nordic,nrf-twim¶
Vendor: Nordic Semiconductor
Properties¶
Properties not inherited from the base binding file.
Name |
Type |
Details |
---|---|---|
|
|
If concatenation buffer size is set, then multiple messages in the same direction will be concatenated into single transfers as long as there is space in buffer and no restart or stop flag is set.
This property must be provided when interacting with devices like the SSD1306 display that cannot tolerate a repeated start and address appearing on the bus between message fragments. For many devices a concatenation buffer is not necessary.
|
|
|
SDA pin
This property is required. |
|
|
SCL pin
This property is required. |
|
|
Initial clock frequency in Hz
|
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “nordic,nrf-twim” compatible.
Name |
Type |
Details |
---|---|---|
|
|
register space
This property is required. See Important properties for more information. |
|
|
interrupts for device
This property is required. See Important properties for more information. |
|
|
number of address cells in reg property
This property is required. Constant value: |
|
|
number of size cells in reg property
This property is required. |
|
|
Human readable string describing the device (used as device_get_binding() argument)
This property is required. See Important properties for more information. |
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
name of each register space
|
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
Clock gate information
|
|
|
name of each clock
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|