Zigbee ZBOSS OSIF¶
The Zigbee ZBOSS OSIF layer subsystem acts as the linking layer between the ZBOSS Zigbee stack and the nRF Connect SDK.
The ZBOSS OSIF layer implements a series of functions used by ZBOSS and is included in the nRF Connect SDK’s Zigbee subsystem.
The ZBOSS OSIF layer is automatically enabled when you enable the ZBOSS library with the
CONFIG_ZIGBEE Kconfig option.
You can also configure the following OSIF-related Kconfig options:
CONFIG_ZIGBEE_APP_CB_QUEUE_LENGTH- Defines the length of the application callback and alarm queue. This queue is used to pass application callbacks and alarms from other threads or interrupts to the ZBOSS main loop context.
CONFIG_ZIGBEE_DEBUG_FUNCTIONS- Includes functions to suspend and resume the ZBOSS thread.
These functions are useful for debugging, but they can cause instability of the device.
CONFIG_ZIGBEE_USE_BUTTONS- Enables the buttons abstract for the ZBOSS OSIF layer. You can use this option if you want to test ZBOSS examples directly in the nRF Connect SDK.
CONFIG_ZIGBEE_USE_DIMMABLE_LED- Dimmable LED (PWM) abstract for the ZBOSS OSIF layer. You can use this option if you want to test ZBOSS examples directly in the nRF Connect SDK.
CONFIG_ZIGBEE_USE_LEDS- LEDs abstract for the ZBOSS OSIF layer. You can use this option if you want to test ZBOSS examples directly in the nRF Connect SDK.
CONFIG_ZIGBEE_USE_SOFTWARE_AES- Configures the ZBOSS OSIF layer to use the software encryption.
Additionally, the following Kconfig option is available when setting Zephyr’s logger options:
CONFIG_ZBOSS_OSIF_LOG_LEVEL- Configures the custom logger options for the ZBOSS OSIF layer.
CONFIG_ZIGBEE_HAVE_SERIAL option enables the serial abstract for the ZBOSS OSIF layer.
The ZBOSS OSIF serial implements sets of backend functions that are used by the ZBOSS stack for serial communication:
Zigbee async serial
Zigbee serial logger
These backend functions serve one or both of the following purposes:
Logging ZBOSS traces - Used for handling stack logs that are useful for debugging and are provided in binary format.
Handling NCP communication with the host device - Used only for the NCP architecture.
The following table shows which sets of functions serve which purpose.
Logging ZBOSS traces
Handling NCP communication
For more information about configuring ZBOSS stack logs, see Stack logs.
The Zigbee async serial is the only backend that the ZBOSS OSIF serial supports for handling the NCP communication. This set of functions uses Zephyr UART API and can be configured to use UART peripheral or USB CDC ACM device. The data received is internally buffered.
You can also use the Zigbee async serial for logging ZBOSS traces. When enabled, it logs ZBOSS traces in the binary format. In such case, the transmission data is also buffered.
Zigbee async serial configuration options¶
To configure this set of functions, use the following options:
CONFIG_ZIGBEE_HAVE_ASYNC_SERIAL- This option enables Zigbee async serial.
CONFIG_ZIGBEE_UART_DEVICE_NAME- This option specifies serial device to use.
CONFIG_ZIGBEE_UART_SUPPORTS_FLOW_CONTROL- This option should be set if serial device supports flow control.
CONFIG_ZIGBEE_UART_RX_BUF_LEN- This option enables and configures the size of internal RX and TX buffer.
CONFIG_ZBOSS_TRACE_BINARY_NCP_TRANSPORT_LOGGING- This option enables logging ZBOSS traces in binary format with Zigbee async serial.
This set of functions uses Zephyr’s UART API and can be configured to use either the UART peripheral or the USB CDC ACM device. Data is buffered internally in ring buffer and printed in the binary format.
Zigbee serial logger configuration options¶
Use the following options to configure the Zigbee serial logger:
CONFIG_ZBOSS_TRACE_BINARY_LOGGING- This option enables logging ZBOSS traces with Zigbee serial logger.
CONFIG_ZBOSS_TRACE_UART_LOGGING- This option selects the UART serial backend.
CONFIG_ZBOSS_TRACE_USB_CDC_LOGGING- This option selects the USB CDC ACM serial backend.
CONFIG_ZBOSS_TRACE_LOGGER_DEVICE_NAME- This option specifies the serial device to use.
CONFIG_ZBOSS_TRACE_LOGGER_BUFFER_SIZE- This option specifies the size of the internal ring buffer.
This set of functions uses Zephyr’s Logging API for logging hexdumps of received binary data. Data is buffered internally in ring buffer.
Function for checking if the Zigbee stack has been started.
true – Zigbee stack has been started.
false – Zigbee stack has not been started yet.
Function for starting the Zigbee thread.
Function for suspending the ZBOSS thread.
Function for resuming the ZBOSS thread.
Function for getting the state of the Zigbee stack thread processing suspension.
true – Scheduler processing is suspended or the ZBOSS thread is not yet created.
false – Scheduler processing is not suspended and the ZBOSS thread is created.