atmel,sam-ssc¶
Vendor: Atmel Corporation
Description¶
Atmel SAM SSC (Synchronous Serial Controller) controller
Properties¶
Properties not inherited from the base binding file.
Name |
Type |
Details |
---|---|---|
|
|
peripheral ID
This property is required. |
|
|
PIO pin configuration for RF, RK, RD, TF, TK, & TD signals.
We expect that the phandles will reference pinctrl nodes.
These nodes will have a nodelabel that matches the Atmel SoC HAL
defines and be of the form p<port><pin><periph>_<inst>_<signal>.
For example the SSC on SAME7x would be
pinctrl-0 = <&pd24b_ssc_rf &pa22a_ssc_rk &pa10c_ssc_rd
&pb0d_ssc_tf &pb1d_ssc_tk &pb5d_ssc_td>;
This property is required. |
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “atmel,sam-ssc” compatible.
Name |
Type |
Details |
---|---|---|
|
|
register space
This property is required. See Important properties for more information. |
|
|
interrupts for device
This property is required. See Important properties for more information. |
|
|
TX & RX dma specifiers. Each specifier will have a phandle
reference to the dma controller, the channel number, and peripheral
trigger source.
For example dmas for TX, RX would look like
dmas = <&xdmac 22 DMA_PERID_SSC_TX>, <&xdmac 23 DMA_PERID_SSC_RX>;
This property is required. |
|
|
This should be "tx" and "rx" to match the dmas property.
For example
dma-names = "tx", "rx";
This property is required. |
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
name of each register space
|
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
Human readable string describing the device (used as device_get_binding() argument)
See Important properties for more information. |
|
|
Clock gate information
|
|
|
name of each clock
|
|
|
number of address cells in reg property
|
|
|
number of size cells in reg property
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|