG_LEVEL_DEFAULT`	Default
`CONFIG_CAN_NET_LOG_LEVEL_ERR`	Error
`CONFIG_CAN_NET_LOG_LEVEL_INF`	Info
`CONFIG_CAN_NET_LOG_LEVEL_OFF`	Off
`CONFIG_CAN_NET_LOG_LEVEL_WRN`	Warning
`CONFIG_CAN_NET_NAME`	Network device name
`CONFIG_CAN_RCAR`	Renesas R-Car CAN Driver
`CONFIG_CAN_RCAR_MAX_FILTER`	Maximum number of concurrent active filters
`CONFIG_CAN_RX_TIMESTAMP`	Enable receiving timestamps
`CONFIG_CAN_SHELL`	Enable CAN Shell
`CONFIG_CAN_STM32`	STM32 CAN Driver
`CONFIG_CAN_STM32FD`	STM32 FDCAN driver
`CONFIG_CAN_STM32_CLOCK_DIVISOR`	CAN clock divisor
`CONFIG_CAN_WORKQ_FRAMES_BUF_CNT`	Work queue buffer frame count
`CONFIG_CAVS_ICTL`	CAVS Interrupt Logic
`CONFIG_CAVS_ICTL_0_OFFSET`	Parent interrupt number to which CAVS_0 maps
`CONFIG_CAVS_ICTL_1_OFFSET`	Parent interrupt number to which CAVS_1 maps
`CONFIG_CAVS_ICTL_2_OFFSET`	Parent interrupt number to which CAVS_2 maps
`CONFIG_CAVS_ICTL_3_OFFSET`	Parent interrupt number to which CAVS_3 maps
`CONFIG_CAVS_ICTL_INIT_PRIORITY`	CAVS ICTL Init priority
`CONFIG_CAVS_ISR_TBL_OFFSET`	Offset in the SW ISR Table
`CONFIG_CAVS_TIMER`	CAVS DSP Wall Clock Timer on Intel SoC
`CONFIG_CBKPROXY_IN_SLOTS`	Maximum number of RPC callback proxy input slots
`CONFIG_CBKPROXY_OUT_SLOTS`	Maximum number of RPC callback proxy output slots
`CONFIG_CBOR_ENCODER_NO_CHECK_USER`	No encoder checks for user args for validity
`CONFIG_CBOR_FLOATING_POINT`	Floating point support
`CONFIG_CBOR_HALF_FLOAT_TYPE`	Half float type support
`CONFIG_CBOR_PARSER_MAX_RECURSIONS`	Parser max recursions
`CONFIG_CBOR_PARSER_NO_STRICT_CHECKS`	No strict parser checks
`CONFIG_CBOR_PRETTY_PRINTING`	Implement pretty printing functionality
`CONFIG_CBOR_WITHOUT_OPEN_MEMSTREAM`	Without open memstream
`CONFIG_CBPRINTF_COMPLETE`	All selected features
`CONFIG_CBPRINTF_FP_ALWAYS_A`	Select %a format for all floating point specifications
`CONFIG_CBPRINTF_FP_A_SUPPORT`	Enable floating point %a conversions
`CONFIG_CBPRINTF_FP_SUPPORT`	Enable floating point formatting in cbprintf
`CONFIG_CBPRINTF_FULL_INTEGRAL`	Convert the full range of integer values
`CONFIG_CBPRINTF_LIBC_SUBSTS`	Generate C-library compatible functions using cbprintf
`CONFIG_CBPRINTF_NANO`	Space-optimized but feature-limited
`CONFIG_CBPRINTF_N_SPECIFIER`	Support %n specifications
`CONFIG_CBPRINTF_PACKAGE_LONGDOUBLE`	Support packaging of long doubles
`CONFIG_CBPRINTF_REDUCED_INTEGRAL`	Convert only integer values that fit in 32 bits
`CONFIG_CBPRINTF_STATIC_PACKAGE_CHECK_ALIGNMENT`	Validate alignment of a static package buffer
`CONFIG_CC13X2_CC26X2_BOOTLOADER_BACKDOOR_ENABLE`	ROM bootloader backdoor
`CONFIG_CC13X2_CC26X2_BOOTLOADER_BACKDOOR_LEVEL`	ROM bootloader backdoor level
`CONFIG_CC13X2_CC26X2_BOOTLOADER_BACKDOOR_PIN`	ROM bootloader backdoor pin
`CONFIG_CC13X2_CC26X2_BOOTLOADER_ENABLE`	ROM bootloader
`CONFIG_CC13X2_CC26X2_RTC_TIMER`	TI SimpleLink CC13x2/CC26x2 RTC timer
`CONFIG_CC310_BACKEND`
`CONFIG_CC312_BACKEND`
`CONFIG_CC3220SF_DEBUG`	Prepend debug header, disabling flash verification
`CONFIG_CC3235SF_DEBUG`	Prepend debug header, disabling flash verification
`CONFIG_CC3XX_ATOMIC_LOCK`	Use atomic variables for mutually exclusive access to CC3XX resources
`CONFIG_CC3XX_BACKEND`	Use cc3xx backend
`CONFIG_CC3XX_HW_MUTEX_LOCK`	Use hardware mutex for mutually exclusive access to CC3XX resources
`CONFIG_CC3XX_MBEDTLS_AES_C`	cc310 (AES-128)
`CONFIG_CC3XX_MBEDTLS_CCM_C`	cc310 (Using AES-128)
`CONFIG_CC3XX_MBEDTLS_CHACHA20_C`
`CONFIG_CC3XX_MBEDTLS_CHACHAPOLY_C`
`CONFIG_CC3XX_MBEDTLS_CIPHER_MODE_CBC`
`CONFIG_CC3XX_MBEDTLS_CIPHER_MODE_CTR`
`CONFIG_CC3XX_MBEDTLS_CIPHER_MODE_ECB`
`CONFIG_CC3XX_MBEDTLS_CMAC_C`
`CONFIG_CC3XX_MBEDTLS_DHM_C`	cc3xx
`CONFIG_CC3XX_MBEDTLS_ECDH_C`
`CONFIG_CC3XX_MBEDTLS_ECDSA_C`
`CONFIG_CC3XX_MBEDTLS_ECJPAKE_C`
`CONFIG_CC3XX_MBEDTLS_ECP_C`
`CONFIG_CC3XX_MBEDTLS_GCM_C`
`CONFIG_CC3XX_MBEDTLS_POLY1305_C`
`CONFIG_CC3XX_MBEDTLS_RSA_C`
`CONFIG_CC3XX_MBEDTLS_SHA1_C`
`CONFIG_CC3XX_MBEDTLS_SHA256_C`
`CONFIG_CC3XX_MUTEX_LOCK`	Use mutex variables for mutually exclusive access to CC3XX resources
`CONFIG_CC3XX_SINGLE_BACKEND`
`CONFIG_CCS811`	CCS811 Digital Gas Sensor
`CONFIG_CCS811_DRIVE_MODE_0`	Measurements disabled
`CONFIG_CCS811_DRIVE_MODE_1`	Measurement every second
`CONFIG_CCS811_DRIVE_MODE_2`	Measurement every ten seconds
`CONFIG_CCS811_DRIVE_MODE_3`	Measurement every sixty seconds
`CONFIG_CCS811_DRIVE_MODE_4`	Measurement every 250 milliseconds
`CONFIG_CCS811_THREAD_PRIORITY`	Thread priority
`CONFIG_CCS811_THREAD_STACK_SIZE`	Thread stack size
`CONFIG_CCS811_TRIGGER`
`CONFIG_CCS811_TRIGGER_GLOBAL_THREAD`	Use global thread
`CONFIG_CCS811_TRIGGER_NONE`	No trigger
`CONFIG_CCS811_TRIGGER_OWN_THREAD`	Use own thread
`CONFIG_CDC_ACM_BULK_EP_MPS`
`CONFIG_CDC_ACM_DTE_RATE_CALLBACK_SUPPORT`	Support callbacks when the USB host changes the virtual baud rate
`CONFIG_CDC_ACM_IAD`	Force using Interface Association Descriptor
`CONFIG_CDC_ACM_INTERRUPT_EP_MPS`
`CONFIG_CDC_ECM_BULK_EP_MPS`
`CONFIG_CDC_ECM_INTERRUPT_EP_MPS`
`CONFIG_CDC_EEM_BULK_EP_MPS`
`CONFIG_CDDL_GEN`	Support code generated by cddl-gen module
`CONFIG_CFB_LOG_LEVEL`
`CONFIG_CFB_LOG_LEVEL_DBG`	Debug
`CONFIG_CFB_LOG_LEVEL_ERR`	Error
`CONFIG_CFB_LOG_LEVEL_INF`	Info
`CONFIG_CFB_LOG_LEVEL_OFF`	Off
`CONFIG_CFB_LOG_LEVEL_WRN`	Warning
`CONFIG_CHARACTER_FRAMEBUFFER`	Character framebuffer for dot matrix displays
`CONFIG_CHARACTER_FRAMEBUFFER_SHELL`	Character Framebuffer shell
`CONFIG_CHARACTER_FRAMEBUFFER_SHELL_DRIVER_NAME`
`CONFIG_CHARACTER_FRAMEBUFFER_USE_DEFAULT_FONTS`	Use default fonts
`CONFIG_CHECK_BEFORE_READING`	Verify area before reading it
`CONFIG_CHIP`	Connected Home over IP protocol stack
`CONFIG_CHIP_BUILD_TESTS`	Build CHIP unit tests
`CONFIG_CHIP_DISABLE_CHIPOBLE_ADVERTISING_WHEN_PROVISIONED`	Disable CHIPoBLE advertising when device is fully provisioned
`CONFIG_CHIP_ENABLE_DNSSD_SRP`	Enable support for service registration
`CONFIG_CHIP_ENABLE_DNS_CLIENT`	Enable support for DNS client
`CONFIG_CHIP_ENABLE_PAIRING_AUTOSTART`	Enable pairing autostart
`CONFIG_CHIP_LIB_SHELL`	Enable CHIP shell library
`CONFIG_CHIP_NFC_COMMISSIONING`	Enable NFC commissioning support
`CONFIG_CHIP_OPENTHREAD_CONFIG`	Custom OpenThread configuration file
`CONFIG_CHIP_PROJECT_CONFIG`	Project configuration file for CHIP
`CONFIG_CHIP_PW_RPC`	Enable Pigweed RPC library
`CONFIG_CHOICE_CC3XX_MBEDTLS_CHACHA20_C`	cc3xx
`CONFIG_CHOICE_CC3XX_MBEDTLS_CHACHAPOLY_C`	cc3xx
`CONFIG_CHOICE_CC3XX_MBEDTLS_CMAC_C`	cc310 (CMAC using AES-128)
`CONFIG_CHOICE_CC3XX_MBEDTLS_ECP_C`	cc3xx
`CONFIG_CHOICE_CC3XX_MBEDTLS_POLY1305_C`	cc3xx
`CONFIG_CHOICE_CC3XX_MBEDTLS_RSA_C`	cc3xx
`CONFIG_CHOICE_CC3XX_MBEDTLS_SHA1_C`	cc3xx
`CONFIG_CHOICE_CC3XX_MBEDTLS_SHA256_C`	cc3xx
`CONFIG_CHOICE_OBERON_MBEDTLS_CHACHA20_C`	nrf_oberon
`CONFIG_CHOICE_OBERON_MBEDTLS_CMAC_C`	nrf_oberon (CMAC using AES-128, AES-192, AES-256)
`CONFIG_CHOICE_OBERON_MBEDTLS_ECP_C`	nrf_oberon
`CONFIG_CHOICE_OBERON_MBEDTLS_POLY1305_C`	nrf_oberon
`CONFIG_CHOICE_OBERON_MBEDTLS_SHA1_C`	nrf_oberon
`CONFIG_CHOICE_OBERON_MBEDTLS_SHA256_C`	nrf_oberon
`CONFIG_CHOICE_PSA_EITS_BACKEND_ZEPHYR_SETTINGS`	Zephyr Settings
`CONFIG_CHOICE_VANILLA_MBEDTLS_CHACHA20_C`	Original mbed TLS
`CONFIG_CHOICE_VANILLA_MBEDTLS_CHACHAPOLY_C`	Original mbed TLS
`CONFIG_CHOICE_VANILLA_MBEDTLS_CMAC_C`	mbed TLS (CMAC using AES-128, AES-192, AES-256)
`CONFIG_CHOICE_VANILLA_MBEDTLS_ECP_C`	Original mbed TLS
`CONFIG_CHOICE_VANILLA_MBEDTLS_POLY1305_C`	Original mbed TLS
`CONFIG_CHOICE_VANILLA_MBEDTLS_RSA_C`	Original mbed TLS
`CONFIG_CHOICE_VANILLA_MBEDTLS_SHA1_C`	Original mbed TLS
`CONFIG_CHOICE_VANILLA_MBEDTLS_SHA256_C`	Original mbed TLS
`CONFIG_CIVETWEB`	Civetweb Support
`CONFIG_CJSON_LIB`	cJSON library
`CONFIG_CLEANUP_INTERMEDIATE_FILES`	Remove all intermediate files
`CONFIG_CLIENT_ID_MAX_LEN`	MQTT Client ID length
`CONFIG_CLOCK_CONTROL`	Hardware clock controller support
`CONFIG_CLOCK_CONTROL_BEETLE`	BEETLE Clock Control
`CONFIG_CLOCK_CONTROL_BEETLE_DEVICE_INIT_PRIORITY`	Clock Control Device Priority
`CONFIG_CLOCK_CONTROL_BEETLE_ENABLE_PLL`	Enable PLL on Beetle
`CONFIG_CLOCK_CONTROL_ESP32`	ESP32 Clock driver
`CONFIG_CLOCK_CONTROL_LITEX`	LiteX MMCM clock control
`CONFIG_CLOCK_CONTROL_LOG_LEVEL`
`CONFIG_CLOCK_CONTROL_LOG_LEVEL_DBG`	Debug
`CONFIG_CLOCK_CONTROL_LOG_LEVEL_ERR`	Error
`CONFIG_CLOCK_CONTROL_LOG_LEVEL_INF`	Info
`CONFIG_CLOCK_CONTROL_LOG_LEVEL_OFF`	Off
`CONFIG_CLOCK_CONTROL_LOG_LEVEL_WRN`	Warning
`CONFIG_CLOCK_CONTROL_LPC11U6X`	LPC11U6X Reset and clock control
`CONFIG_CLOCK_CONTROL_LPC11U6X_ENABLE_SRAM1`	Enable SRAM1
`CONFIG_CLOCK_CONTROL_LPC11U6X_ENABLE_USB_RAM`	Enable USB RAM
`CONFIG_CLOCK_CONTROL_LPC11U6X_PLL_SRC_IRC`	IRC
`CONFIG_CLOCK_CONTROL_LPC11U6X_PLL_SRC_SYSOSC`	SYSOSC
`CONFIG_CLOCK_CONTROL_MCHP_XEC`	MCHP XEC PCR clock control driver
`CONFIG_CLOCK_CONTROL_MCUX_CCM`	MCUX CCM driver
`CONFIG_CLOCK_CONTROL_MCUX_CCM_REV2`	MCUX CCM Rev 2 driver
`CONFIG_CLOCK_CONTROL_MCUX_MCG`	MCUX MCG driver
`CONFIG_CLOCK_CONTROL_MCUX_PCC`	MCUX PCC driver
`CONFIG_CLOCK_CONTROL_MCUX_SCG`	MCUX SCG driver
`CONFIG_CLOCK_CONTROL_MCUX_SIM`	MCUX SIM driver
`CONFIG_CLOCK_CONTROL_MCUX_SYSCON`	MCUX LPC clock driver
`CONFIG_CLOCK_CONTROL_MPSL`
`CONFIG_CLOCK_CONTROL_NPCX`	NPCX clock controller driver
`CONFIG_CLOCK_CONTROL_NPCX_EXTERNAL_SRC`	Generate LFCLK by on-chip Crystal Oscillator
`CONFIG_CLOCK_CONTROL_NRF`	NRF Clock controller support
`CONFIG_CLOCK_CONTROL_NRF_ACCURACY`
`CONFIG_CLOCK_CONTROL_NRF_CALIBRATION_DEBUG`	Calibration instrumentation
`CONFIG_CLOCK_CONTROL_NRF_CALIBRATION_LF_ALWAYS_ON`	LF clock is always on
`CONFIG_CLOCK_CONTROL_NRF_CALIBRATION_MAX_SKIP`	Maximum number of calibration skips
`CONFIG_CLOCK_CONTROL_NRF_CALIBRATION_PERIOD`	Calibration opportunity period in milliseconds
`CONFIG_CLOCK_CONTROL_NRF_CALIBRATION_TEMP_DIFF`	Temperature change triggering calibration (in 0.25 degree units)
`CONFIG_CLOCK_CONTROL_NRF_FORCE_ALT`
`CONFIG_CLOCK_CONTROL_NRF_K32SRC_100PPM`	76 ppm to 100 ppm
`CONFIG_CLOCK_CONTROL_NRF_K32SRC_150PPM`	101 ppm to 150 ppm
`CONFIG_CLOCK_CONTROL_NRF_K32SRC_20PPM`	0 ppm to 20 ppm
`CONFIG_CLOCK_CONTROL_NRF_K32SRC_250PPM`	151 ppm to 250 ppm
`CONFIG_CLOCK_CONTROL_NRF_K32SRC_30PPM`	21 ppm to 30 ppm
`CONFIG_CLOCK_CONTROL_NRF_K32SRC_500PPM`	251 ppm to 500 ppm
`CONFIG_CLOCK_CONTROL_NRF_K32SRC_50PPM`	31 ppm to 50 ppm
`CONFIG_CLOCK_CONTROL_NRF_K32SRC_75PPM`	51 ppm to 75 ppm
`CONFIG_CLOCK_CONTROL_NRF_K32SRC_EXT_FULL_SWING`	External full swing
`CONFIG_CLOCK_CONTROL_NRF_K32SRC_EXT_LOW_SWING`	External low swing
`CONFIG_CLOCK_CONTROL_NRF_K32SRC_RC`	RC Oscillator
`CONFIG_CLOCK_CONTROL_NRF_K32SRC_RC_CALIBRATION`	Enable LF clock calibration
`CONFIG_CLOCK_CONTROL_NRF_K32SRC_SYNTH`	Synthesized from HFCLK
`CONFIG_CLOCK_CONTROL_NRF_K32SRC_XTAL`	Crystal Oscillator
`CONFIG_CLOCK_CONTROL_NRF_SHELL`	Shell commands
`CONFIG_CLOCK_CONTROL_NRF_USES_TEMP_SENSOR`
`CONFIG_CLOCK_CONTROL_RCAR_CPG_MSSR`	RCar CPG MSSR driver
`CONFIG_CLOCK_CONTROL_RV32M1_PCC`	RV32M1 PCC driver
`CONFIG_CLOCK_CONTROL_STM32_CUBE`	STM32 Reset & Clock Control
`CONFIG_CLOCK_CONTROL_STM32_DEVICE_INIT_PRIORITY`	Clock Control Device Priority
`CONFIG_CLOCK_CONTROL_STM32_HAS_DTS`
`CONFIG_CLOCK_STM32_AHB3_PRESCALER`	AHB3 HCLK prescaler
`CONFIG_CLOCK_STM32_AHB4_PRESCALER`	AHB4 HCLK prescaler
`CONFIG_CLOCK_STM32_AHB_PRESCALER`	AHB prescaler
`CONFIG_CLOCK_STM32_APB1_PRESCALER`	APB1 prescaler
`CONFIG_CLOCK_STM32_APB2_PRESCALER`	APB2 prescaler
`CONFIG_CLOCK_STM32_CPU1_PRESCALER`	CPU1 HCLK prescaler
`CONFIG_CLOCK_STM32_CPU2_PRESCALER`	CPU2 HCLK prescaler
`CONFIG_CLOCK_STM32_D1CPRE`	D1 Domain, CPU1 clock prescaler
`CONFIG_CLOCK_STM32_D1PPRE`	D1 DOMAIN, APB3 prescaler
`CONFIG_CLOCK_STM32_D2PPRE1`	APB1 prescaler
`CONFIG_CLOCK_STM32_D2PPRE2`	D2 DOMAIN, APB2 prescaler
`CONFIG_CLOCK_STM32_D3PPRE`	APB4 prescaler
`CONFIG_CLOCK_STM32_HPRE`	hclk prescaler, D2 domain (CPU2) Clock prescaler
`CONFIG_CLOCK_STM32_HSE_BYPASS`	HSE bypass
`CONFIG_CLOCK_STM32_HSE_CLOCK`	HSE clock value
`CONFIG_CLOCK_STM32_HSI_DIVISOR`	HSI Divisor
`CONFIG_CLOCK_STM32_LSE`	Low-speed external clock
`CONFIG_CLOCK_STM32_MCO1_DIV`	MCO1 prescaler
`CONFIG_CLOCK_STM32_MCO1_SRC_HSE`	HSE
`CONFIG_CLOCK_STM32_MCO1_SRC_HSI`	HSI
`CONFIG_CLOCK_STM32_MCO1_SRC_LSE`	LSE
`CONFIG_CLOCK_STM32_MCO1_SRC_NOCLOCK`	NOCLOCK
`CONFIG_CLOCK_STM32_MCO1_SRC_PLLCLK`	PLLCLK
`CONFIG_CLOCK_STM32_MCO2_DIV`	MCO2 prescaler
`CONFIG_CLOCK_STM32_MCO2_SRC_HSE`	HSE
`CONFIG_CLOCK_STM32_MCO2_SRC_NOCLOCK`	NOCLOCK
`CONFIG_CLOCK_STM32_MCO2_SRC_PLLCLK`	PLLCLK
`CONFIG_CLOCK_STM32_MCO2_SRC_PLLI2S`	PLLI2S
`CONFIG_CLOCK_STM32_MCO2_SRC_SYSCLK`	SYSCLK
`CONFIG_CLOCK_STM32_MSI_PLL_MODE`	MSI PLL MODE
`CONFIG_CLOCK_STM32_MSI_RANGE`	MSI frequency range
`CONFIG_CLOCK_STM32_PLL3_ENABLE`	Enable PLL3
`CONFIG_CLOCK_STM32_PLL3_M_DIVISOR`	PLL3 divisor
`CONFIG_CLOCK_STM32_PLL3_N_MULTIPLIER`	PLL3 VCO multiplier
`CONFIG_CLOCK_STM32_PLL3_P_DIVISOR`	PLL3 P Divisor
`CONFIG_CLOCK_STM32_PLL3_P_ENABLE`	Enable PLL3 P output
`CONFIG_CLOCK_STM32_PLL3_Q_DIVISOR`	PLL3 Q Divisor
`CONFIG_CLOCK_STM32_PLL3_Q_ENABLE`	Enable PLL3 Q output
`CONFIG_CLOCK_STM32_PLL3_R_DIVISOR`	PLL3 R Divisor
`CONFIG_CLOCK_STM32_PLL3_R_ENABLE`	Enable PLL3 R output
`CONFIG_CLOCK_STM32_PLL_DIVISOR`	PLL divisor
`CONFIG_CLOCK_STM32_PLL_MULTIPLIER`	PLL multiplier
`CONFIG_CLOCK_STM32_PLL_M_DIVISOR`	Division factor for PLL VCO input clock
`CONFIG_CLOCK_STM32_PLL_N_MULTIPLIER`	Multiplier factor for PLL VCO output clock
`CONFIG_CLOCK_STM32_PLL_PREDIV`	PREDIV Prescaler
`CONFIG_CLOCK_STM32_PLL_PREDIV1`	PREDIV1 Prescaler
`CONFIG_CLOCK_STM32_PLL_P_DIVISOR`	PLL division factor for main system clock
`CONFIG_CLOCK_STM32_PLL_Q_DIVISOR`	Division factor for OTG FS, SDIO and RNG clocks
`CONFIG_CLOCK_STM32_PLL_R_DIVISOR`	PLL R Divisor
`CONFIG_CLOCK_STM32_PLL_SRC_CSI`	CSI
`CONFIG_CLOCK_STM32_PLL_SRC_HSE`	HSE
`CONFIG_CLOCK_STM32_PLL_SRC_HSI`	HSI
`CONFIG_CLOCK_STM32_PLL_SRC_MSI`	MSI
`CONFIG_CLOCK_STM32_PLL_SRC_PLL2`	PLL2
`CONFIG_CLOCK_STM32_PLL_XTPRE`	HSE to PLL /2 prescaler
`CONFIG_CLOCK_STM32_SYSCLK_SRC_CSI`	CSI
`CONFIG_CLOCK_STM32_SYSCLK_SRC_HSE`	HSE
`CONFIG_CLOCK_STM32_SYSCLK_SRC_HSI`	HSI
`CONFIG_CLOCK_STM32_SYSCLK_SRC_MSI`	MSI
`CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL`	PLL
`CONFIG_CLOUD_API`	Cloud API
`CONFIG_CMSIS_DSP`	CMSIS-DSP Library Support
`CONFIG_CMSIS_DSP_AUTOVECTORIZE`	Auto Vectorize
`CONFIG_CMSIS_DSP_BASICMATH`	Basic Math Functions
`CONFIG_CMSIS_DSP_BAYES`	Bayesian Estimators
`CONFIG_CMSIS_DSP_COMPLEXMATH`	Complex Math Functions
`CONFIG_CMSIS_DSP_CONTROLLER`	Controller Functions
`CONFIG_CMSIS_DSP_DISTANCE`	Distance Functions
`CONFIG_CMSIS_DSP_FASTMATH`	Fast Math Functions
`CONFIG_CMSIS_DSP_FILTERING`	Filtering Functions
`CONFIG_CMSIS_DSP_LOOPUNROLL`	Loop Unrolling
`CONFIG_CMSIS_DSP_MATRIX`	Matrix Functions
`CONFIG_CMSIS_DSP_MATRIXCHECK`	Matrix Check
`CONFIG_CMSIS_DSP_NEON`	Neon Instruction Set
`CONFIG_CMSIS_DSP_ROUNDING`	Rounding
`CONFIG_CMSIS_DSP_STATISTICS`	Statistics Functions
`CONFIG_CMSIS_DSP_SUPPORT`	Support Functions
`CONFIG_CMSIS_DSP_SVM`	Support Vector Machine Functions
`CONFIG_CMSIS_DSP_TABLES`	Look-up Tables
`CONFIG_CMSIS_DSP_TABLES_ALL_FAST`	Include all fast interpolation tables
`CONFIG_CMSIS_DSP_TABLES_ALL_FFT`	Include all FFT tables
`CONFIG_CMSIS_DSP_TABLES_ARM_CMPLX_MAG_Q15`	cmplx mag q15
`CONFIG_CMSIS_DSP_TABLES_ARM_CMPLX_MAG_Q31`	cmplx mag q31
`CONFIG_CMSIS_DSP_TABLES_ARM_COS_F32`	cos f32
`CONFIG_CMSIS_DSP_TABLES_ARM_COS_Q15`	cos q15
`CONFIG_CMSIS_DSP_TABLES_ARM_COS_Q31`	cos q31
`CONFIG_CMSIS_DSP_TABLES_ARM_LMS_NORM_Q15`	lms norm q15
`CONFIG_CMSIS_DSP_TABLES_ARM_LMS_NORM_Q31`	lms norm q31
`CONFIG_CMSIS_DSP_TABLES_ARM_SIN_COS_F32`	sin cos f32
`CONFIG_CMSIS_DSP_TABLES_ARM_SIN_COS_Q31`	sin cos q31
`CONFIG_CMSIS_DSP_TABLES_ARM_SIN_F32`	sin f32
`CONFIG_CMSIS_DSP_TABLES_ARM_SIN_Q15`	sin q15
`CONFIG_CMSIS_DSP_TABLES_ARM_SIN_Q31`	sin q31
`CONFIG_CMSIS_DSP_TABLES_CFFT_F32_1024`	cfft f32 1024
`CONFIG_CMSIS_DSP_TABLES_CFFT_F32_128`	cfft f32 128
`CONFIG_CMSIS_DSP_TABLES_CFFT_F32_16`	cfft f32 16
`CONFIG_CMSIS_DSP_TABLES_CFFT_F32_2048`	cfft f32 2048
`CONFIG_CMSIS_DSP_TABLES_CFFT_F32_256`	cfft f32 256
`CONFIG_CMSIS_DSP_TABLES_CFFT_F32_32`	cfft f32 32
`CONFIG_CMSIS_DSP_TABLES_CFFT_F32_4096`	cfft f32 4096
`CONFIG_CMSIS_DSP_TABLES_CFFT_F32_512`	cfft f32 512
`CONFIG_CMSIS_DSP_TABLES_CFFT_F32_64`	cfft f32 64
`CONFIG_CMSIS_DSP_TABLES_CFFT_F64_1024`	cfft f64 1024
`CONFIG_CMSIS_DSP_TABLES_CFFT_F64_128`	cfft f64 128
`CONFIG_CMSIS_DSP_TABLES_CFFT_F64_16`	cfft f64 16
`CONFIG_CMSIS_DSP_TABLES_CFFT_F64_2048`	cfft f64 2048
`CONFIG_CMSIS_DSP_TABLES_CFFT_F64_256`	cfft f64 256
`CONFIG_CMSIS_DSP_TABLES_CFFT_F64_32`	cfft f64 32
`CONFIG_CMSIS_DSP_TABLES_CFFT_F64_4096`	cfft f64 4096
`CONFIG_CMSIS_DSP_TABLES_CFFT_F64_512`	cfft f64 512
`CONFIG_CMSIS_DSP_TABLES_CFFT_F64_64`	cfft f64 64
`CONFIG_CMSIS_DSP_TABLES_CFFT_Q15_1024`	cfft q15 1024
`CONFIG_CMSIS_DSP_TABLES_CFFT_Q15_128`	cfft q15 128
`CONFIG_CMSIS_DSP_TABLES_CFFT_Q15_16`	cfft q15 16
`CONFIG_CMSIS_DSP_TABLES_CFFT_Q15_2048`	cfft q15 2048
`CONFIG_CMSIS_DSP_TABLES_CFFT_Q15_256`	cfft q15 256
`CONFIG_CMSIS_DSP_TABLES_CFFT_Q15_32`	cfft q15 32
`CONFIG_CMSIS_DSP_TABLES_CFFT_Q15_4096`	cfft q15 4096
`CONFIG_CMSIS_DSP_TABLES_CFFT_Q15_512`	cfft q15 512
`CONFIG_CMSIS_DSP_TABLES_CFFT_Q15_64`	cfft q15 64
`CONFIG_CMSIS_DSP_TABLES_CFFT_Q31_1024`	cfft q31 1024
`CONFIG_CMSIS_DSP_TABLES_CFFT_Q31_128`	cfft q31 128
`CONFIG_CMSIS_DSP_TABLES_CFFT_Q31_16`	cfft q31 16
`CONFIG_CMSIS_DSP_TABLES_CFFT_Q31_2048`	cfft q31 2048
`CONFIG_CMSIS_DSP_TABLES_CFFT_Q31_256`	cfft q31 256
`CONFIG_CMSIS_DSP_TABLES_CFFT_Q31_32`	cfft q31 32
`CONFIG_CMSIS_DSP_TABLES_CFFT_Q31_4096`	cfft q31 4096
`CONFIG_CMSIS_DSP_TABLES_CFFT_Q31_512`	cfft q31 512
`CONFIG_CMSIS_DSP_TABLES_CFFT_Q31_64`	cfft q31 64
`CONFIG_CMSIS_DSP_TABLES_DCT4_F32_128`	dct4 f32 128
`CONFIG_CMSIS_DSP_TABLES_DCT4_F32_2048`	dct4 f32 2048
`CONFIG_CMSIS_DSP_TABLES_DCT4_F32_512`	dct4 f32 512
`CONFIG_CMSIS_DSP_TABLES_DCT4_F32_8192`	dct4 f32 8192
`CONFIG_CMSIS_DSP_TABLES_DCT4_Q15_128`	dct4 q15 128
`CONFIG_CMSIS_DSP_TABLES_DCT4_Q15_2048`	dct4 q15 2048
`CONFIG_CMSIS_DSP_TABLES_DCT4_Q15_512`	dct4 q15 512
`CONFIG_CMSIS_DSP_TABLES_DCT4_Q15_8192`	dct4 q15 8192
`CONFIG_CMSIS_DSP_TABLES_DCT4_Q31_128`	dct4 q31 128
`CONFIG_CMSIS_DSP_TABLES_DCT4_Q31_2048`	dct4 q31 2048
`CONFIG_CMSIS_DSP_TABLES_DCT4_Q31_512`	dct4 q31 512
`CONFIG_CMSIS_DSP_TABLES_DCT4_Q31_8192`	dct4 q31 8192
`CONFIG_CMSIS_DSP_TABLES_RFFT_F32_128`	rfft f32 128
`CONFIG_CMSIS_DSP_TABLES_RFFT_F32_2048`	rfft f32 2048
`CONFIG_CMSIS_DSP_TABLES_RFFT_F32_512`	rfft f32 512
`CONFIG_CMSIS_DSP_TABLES_RFFT_F32_8192`	rfft f32 8192
`CONFIG_CMSIS_DSP_TABLES_RFFT_F64_128`	rfft f64 128
`CONFIG_CMSIS_DSP_TABLES_RFFT_F64_2048`	rfft f64 2048
`CONFIG_CMSIS_DSP_TABLES_RFFT_F64_512`	rfft f64 512
`CONFIG_CMSIS_DSP_TABLES_RFFT_F64_8192`	rfft f64 8192
`CONFIG_CMSIS_DSP_TABLES_RFFT_FAST_F32_1024`	rfft fast f32 1024
`CONFIG_CMSIS_DSP_TABLES_RFFT_FAST_F32_128`	rfft fast f32 128
`CONFIG_CMSIS_DSP_TABLES_RFFT_FAST_F32_2048`	rfft fast f32 2048
`CONFIG_CMSIS_DSP_TABLES_RFFT_FAST_F32_256`	rfft fast f32 256
`CONFIG_CMSIS_DSP_TABLES_RFFT_FAST_F32_32`	rfft fast f32 32
`CONFIG_CMSIS_DSP_TABLES_RFFT_FAST_F32_4096`	rfft fast f32 4096
`CONFIG_CMSIS_DSP_TABLES_RFFT_FAST_F32_512`	rfft fast f32 512
`CONFIG_CMSIS_DSP_TABLES_RFFT_FAST_F32_64`	rfft fast f32 64
`CONFIG_CMSIS_DSP_TABLES_RFFT_FAST_F64_1024`	rfft fast f64 1024
`CONFIG_CMSIS_DSP_TABLES_RFFT_FAST_F64_128`	rfft fast f64 128
`CONFIG_CMSIS_DSP_TABLES_RFFT_FAST_F64_2048`	rfft fast f64 2048
`CONFIG_CMSIS_DSP_TABLES_RFFT_FAST_F64_256`	rfft fast f64 256
`CONFIG_CMSIS_DSP_TABLES_RFFT_FAST_F64_32`	rfft fast f64 32
`CONFIG_CMSIS_DSP_TABLES_RFFT_FAST_F64_4096`	rfft fast f64 4096
`CONFIG_CMSIS_DSP_TABLES_RFFT_FAST_F64_512`	rfft fast f64 512
`CONFIG_CMSIS_DSP_TABLES_RFFT_FAST_F64_64`	rfft fast f64 64
`CONFIG_CMSIS_DSP_TABLES_RFFT_Q15_1024`	rfft q15 1024
`CONFIG_CMSIS_DSP_TABLES_RFFT_Q15_128`	rfft q15 128
`CONFIG_CMSIS_DSP_TABLES_RFFT_Q15_2048`	rfft q15 2048
`CONFIG_CMSIS_DSP_TABLES_RFFT_Q15_256`	rfft q15 256
`CONFIG_CMSIS_DSP_TABLES_RFFT_Q15_32`	rfft q15 32
`CONFIG_CMSIS_DSP_TABLES_RFFT_Q15_4096`	rfft q15 4096
`CONFIG_CMSIS_DSP_TABLES_RFFT_Q15_512`	rfft q15 512
`CONFIG_CMSIS_DSP_TABLES_RFFT_Q15_64`	rfft q15 64
`CONFIG_CMSIS_DSP_TABLES_RFFT_Q15_8192`	rfft q15 8192
`CONFIG_CMSIS_DSP_TABLES_RFFT_Q31_1024`	rfft q31 1024
`CONFIG_CMSIS_DSP_TABLES_RFFT_Q31_128`	rfft q31 128
`CONFIG_CMSIS_DSP_TABLES_RFFT_Q31_2048`	rfft q31 2048
`CONFIG_CMSIS_DSP_TABLES_RFFT_Q31_256`	rfft q31 256
`CONFIG_CMSIS_DSP_TABLES_RFFT_Q31_32`	rfft q31 32
`CONFIG_CMSIS_DSP_TABLES_RFFT_Q31_4096`	rfft q31 4096
`CONFIG_CMSIS_DSP_TABLES_RFFT_Q31_512`	rfft q31 512
`CONFIG_CMSIS_DSP_TABLES_RFFT_Q31_64`	rfft q31 64
`CONFIG_CMSIS_DSP_TABLES_RFFT_Q31_8192`	rfft q31 8192
`CONFIG_CMSIS_DSP_TRANSFORM`	Transform Functions
`CONFIG_CMSIS_MUTEX_MAX_COUNT`	Maximum mutex count in CMSIS application
`CONFIG_CMSIS_RTOS_V1`	CMSIS RTOS v1 API
`CONFIG_CMSIS_RTOS_V2`	CMSIS RTOS v2 API
`CONFIG_CMSIS_SEMAPHORE_MAX_COUNT`	Maximum semaphore count in CMSIS application
`CONFIG_CMSIS_THREAD_MAX_STACK_SIZE`	Max stack size threads can be allocated in CMSIS RTOS application
`CONFIG_CMSIS_TIMER_MAX_COUNT`	Maximum timer count in CMSIS application
`CONFIG_CMSIS_V2_EVT_FLAGS_MAX_COUNT`	Maximum event flags count in CMSIS RTOS V2 application
`CONFIG_CMSIS_V2_MEM_SLAB_MAX_COUNT`	Maximum mem slab count in CMSIS RTOS V2 application
`CONFIG_CMSIS_V2_MEM_SLAB_MAX_DYNAMIC_SIZE`	Maximum dynamic mem slab/pool size in CMSIS RTOS V2 application
`CONFIG_CMSIS_V2_MSGQ_MAX_COUNT`	Maximum message queue count in CMSIS RTOS V2 application
`CONFIG_CMSIS_V2_MSGQ_MAX_DYNAMIC_SIZE`	Maximum dynamic message queue size in CMSIS RTOS V2 application
`CONFIG_CMSIS_V2_MUTEX_MAX_COUNT`	Maximum mutex count in CMSIS RTOS V2 application
`CONFIG_CMSIS_V2_SEMAPHORE_MAX_COUNT`	Maximum semaphore count in CMSIS RTOS V2 application
`CONFIG_CMSIS_V2_THREAD_DYNAMIC_MAX_COUNT`	Maximum dynamic thread count in CMSIS RTOS V2 application
`CONFIG_CMSIS_V2_THREAD_DYNAMIC_STACK_SIZE`	Dynamic stack size threads are allocated in CMSIS RTOS V2 application
`CONFIG_CMSIS_V2_THREAD_MAX_COUNT`	Maximum thread count in CMSIS RTOS V2 application
`CONFIG_CMSIS_V2_THREAD_MAX_STACK_SIZE`	Max stack size threads can be allocated in CMSIS RTOS V2 application
`CONFIG_CMSIS_V2_TIMER_MAX_COUNT`	Maximum timer count in CMSIS RTOS V2 application
`CONFIG_CMU_HFCLK_HFRCO`	Internal high frequency RC oscillator
`CONFIG_CMU_HFCLK_HFXO`	External high frequency crystal oscillator
`CONFIG_CMU_HFCLK_LFXO`	External low frequency crystal oscillator
`CONFIG_CMU_HFRCO_FREQ`	Internal high frequency RC oscillator frequency
`CONFIG_CMU_HFXO_FREQ`	External high frequency oscillator frequency
`CONFIG_CMU_LFXO_FREQ`	External low frequency oscillator frequency
`CONFIG_COAP`	CoAP Support
`CONFIG_COAP_EXTENDED_OPTIONS_LEN`	Support for CoAP extended options
`CONFIG_COAP_EXTENDED_OPTIONS_LEN_VALUE`	CoAP extended options length value
`CONFIG_COAP_INIT_ACK_TIMEOUT_MS`	base length of the random generated initial ACK timeout in ms
`CONFIG_COAP_KEEP_USER_DATA`	Enable keeping user data in the CoAP packet
`CONFIG_COAP_LOG_LEVEL`
`CONFIG_COAP_LOG_LEVEL_DBG`	Debug
`CONFIG_COAP_LOG_LEVEL_DEFAULT`	Default
`CONFIG_COAP_LOG_LEVEL_ERR`	Error
`CONFIG_COAP_LOG_LEVEL_INF`	Info
`CONFIG_COAP_LOG_LEVEL_OFF`	Off
`CONFIG_COAP_LOG_LEVEL_WRN`	Warning
`CONFIG_COAP_RANDOMIZE_ACK_TIMEOUT`	Randomize initial ACK timeout, as specified in RFC 7252
`CONFIG_COAP_TEST_API_ENABLE`	Enable test API for CoAP unit tests
`CONFIG_COAP_URI_WILDCARD`	Enable wildcards in CoAP resource path
`CONFIG_COAP_UTILS`	Support for communication with CoAP
`CONFIG_COAP_UTILS_LOG_LEVEL`
`CONFIG_COAP_UTILS_LOG_LEVEL_DBG`	Debug
`CONFIG_COAP_UTILS_LOG_LEVEL_ERR`	Error
`CONFIG_COAP_UTILS_LOG_LEVEL_INF`	Info
`CONFIG_COAP_UTILS_LOG_LEVEL_OFF`	Off
`CONFIG_COAP_UTILS_LOG_LEVEL_WRN`	Warning
`CONFIG_COAP_WELL_KNOWN_BLOCK_WISE`	CoAP ./well-known/core services block wise support
`CONFIG_COAP_WELL_KNOWN_BLOCK_WISE_SIZE`	CoAP ./well-known/core services block wise support
`CONFIG_CODE_DATA_RELOCATION`	Relocate code/data sections
`CONFIG_CODE_DATA_RELOCATION_SRAM`	Relocate code/data sections to SRAM
`CONFIG_CODE_DENSITY`	Code Density Option
`CONFIG_CODE_FLEXSPI`	Link code into external FlexSPI-controlled memory
`CONFIG_CODE_FLEXSPI2`	Link code into internal FlexSPI-controlled memory
`CONFIG_CODE_ITCM`	Link code into internal instruction tightly coupled memory (ITCM)
`CONFIG_CODE_SEMC`	Link code into external SEMC-controlled memory
`CONFIG_CODE_SRAM0`	Link code into RAM_L memory (RAM_L)
`CONFIG_CODING_GUIDELINE_CHECK`	Enforce coding guideline rules
`CONFIG_COMPAT_INCLUDES`	Suppress warnings when using header shims
`CONFIG_COMPILER_COLOR_DIAGNOSTICS`	Enable colored diganostics
`CONFIG_COMPILER_ISA_THUMB2`	Compile C/C++ functions using Thumb-2 instruction set
`CONFIG_COMPILER_OPT`	Custom compiler options
`CONFIG_COMPRESSED_ISA`
`CONFIG_CONSOLE`	Console drivers
`CONFIG_CONSOLE_GETCHAR`	Character by character input and output
`CONFIG_CONSOLE_GETCHAR_BUFSIZE`	console_getchar() buffer size
`CONFIG_CONSOLE_GETLINE`	Line by line input
`CONFIG_CONSOLE_HANDLER`	Enable console input handler
`CONFIG_CONSOLE_HAS_DRIVER`
`CONFIG_CONSOLE_INPUT_MAX_LINE_LEN`	Console maximum input line length
`CONFIG_CONSOLE_PUTCHAR_BUFSIZE`	console_putchar() buffer size
`CONFIG_CONSOLE_SUBSYS`	Console subsystem/support routines [EXPERIMENTAL]
`CONFIG_COOP_ENABLED`
`CONFIG_CORE_E31`	Use E31 core
`CONFIG_CORTEX_M_DWT`	Enable and use the DWT
`CONFIG_CORTEX_M_NULL_POINTER_EXCEPTION`
`CONFIG_CORTEX_M_NULL_POINTER_EXCEPTION_PAGE_SIZE`	Size of paged unmapped to implement null pointer detection
`CONFIG_CORTEX_M_SYSTICK`	Cortex-M SYSTICK timer
`CONFIG_COUNTER`	Counter Drivers
`CONFIG_COUNTER_CMOS`	Counter driver for x86 CMOS/RTC clock
`CONFIG_COUNTER_ESP32`	ESP32 Counter Driver
`CONFIG_COUNTER_ESP32_PRESCALER`	Prescaling value for counter device
`CONFIG_COUNTER_ESP32_TG0_T0`	TG0_T0 enable/disable option
`CONFIG_COUNTER_ESP32_TG0_T1`	TG0_T1 enable/disable option
`CONFIG_COUNTER_ESP32_TG1_T0`	TG1_T0 enable/disable option
`CONFIG_COUNTER_ESP32_TG1_T1`	TG1_T1 enable/disable option
`CONFIG_COUNTER_GECKO_RTCC`	Silicon Labs Gecko Counter (RTCC) driver
`CONFIG_COUNTER_IMX_EPIT`	IMX EPIT driver
`CONFIG_COUNTER_LOG_LEVEL`
`CONFIG_COUNTER_LOG_LEVEL_DBG`	Debug
`CONFIG_COUNTER_LOG_LEVEL_ERR`	Error
`CONFIG_COUNTER_LOG_LEVEL_INF`	Info
`CONFIG_COUNTER_LOG_LEVEL_OFF`	Off
`CONFIG_COUNTER_LOG_LEVEL_WRN`	Warning
`CONFIG_COUNTER_MAXIM_DS3231`	Maxim DS3231 RTC/TCXO
`CONFIG_COUNTER_MAXIM_DS3231_INIT_PRIORITY`	Init priority
`CONFIG_COUNTER_MCUX_GPT`	MCUX GPT driver
`CONFIG_COUNTER_MCUX_LPC_RTC`	MCUX LPC RTC driver
`CONFIG_COUNTER_MCUX_LPTMR`	MCUX LPTMR driver
`CONFIG_COUNTER_MCUX_PIT`	MCUX PIT driver
`CONFIG_COUNTER_MCUX_RTC`	MCUX RTC driver
`CONFIG_COUNTER_NATIVE_POSIX`	Enable counter on COUNTER_0
`CONFIG_COUNTER_NATIVE_POSIX_FREQUENCY`	native_posix counter frequency in Hz
`CONFIG_COUNTER_NRF_RTC`
`CONFIG_COUNTER_NRF_TIMER`
`CONFIG_COUNTER_RTC0`	Enable Counter on RTC0
`CONFIG_COUNTER_RTC1`	Enable Counter on RTC1
`CONFIG_COUNTER_RTC2`	Enable Counter on RTC2
`CONFIG_COUNTER_RTC_CUSTOM_TOP_SUPPORT`
`CONFIG_COUNTER_RTC_STM32`	STM32 Counter RTC driver
`CONFIG_COUNTER_RTC_STM32_BACKUP_DOMAIN_RESET`	Do backup domain reset
`CONFIG_COUNTER_RTC_STM32_CLOCK_LSE`	LSE
`CONFIG_COUNTER_RTC_STM32_CLOCK_LSI`	LSI
`CONFIG_COUNTER_RTC_STM32_LSE_BYPASS`	LSE oscillator bypass
`CONFIG_COUNTER_RTC_STM32_LSE_DRIVE_HIGH`	High
`CONFIG_COUNTER_RTC_STM32_LSE_DRIVE_LOW`	Low
`CONFIG_COUNTER_RTC_STM32_LSE_DRIVE_MEDIUMHIGH`	Medium High
`CONFIG_COUNTER_RTC_STM32_LSE_DRIVE_MEDIUMLOW`	Medium Low
`CONFIG_COUNTER_RTC_STM32_LSE_DRIVE_STRENGTH`
`CONFIG_COUNTER_RTC_STM32_SAVE_VALUE_BETWEEN_RESETS`	Save rtc time value between resets
`CONFIG_COUNTER_RTC_WITH_PPI_WRAP`
`CONFIG_COUNTER_SAM0_TC32`	SAM0 series 32-bit basic timer driver
`CONFIG_COUNTER_SAM_TC`	Atmel SAM MCU family counter (TC) driver
`CONFIG_COUNTER_TIMER0`	Enable Counter on TIMER0
`CONFIG_COUNTER_TIMER1`	Enable Counter on TIMER1
`CONFIG_COUNTER_TIMER2`	Enable Counter on TIMER2
`CONFIG_COUNTER_TIMER3`	Enable Counter on TIMER3
`CONFIG_COUNTER_TIMER4`	Enable Counter on TIMER4
`CONFIG_COUNTER_XEC`	Microchip XEC series counter driver
`CONFIG_COUNTER_XLNX_AXI_TIMER`	Xilinx AXI Timer driver
`CONFIG_COVERAGE`	Create coverage data
`CONFIG_COVERAGE_DUMP`	Dump coverage data on exit
`CONFIG_COVERAGE_GCOV`	Create Coverage data from hardware platform
`CONFIG_CPLUSPLUS`	C++ support for the application
`CONFIG_CPU_AARCH64_CORTEX_R`
`CONFIG_CPU_APOLLO_LAKE`
`CONFIG_CPU_ARCEM`
`CONFIG_CPU_ARCHS`
`CONFIG_CPU_ATOM`
`CONFIG_CPU_CORTEX`
`CONFIG_CPU_CORTEX_A`
`CONFIG_CPU_CORTEX_A53`
`CONFIG_CPU_CORTEX_A72`
`CONFIG_CPU_CORTEX_M`
`CONFIG_CPU_CORTEX_M0`
`CONFIG_CPU_CORTEX_M0PLUS`
`CONFIG_CPU_CORTEX_M0_HAS_VECTOR_TABLE_REMAP`
`CONFIG_CPU_CORTEX_M1`
`CONFIG_CPU_CORTEX_M23`
`CONFIG_CPU_CORTEX_M3`
`CONFIG_CPU_CORTEX_M33`
`CONFIG_CPU_CORTEX_M4`
`CONFIG_CPU_CORTEX_M55`
`CONFIG_CPU_CORTEX_M7`
`CONFIG_CPU_CORTEX_M_HAS_BASEPRI`
`CONFIG_CPU_CORTEX_M_HAS_CMSE`
`CONFIG_CPU_CORTEX_M_HAS_DWT`
`CONFIG_CPU_CORTEX_M_HAS_PROGRAMMABLE_FAULT_PRIOS`
`CONFIG_CPU_CORTEX_M_HAS_SPLIM`
`CONFIG_CPU_CORTEX_M_HAS_SYSTICK`
`CONFIG_CPU_CORTEX_M_HAS_VTOR`
`CONFIG_CPU_CORTEX_R`
`CONFIG_CPU_CORTEX_R4`
`CONFIG_CPU_CORTEX_R5`
`CONFIG_CPU_CORTEX_R7`
`CONFIG_CPU_CORTEX_R82`
`CONFIG_CPU_EM4`
`CONFIG_CPU_EM4_DMIPS`
`CONFIG_CPU_EM4_FPUDA`
`CONFIG_CPU_EM4_FPUS`
`CONFIG_CPU_EM6`
`CONFIG_CPU_HAS_ARM_MPU`
`CONFIG_CPU_HAS_ARM_SAU`
`CONFIG_CPU_HAS_CUSTOM_FIXED_SOC_MPU_REGIONS`	Custom fixed SoC MPU region definition
`CONFIG_CPU_HAS_DCLS`
`CONFIG_CPU_HAS_FPU`
`CONFIG_CPU_HAS_FPU_DOUBLE_PRECISION`
`CONFIG_CPU_HAS_MMU`
`CONFIG_CPU_HAS_MPU`
`CONFIG_CPU_HAS_NRF_IDAU`
`CONFIG_CPU_HAS_NXP_MPU`
`CONFIG_CPU_HAS_TEE`
`CONFIG_CPU_HS3X`
`CONFIG_CPU_HS6X`
`CONFIG_CPU_LAKEMONT`
`CONFIG_CPU_LOAD`	Enable CPU load measurement
`CONFIG_CPU_LOAD_ALIGNED_CLOCKS`	Enable aligned clock sources
`CONFIG_CPU_LOAD_CMDS`	Enable shell commands
`CONFIG_CPU_LOAD_LOG_INTERVAL`	Logging interval for CPU load [ms]
`CONFIG_CPU_LOAD_LOG_LEVEL`
`CONFIG_CPU_LOAD_LOG_LEVEL_DBG`	Debug
`CONFIG_CPU_LOAD_LOG_LEVEL_ERR`	Error
`CONFIG_CPU_LOAD_LOG_LEVEL_INF`	Info
`CONFIG_CPU_LOAD_LOG_LEVEL_OFF`	Off
`CONFIG_CPU_LOAD_LOG_LEVEL_WRN`	Warning
`CONFIG_CPU_LOAD_LOG_PERIODIC`	Periodically log current CPU load
`CONFIG_CPU_LOAD_TIMER_0`	Timer 0
`CONFIG_CPU_LOAD_TIMER_1`	Timer 1
`CONFIG_CPU_LOAD_TIMER_2`	Timer 2
`CONFIG_CPU_LOAD_TIMER_3`	Timer 3
`CONFIG_CPU_LOAD_TIMER_4`	Timer 4
`CONFIG_CPU_LOAD_TIMER_INSTANCE`
`CONFIG_CPU_LOAD_USE_SHARED_DPPI_CHANNELS`	Use shared DPPI channels
`CONFIG_CPU_NIOS2_GEN2`
`CONFIG_CRYPTO`	Crypto Drivers [EXPERIMENTAL]
`CONFIG_CRYPTOCELL_CC310_USABLE`
`CONFIG_CRYPTOCELL_CC312_USABLE`
`CONFIG_CRYPTOCELL_FOR_TFM`
`CONFIG_CRYPTOCELL_USABLE`
`CONFIG_CRYPTO_ATAES132A`	Atmel ATAES132A 32k AES Serial EEPROM support
`CONFIG_CRYPTO_ATAES132A_DRV_NAME`	Driver’s name
`CONFIG_CRYPTO_ATAES132A_I2C_ADDR`	ATAES132A I2C address
`CONFIG_CRYPTO_ATAES132A_I2C_PORT_NAME`	I2C master controller port name
`CONFIG_CRYPTO_ATAES132A_I2C_SPEED_FAST`	Fast
`CONFIG_CRYPTO_ATAES132A_I2C_SPEED_STANDARD`	Standard
`CONFIG_CRYPTO_INIT_PRIORITY`	Crypto devices init priority
`CONFIG_CRYPTO_LOG_LEVEL`
`CONFIG_CRYPTO_LOG_LEVEL_DBG`	Debug
`CONFIG_CRYPTO_LOG_LEVEL_ERR`	Error
`CONFIG_CRYPTO_LOG_LEVEL_INF`	Info
`CONFIG_CRYPTO_LOG_LEVEL_OFF`	Off
`CONFIG_CRYPTO_LOG_LEVEL_WRN`	Warning
`CONFIG_CRYPTO_MBEDTLS_SHIM`	Enable mbedTLS shim driver [EXPERIMENTAL]
`CONFIG_CRYPTO_MBEDTLS_SHIM_DRV_NAME`	Device name for mbedTLS Pseudo device
`CONFIG_CRYPTO_MBEDTLS_SHIM_MAX_SESSION`	Maximum of sessions mbedTLS shim driver can handle
`CONFIG_CRYPTO_NRF_ECB`	nRF AES electronic codebook mode encryption
`CONFIG_CRYPTO_STM32`	STM32 Cryptographic Accelerator driver
`CONFIG_CRYPTO_STM32_MAX_SESSION`	Maximum of sessions STM32 crypto driver can handle
`CONFIG_CRYPTO_TINYCRYPT_SHIM`	Enable TinyCrypt shim driver [EXPERIMENTAL]
`CONFIG_CRYPTO_TINYCRYPT_SHIM_DRV_NAME`	Device name for TinyCrypt Pseudo device
`CONFIG_CRYPTO_TINYCRYPT_SHIM_MAX_SESSION`	Maximum of sessions TinyCrypt shim driver can handle
`CONFIG_CR_LF_TERMINATION`	CR+LF Termination
`CONFIG_CR_TERMINATION`	CR Termination
`CONFIG_CSPRING_ENABLED`
`CONFIG_CS_CTR_DRBG_PERSONALIZATION`	CTR-DRBG Personalization string
`CONFIG_CTR_DRBG_CSPRNG_GENERATOR`	Use CTR-DRBG CSPRNG
`CONFIG_CUSTOM_LINKER_SCRIPT`	Path to custom linker script
`CONFIG_CUSTOM_MBEDTLS_CFG_FILE`	Custom mbed TLS configuration file
`CONFIG_CUSTOM_OPENTHREAD_SECURITY`	Custom
`CONFIG_CUSTOM_PELION_SECURITY`	Custom
`CONFIG_CUSTOM_SECTION_ALIGN`	Custom Section Align
`CONFIG_CUSTOM_SECTION_MIN_ALIGN_SIZE`	Custom Section Align Size
`CONFIG_D0WD_PSRAM_CLK_IO`	PSRAM CLK IO number
`CONFIG_D0WD_PSRAM_CS_IO`	PSRAM CS IO number
`CONFIG_D2WD_PSRAM_CLK_IO`	PSRAM CLK IO number
`CONFIG_D2WD_PSRAM_CS_IO`	PSRAM CS IO number
`CONFIG_DAC`	DAC drivers
`CONFIG_DAC_DACX0508`	TI DACx0508 DAC driver
`CONFIG_DAC_DACX0508_INIT_PRIORITY`	Init priority
`CONFIG_DAC_DACX3608`	TI DACX3608 DAC driver
`CONFIG_DAC_DACX3608_INIT_PRIORITY`	Init priority
`CONFIG_DAC_LOG_LEVEL`
`CONFIG_DAC_LOG_LEVEL_DBG`	Debug
`CONFIG_DAC_LOG_LEVEL_ERR`	Error
`CONFIG_DAC_LOG_LEVEL_INF`	Info
`CONFIG_DAC_LOG_LEVEL_OFF`	Off
`CONFIG_DAC_LOG_LEVEL_WRN`	Warning
`CONFIG_DAC_MCP4725`	Microchip MCP4725 DAC driver
`CONFIG_DAC_MCP4725_INIT_PRIORITY`	Init priority
`CONFIG_DAC_MCUX_DAC`	NXP Kinetis MCUX DAC driver
`CONFIG_DAC_MCUX_DAC32`	NXP Kinetis MCUX DAC32 driver
`CONFIG_DAC_MCUX_DAC32_TESTOUT`	Enable DAC test output
`CONFIG_DAC_SAM0`	Atmel SAM0 series DAC Driver
`CONFIG_DAC_SHELL`	Enable DAC shell
`CONFIG_DAC_STM32`	STM32 DAC driver
`CONFIG_DATE_SHELL`	Enable date shell
`CONFIG_DATE_TIME`	Date time library
`CONFIG_DATE_TIME_IPV6`	Use IPv6
`CONFIG_DATE_TIME_LOG_LEVEL`
`CONFIG_DATE_TIME_LOG_LEVEL_DBG`	Debug
`CONFIG_DATE_TIME_LOG_LEVEL_ERR`	Error
`CONFIG_DATE_TIME_LOG_LEVEL_INF`	Info
`CONFIG_DATE_TIME_LOG_LEVEL_OFF`	Off
`CONFIG_DATE_TIME_LOG_LEVEL_WRN`	Warning
`CONFIG_DATE_TIME_MODEM`	Get date time from the nRF9160 onboard modem
`CONFIG_DATE_TIME_NTP`	Get date time from NTP servers
`CONFIG_DATE_TIME_NTP_QUERY_TIME_SECONDS`	Duration in which the library will query for NTP time, in seconds
`CONFIG_DATE_TIME_THREAD_SIZE`	Stack size of the thread maintaining date time
`CONFIG_DATE_TIME_UPDATE_INTERVAL_SECONDS`	Date time update interval, in seconds
`CONFIG_DCACHE_LINE_SIZE`	d-cache line size
`CONFIG_DCACHE_LINE_SIZE_DETECT`	Detect d-cache line size at runtime
`CONFIG_DEBUG`	Build kernel with debugging enabled
`CONFIG_DEBUG_COREDUMP`	Enable Core Dump
`CONFIG_DEBUG_COREDUMP_BACKEND_FLASH_PARTITION`	Use flash partition for coredump
`CONFIG_DEBUG_COREDUMP_BACKEND_LOGGING`	Use Logging subsystem for coredump
`CONFIG_DEBUG_COREDUMP_MEMORY_DUMP_LINKER_RAM`	RAM defined by linker section
`CONFIG_DEBUG_COREDUMP_MEMORY_DUMP_MIN`	Minimal
`CONFIG_DEBUG_COREDUMP_SHELL`	Enable Coredump shell
`CONFIG_DEBUG_INFO`	Enable system debugging information
`CONFIG_DEBUG_OPTIMIZATIONS`	Optimize debugging experience
`CONFIG_DEBUG_THREAD_INFO`	Thread awareness support
`CONFIG_DEMAND_PAGING`	Enable demand paging [EXPERIMENTAL]
`CONFIG_DEMAND_PAGING_ALLOW_IRQ`	Allow interrupts during page-ins/outs
`CONFIG_DEMAND_PAGING_STATS`	Gather Demand Paging Statistics
`CONFIG_DEMAND_PAGING_STATS_USING_TIMING_FUNCTIONS`	Use Timing Functions to Gather Demand Paging Statistics
`CONFIG_DEMAND_PAGING_THREAD_STATS`	Gather per Thread Demand Paging Statistics
`CONFIG_DEMAND_PAGING_TIMING_HISTOGRAM`	Gather Demand Paging Execution Timing Histogram
`CONFIG_DEMAND_PAGING_TIMING_HISTOGRAM_NUM_BINS`	Number of bins (buckets) in Demand Paging Timing Histogrm
`CONFIG_DEVICE_CONFIGURATION_DATA`	Enable device configuration data
`CONFIG_DEVICE_NAME_GATT_WRITABLE_AUTHEN`	Authentication required to write name by remote GATT clients
`CONFIG_DEVICE_NAME_GATT_WRITABLE_ENCRYPT`	Encryption required to write name by remote GATT clients
`CONFIG_DEVICE_POWER_MANAGEMENT`	Device Power Management
`CONFIG_DEVICE_SHELL`	Enable device shell
`CONFIG_DEVMEM_SHELL`	Enable devmem shell
`CONFIG_DFU_TARGET`	Device Firmware Upgrade target API
`CONFIG_DFU_TARGET_FULL_MODEM`	Full Modem update support
`CONFIG_DFU_TARGET_LOG_LEVEL`
`CONFIG_DFU_TARGET_LOG_LEVEL_DBG`	Debug
`CONFIG_DFU_TARGET_LOG_LEVEL_ERR`	Error
`CONFIG_DFU_TARGET_LOG_LEVEL_INF`	Info
`CONFIG_DFU_TARGET_LOG_LEVEL_OFF`	Off
`CONFIG_DFU_TARGET_LOG_LEVEL_WRN`	Warning
`CONFIG_DFU_TARGET_MCUBOOT`	MCUBoot update support
`CONFIG_DFU_TARGET_MCUBOOT_SAVE_PROGRESS`	Store write progress to flash (MCUboot) [DEPRECATED]
`CONFIG_DFU_TARGET_MODEM_DELTA`	Modem delta update support
`CONFIG_DFU_TARGET_MODEM_TIMEOUT`	Erase pending timeout
`CONFIG_DFU_TARGET_STREAM`	Generic DFU stream target
`CONFIG_DFU_TARGET_STREAM_SAVE_PROGRESS`	Store write progress to flash stream
`CONFIG_DHT`	DHT Temperature and Humidity Sensor
`CONFIG_DISABLE_FLASH_PATCH`	Disable Cortex-M4 Flash Patch capabilities
`CONFIG_DISABLE_SSBD`	Disable Speculative Store Bypass
`CONFIG_DISABLE_TCM_ECC`	Disable ECC on TCM
`CONFIG_DISK_ACCESS`	Disk Interface
`CONFIG_DISK_DRIVERS`	Disk Drivers
`CONFIG_DISK_DRIVER_FLASH`	Flash
`CONFIG_DISK_DRIVER_RAM`	RAM Disk
`CONFIG_DISK_DRIVER_SDMMC`	SDMMC card driver
`CONFIG_DISK_ERASE_BLOCK_SIZE`	Flash device erasable block size in hex
`CONFIG_DISK_FLASH_DEV_NAME`	Flash device name to be used as storage backend
`CONFIG_DISK_FLASH_ERASE_ALIGNMENT`	Flash device erase alignment in hex
`CONFIG_DISK_FLASH_MAX_RW_SIZE`	Flash device max read-write size in decimal
`CONFIG_DISK_FLASH_SECTOR_SIZE`	Flash device sector size
`CONFIG_DISK_FLASH_START`	Flash device start address in hex
`CONFIG_DISK_FLASH_VOLUME_NAME`	Flash mount point or drive name
`CONFIG_DISK_LOG_LEVEL`
`CONFIG_DISK_LOG_LEVEL_DBG`	Debug
`CONFIG_DISK_LOG_LEVEL_ERR`	Error
`CONFIG_DISK_LOG_LEVEL_INF`	Info
`CONFIG_DISK_LOG_LEVEL_OFF`	Off
`CONFIG_DISK_LOG_LEVEL_WRN`	Warning
`CONFIG_DISK_RAM_VOLUME_NAME`	RAM Disk mount point or drive name
`CONFIG_DISK_RAM_VOLUME_SIZE`	RAM Disk size in kilobytes
`CONFIG_DISK_VOLUME_SIZE`	Flash device volume size in hex
`CONFIG_DISPLAY`	Display Drivers
`CONFIG_DISPLAY_LOG_LEVEL`
`CONFIG_DISPLAY_LOG_LEVEL_DBG`	Debug
`CONFIG_DISPLAY_LOG_LEVEL_ERR`	Error
`CONFIG_DISPLAY_LOG_LEVEL_INF`	Info
`CONFIG_DISPLAY_LOG_LEVEL_OFF`	Off
`CONFIG_DISPLAY_LOG_LEVEL_WRN`	Warning
`CONFIG_DISPLAY_MCUX_ELCDIF`	MCUX eLCDIF driver
`CONFIG_DK_LIBRARY`	Button and LED Library for Nordic DKs
`CONFIG_DK_LIBRARY_BUTTON_SCAN_INTERVAL`	Scanning interval of buttons in milliseconds
`CONFIG_DK_LIBRARY_DYNAMIC_BUTTON_HANDLERS`	Enable the runtime assignable button handler API
`CONFIG_DK_LIBRARY_INVERT_BUTTONS`	Invert buttons pins on DK
`CONFIG_DK_LIBRARY_INVERT_LEDS`	Invert LED pins on DK
`CONFIG_DK_LIBRARY_LOG_LEVEL`
`CONFIG_DK_LIBRARY_LOG_LEVEL_DBG`	Debug
`CONFIG_DK_LIBRARY_LOG_LEVEL_ERR`	Error
`CONFIG_DK_LIBRARY_LOG_LEVEL_INF`	Info
`CONFIG_DK_LIBRARY_LOG_LEVEL_OFF`	Off
`CONFIG_DK_LIBRARY_LOG_LEVEL_WRN`	Warning
`CONFIG_DMA`	DMA driver Configuration
`CONFIG_DMAMUX_STM32`
`CONFIG_DMA_64BIT`	DMA 64 bit address support
`CONFIG_DMA_DW`	Enable DesignWare DMA driver
`CONFIG_DMA_IPROC_PAX`	Broadcom PAX(PCIE<->AXI) DMA driver
`CONFIG_DMA_IPROC_PAX_DEBUG`	PAX DMA paranoid debug checks
`CONFIG_DMA_IPROC_PAX_DOORBELL_MODE`	PAX DMA Ring door bell mode
`CONFIG_DMA_IPROC_PAX_IRQ_SYNC`	PAX DMA synchronous API with interrupt support
`CONFIG_DMA_IPROC_PAX_POLL_MODE`	PAX DMA API in polling mode
`CONFIG_DMA_IPROC_PAX_TOGGLE_MODE`	PAX DMA Ring toggle mode
`CONFIG_DMA_IPROC_PAX_V2`	Broadcom PAX(PCIE<->AXI) DMA driver version 2
`CONFIG_DMA_LINK_QUEUE_SIZE`	number of transfer descriptors in a queue for SG mode
`CONFIG_DMA_LOG_LEVEL`
`CONFIG_DMA_LOG_LEVEL_DBG`	Debug
`CONFIG_DMA_LOG_LEVEL_ERR`	Error
`CONFIG_DMA_LOG_LEVEL_INF`	Info
`CONFIG_DMA_LOG_LEVEL_OFF`	Off
`CONFIG_DMA_LOG_LEVEL_WRN`	Warning
`CONFIG_DMA_MCUX_EDMA`	Enable MCUX DMA driver
`CONFIG_DMA_MCUX_LPC`	Enable MCUX LPC DMAC driver
`CONFIG_DMA_MCUX_TEST_SLOT_START`	test slot start num
`CONFIG_DMA_NIOS2_MSGDMA`	Nios-II Modular Scatter-Gather DMA(MSGDMA) driver
`CONFIG_DMA_PL330`	PL330 DMA driver
`CONFIG_DMA_SAM0`	Atmel SAM0 series DMAC driver
`CONFIG_DMA_SAM_XDMAC`	Atmel SAM DMA (XDMAC) driver
`CONFIG_DMA_STM32`	Enable STM32 DMA driver
`CONFIG_DMA_STM32_SHARED_IRQS`
`CONFIG_DMA_STM32_V1`
`CONFIG_DMA_STM32_V2`
`CONFIG_DMA_TCD_QUEUE_SIZE`	number of TCD in a queue for SG mode
`CONFIG_DNS_NUM_CONCUR_QUERIES`	Number of simultaneous DNS queries per one DNS context
`CONFIG_DNS_RESOLVER`	DNS resolver
`CONFIG_DNS_RESOLVER_ADDITIONAL_BUF_CTR`	Additional DNS buffers
`CONFIG_DNS_RESOLVER_ADDITIONAL_QUERIES`	Additional DNS queries
`CONFIG_DNS_RESOLVER_AI_MAX_ENTRIES`	Maximum number of IP addresses for DNS name
`CONFIG_DNS_RESOLVER_LOG_LEVEL`
`CONFIG_DNS_RESOLVER_LOG_LEVEL_DBG`	Debug
`CONFIG_DNS_RESOLVER_LOG_LEVEL_DEFAULT`	Default
`CONFIG_DNS_RESOLVER_LOG_LEVEL_ERR`	Error
`CONFIG_DNS_RESOLVER_LOG_LEVEL_INF`	Info
`CONFIG_DNS_RESOLVER_LOG_LEVEL_OFF`	Off
`CONFIG_DNS_RESOLVER_LOG_LEVEL_WRN`	Warning
`CONFIG_DNS_RESOLVER_MAX_SERVERS`	Number of DNS server addresses
`CONFIG_DNS_SD`	Enable DNS Service Discovery
`CONFIG_DNS_SD_LOG_LEVEL`
`CONFIG_DNS_SD_LOG_LEVEL_DBG`	Debug
`CONFIG_DNS_SD_LOG_LEVEL_DEFAULT`	Default
`CONFIG_DNS_SD_LOG_LEVEL_ERR`	Error
`CONFIG_DNS_SD_LOG_LEVEL_INF`	Info
`CONFIG_DNS_SD_LOG_LEVEL_OFF`	Off
`CONFIG_DNS_SD_LOG_LEVEL_WRN`	Warning
`CONFIG_DNS_SERVER1`	DNS server 1
`CONFIG_DNS_SERVER2`	DNS server 2
`CONFIG_DNS_SERVER3`	DNS server 3
`CONFIG_DNS_SERVER4`	DNS server 4
`CONFIG_DNS_SERVER5`	DNS server 5
`CONFIG_DNS_SERVER_IP_ADDRESSES`	Set DNS server IP addresses
`CONFIG_DOMAIN_CPUAPP_BOARD`
`CONFIG_DOMAIN_CPUNET_BOARD`
`CONFIG_DOWNLOAD_CLIENT`	Download client
`CONFIG_DOWNLOAD_CLIENT_BUF_SIZE`	Buffer size (static)
`CONFIG_DOWNLOAD_CLIENT_COAP_BLOCK_SIZE`
`CONFIG_DOWNLOAD_CLIENT_COAP_BLOCK_SIZE_128`	128
`CONFIG_DOWNLOAD_CLIENT_COAP_BLOCK_SIZE_256`	256
`CONFIG_DOWNLOAD_CLIENT_COAP_BLOCK_SIZE_512`	512
`CONFIG_DOWNLOAD_CLIENT_HTTP_FRAG_SIZE`
`CONFIG_DOWNLOAD_CLIENT_HTTP_FRAG_SIZE_1024`	1024
`CONFIG_DOWNLOAD_CLIENT_HTTP_FRAG_SIZE_2048`	2048
`CONFIG_DOWNLOAD_CLIENT_HTTP_FRAG_SIZE_256`	256
`CONFIG_DOWNLOAD_CLIENT_HTTP_FRAG_SIZE_4096`	4096
`CONFIG_DOWNLOAD_CLIENT_HTTP_FRAG_SIZE_512`	512
`CONFIG_DOWNLOAD_CLIENT_IPV6`	Use IPv6 when possible
`CONFIG_DOWNLOAD_CLIENT_LOG_HEADERS`	Log protocol headers to console [Debug]
`CONFIG_DOWNLOAD_CLIENT_LOG_LEVEL`
`CONFIG_DOWNLOAD_CLIENT_LOG_LEVEL_DBG`	Debug
`CONFIG_DOWNLOAD_CLIENT_LOG_LEVEL_ERR`	Error
`CONFIG_DOWNLOAD_CLIENT_LOG_LEVEL_INF`	Info
`CONFIG_DOWNLOAD_CLIENT_LOG_LEVEL_OFF`	Off
`CONFIG_DOWNLOAD_CLIENT_LOG_LEVEL_WRN`	Warning
`CONFIG_DOWNLOAD_CLIENT_MAX_FILENAME_SIZE`	Maximum filename length (stack)
`CONFIG_DOWNLOAD_CLIENT_MAX_HOSTNAME_SIZE`	Maximum hostname length (stack)
`CONFIG_DOWNLOAD_CLIENT_RANGE_REQUESTS`	Always use HTTP Range requests
`CONFIG_DOWNLOAD_CLIENT_SHELL`	Enable shell
`CONFIG_DOWNLOAD_CLIENT_STACK_SIZE`	Thread stack size
`CONFIG_DOWNLOAD_CLIENT_TCP_SOCK_TIMEO_MS`	Receive timeout on TCP sockets, in milliseconds
`CONFIG_DOWNLOAD_CLIENT_UDP_SOCK_TIMEO_MS`	Receive timeout on UDP sockets, in milliseconds
`CONFIG_DPS310`	DPS310 sensor
`CONFIG_DPS310_PRESS_OSR_128X`	x128
`CONFIG_DPS310_PRESS_OSR_16X`	x16
`CONFIG_DPS310_PRESS_OSR_1X`	x1
`CONFIG_DPS310_PRESS_OSR_2X`	x2
`CONFIG_DPS310_PRESS_OSR_32X`	x32
`CONFIG_DPS310_PRESS_OSR_4X`	x4
`CONFIG_DPS310_PRESS_OSR_64X`	x64
`CONFIG_DPS310_PRESS_OSR_8X`	x8
`CONFIG_DPS310_TEMP_OSR_128X`	x128
`CONFIG_DPS310_TEMP_OSR_16X`	x16
`CONFIG_DPS310_TEMP_OSR_1X`	x1
`CONFIG_DPS310_TEMP_OSR_2X`	x2
`CONFIG_DPS310_TEMP_OSR_32X`	x32
`CONFIG_DPS310_TEMP_OSR_4X`	x4
`CONFIG_DPS310_TEMP_OSR_64X`	x64
`CONFIG_DPS310_TEMP_OSR_8X`	x8
`CONFIG_DSA_KSZ8794`	Enable support for KSZ8794
`CONFIG_DSA_KSZ8794_TAIL_TAGGING`	Enable support for tail tagging on KSZ8794
`CONFIG_DT_FLASH_WRITE_BLOCK_SIZE`
`CONFIG_DUMMY_DISPLAY`	Dummy display driver
`CONFIG_DUMMY_DISPLAY_DEV_NAME`	Dummy display device name
`CONFIG_DUMMY_DISPLAY_X_RES`	X resolution for dummy display
`CONFIG_DUMMY_DISPLAY_Y_RES`	Y resolution for dummy display
`CONFIG_DW_ICTL`	Designware Interrupt Controller
`CONFIG_DW_ICTL_INIT_PRIORITY`	Init priority for DW interrupt controller
`CONFIG_DW_ICTL_NAME`	Name for Designware Interrupt Controller
`CONFIG_DW_ICTL_OFFSET`	Parent interrupt number to which DW_ICTL maps
`CONFIG_DW_ISR_TBL_OFFSET`	Offset in the SW ISR Table
`CONFIG_DYNAMIC_DIRECT_INTERRUPTS`	Enable support for dynamic direct interrupts
`CONFIG_DYNAMIC_INTERRUPTS`	Enable installation of IRQs at runtime
`CONFIG_DYNAMIC_OBJECTS`	Allow kernel objects to be allocated at runtime
`CONFIG_EAGER_FPU_SHARING`
`CONFIG_EARLY_CONSOLE`	Send stdout at the earliest stage possible
`CONFIG_EC_HOST_CMD`	Support Embedded Controller host command handler subsystem
`CONFIG_EC_HOST_CMD_HANDLER_STACK_SIZE`	Stack size for the EC host command handler thread
`CONFIG_EC_HOST_CMD_HANDLER_TX_BUFFER`	Buffer size in bytes for TX buffer shared by all EC host commands
`CONFIG_EC_HOST_CMD_PERIPH`	Embedded Controller Host Command peripheral support
`CONFIG_EC_HOST_CMD_SIMULATOR`	Embedded Controller Host Command Peripheral Simulator
`CONFIG_EDAC`	Error Detection and Correction (EDAC) Drivers
`CONFIG_EDAC_ERROR_INJECT`	Enable EDAC Error Injection mechanism
`CONFIG_EDAC_IBECC`	In-Band ECC (IBECC)
`CONFIG_EDAC_LOG_LEVEL`
`CONFIG_EDAC_LOG_LEVEL_DBG`	Debug
`CONFIG_EDAC_LOG_LEVEL_ERR`	Error
`CONFIG_EDAC_LOG_LEVEL_INF`	Info
`CONFIG_EDAC_LOG_LEVEL_OFF`	Off
`CONFIG_EDAC_LOG_LEVEL_WRN`	Warning
`CONFIG_EDAC_SHELL`	Enable EDAC Shell
`CONFIG_EDGE_IMPULSE`	Enable Edge Impulse
`CONFIG_EDGE_IMPULSE_DOWNLOAD_ALWAYS`	Download Edge Impulse library on each build
`CONFIG_EDGE_IMPULSE_URI`	Edge Impulse library URI
`CONFIG_EEPROM`	EEPROM hardware support
`CONFIG_EEPROM_AT24`	Atmel AT24 (and compatible) I2C EEPROM support
`CONFIG_EEPROM_AT25`	Atmel AT25 (and compatible) SPI EEPROM support
`CONFIG_EEPROM_AT2X`
`CONFIG_EEPROM_AT2X_INIT_PRIORITY`	AT2X EEPROM init priority
`CONFIG_EEPROM_EMULATOR`	Emulated EEPROM driver
`CONFIG_EEPROM_EMULATOR_INIT_PRIORITY`	EEPROM emulator init priority
`CONFIG_EEPROM_LOG_LEVEL`
`CONFIG_EEPROM_LOG_LEVEL_DBG`	Debug
`CONFIG_EEPROM_LOG_LEVEL_ERR`	Error
`CONFIG_EEPROM_LOG_LEVEL_INF`	Info
`CONFIG_EEPROM_LOG_LEVEL_OFF`	Off
`CONFIG_EEPROM_LOG_LEVEL_WRN`	Warning
`CONFIG_EEPROM_LPC11U6X`	LPC11U6x EEPROM driver
`CONFIG_EEPROM_SHELL`	Enable EEPROM shell
`CONFIG_EEPROM_SHELL_BUFFER_SIZE`	EEPROM shell buffer size
`CONFIG_EEPROM_SIMULATOR`	Simulated EEPROM driver
`CONFIG_EEPROM_SIMULATOR_MIN_READ_TIME_US`	Minimum read time (µS)
`CONFIG_EEPROM_SIMULATOR_MIN_WRITE_TIME_US`	Minimum write time (µS)
`CONFIG_EEPROM_SIMULATOR_SIMULATE_TIMING`	Enable hardware timing simulation
`CONFIG_EEPROM_STM32`	STM32 EEPROM driver
`CONFIG_EI_WRAPPER`	Enable Edge Impulse wrapper
`CONFIG_EI_WRAPPER_DATA_BUF_SIZE`	Size of input data buffer
`CONFIG_EI_WRAPPER_DEBUG_MODE`	Run Edge Impulse library in debug mode
`CONFIG_EI_WRAPPER_LOG_LEVEL`
`CONFIG_EI_WRAPPER_LOG_LEVEL_DBG`	Debug
`CONFIG_EI_WRAPPER_LOG_LEVEL_ERR`	Error
`CONFIG_EI_WRAPPER_LOG_LEVEL_INF`	Info
`CONFIG_EI_WRAPPER_LOG_LEVEL_OFF`	Off
`CONFIG_EI_WRAPPER_LOG_LEVEL_WRN`	Warning
`CONFIG_EI_WRAPPER_THREAD_PRIORITY`	Priority of EI wrapper thread
`CONFIG_EI_WRAPPER_THREAD_STACK_SIZE`	Size of EI wrapper thread stack
`CONFIG_EMUL`	Emulation drivers
`CONFIG_EMUL_BMI160`	Emulate a Bosch BMI160 accelerometer
`CONFIG_EMUL_EEPROM_AT2X`	Emulate an Atmel AT24 I2C chip
`CONFIG_EMUL_ESPI_HOST`	Emulate an eSPI host
`CONFIG_EMUL_INIT_PRIORITY`	Init priority
`CONFIG_EMUL_LOG_LEVEL`
`CONFIG_EMUL_LOG_LEVEL_DBG`	Debug
`CONFIG_EMUL_LOG_LEVEL_ERR`	Error
`CONFIG_EMUL_LOG_LEVEL_INF`	Info
`CONFIG_EMUL_LOG_LEVEL_OFF`	Off
`CONFIG_EMUL_LOG_LEVEL_WRN`	Warning
`CONFIG_ENABLE_EXTENDED_IBRS`	Enable Extended IBRS
`CONFIG_ENABLE_HID_INT_OUT_EP`	Enable USB HID Device Interrupt OUT Endpoint
`CONFIG_ENABLE_ZIGBEE_FOTA_MAX_HW_VERSION`	Enable Zigbee OTA maximum hw version
`CONFIG_ENABLE_ZIGBEE_FOTA_MIN_HW_VERSION`	Enable Zigbee OTA minimum hw version
`CONFIG_ENS210`	ENS210 Digital Temperature and Humidity sensor
`CONFIG_ENS210_CRC_CHECK`	Enable CRC Check
`CONFIG_ENS210_HUMIDITY_CONTINUOUS`	Enable relative humidity measurements in continuous mode
`CONFIG_ENS210_HUMIDITY_OFF`	Disable relative humidity measurements
`CONFIG_ENS210_HUMIDITY_SINGLE`	Enable relative humidity measurements in single shot mode
`CONFIG_ENS210_MAX_READ_RETRIES`	Number of value reading retries
`CONFIG_ENS210_MAX_STAT_RETRIES`	Number of status read retries
`CONFIG_ENS210_TEMPERATURE_CONTINUOUS`	Enable temperature measurements in continuous mode
`CONFIG_ENS210_TEMPERATURE_OFF`	Disable temperature measurements
`CONFIG_ENS210_TEMPERATURE_SINGLE`	Enable temperature measurements in single shot mode
`CONFIG_ENTROPY_CC13XX_CC26XX_ALARM_THRESHOLD`	Threshold for detected repeated patterns
`CONFIG_ENTROPY_CC13XX_CC26XX_POOL_SIZE`	Number of bytes in the entropy pool
`CONFIG_ENTROPY_CC13XX_CC26XX_RNG`	TI SimpleLink CC13xx / CC26xx True Random Number Generator (TRNG)
`CONFIG_ENTROPY_CC13XX_CC26XX_SAMPLES_PER_CYCLE`	Number of samples to generate entropy
`CONFIG_ENTROPY_CC13XX_CC26XX_SHUTDOWN_THRESHOLD`	Threshold for the number of FROs automatically shut down
`CONFIG_ENTROPY_CC3XX`	Arm CC3XX RNG driver for Nordic devices
`CONFIG_ENTROPY_DEVICE_RANDOM_GENERATOR`	Use entropy driver to generate random numbers
`CONFIG_ENTROPY_ESP32_RNG`	ESP32 entropy number generator driver
`CONFIG_ENTROPY_GECKO_TRNG`	GECKO TRNG driver
`CONFIG_ENTROPY_GENERATOR`	Entropy Drivers
`CONFIG_ENTROPY_HAS_DRIVER`
`CONFIG_ENTROPY_LITEX_RNG`	PRBS RNG driver
`CONFIG_ENTROPY_MCUX_RNG`	MCUX RNG driver
`CONFIG_ENTROPY_MCUX_RNGA`	MCUX RNGA driver
`CONFIG_ENTROPY_MCUX_TRNG`	MCUX TRNG driver
`CONFIG_ENTROPY_NRF5_BIAS_CORRECTION`	Enable bias correction (uniform distribution)
`CONFIG_ENTROPY_NRF5_ISR_POOL_SIZE`	ISR-mode random number pool size
`CONFIG_ENTROPY_NRF5_ISR_THRESHOLD`	ISR-mode random number pool low-water threshold
`CONFIG_ENTROPY_NRF5_RNG`	nRF5 RNG driver