st,stm32-spi¶

Description¶

These nodes are “spi” bus nodes.

STM32 SPI controller

Properties¶

Properties not inherited from the base binding file.

Name

Type

Details

pinctrl-0

phandles

Pin configuration for SPI signals (MISO, MOSI, SCK and optional NSS).
We expect that the phandles will reference pinctrl nodes.

For example the SPI3 would be
   <&spi3_sck_pc10 &spi3_miso_pc11 &spi3_mosi_pc12>;

Example with NSS Pin
   <&spi3_sck_pc10 &spi3_miso_pc11 &spi3_mosi_pc12 &spi3_nss_pa15>;

clock-frequency

int

Clock frequency the SPI peripheral is being driven at

cs-gpios

phandle-array

Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “st,stm32-spi” compatible.

Name	Type	Details
`reg`	`array`	register space This property is required. See Important properties for more information.
`interrupts`	`array`	interrupts for device This property is required. See Important properties for more information.
`#address-cells`	`int`	number of address cells in reg property This property is required. Constant value: `1`
`#size-cells`	`int`	number of size cells in reg property This property is required.
`label`	`string`	Human readable string describing the device (used as device_get_binding() argument) This property is required. See Important properties for more information.
`status`	`string`	indicates the operational status of a device Legal values: `'ok'`, `'okay'`, `'disabled'`, `'reserved'`, `'fail'`, `'fail-sss'` See Important properties for more information.
`compatible`	`string-array`	compatible strings This property is required. See Important properties for more information.
`reg-names`	`string-array`	name of each register space
`interrupts-extended`	`compound`	extended interrupt specifier for device
`interrupt-names`	`string-array`	name of each interrupt
`interrupt-parent`	`phandle`	phandle to interrupt controller node
`clocks`	`phandle-array`	Clock gate information
`clock-names`	`string-array`	name of each clock
`dmas`	`phandle-array`	DMA channels specifiers
`dma-names`	`string-array`	Provided names of DMA channel specifiers
`io-channels`	`phandle-array`	IO channels specifiers
`io-channel-names`	`string-array`	Provided names of IO channel specifiers