atmel,sam-spi¶
Vendor: Atmel Corporation
Properties¶
Properties not inherited from the base binding file.
Name |
Type |
Details |
---|---|---|
|
|
peripheral ID
This property is required. |
|
|
PIO pin configuration for the various SPI signals that includes
MISO, MOSI, SPCK, and possibly various chip selects signals. We
expect that the phandles will reference pinctrl nodes. These
nodes will have a nodelabel that matches the Atmel SoC HAL defines
and be of the form p<port><pin><periph>_<inst>_<signal>.
For example the SPI on SAME7x would be
pinctrl-0 = <&pd20b_spi0_miso &pd21b_spi0_mosi &pd22b_spi0_spck>;
This property is required. |
|
|
Clock frequency the SPI peripheral is being driven at
|
|
|
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “atmel,sam-spi” compatible.
Name |
Type |
Details |
---|---|---|
|
|
register space
This property is required. See Important properties for more information. |
|
|
interrupts for device
This property is required. See Important properties for more information. |
|
|
number of address cells in reg property
This property is required. Constant value: |
|
|
number of size cells in reg property
This property is required. |
|
|
Human readable string describing the device (used as device_get_binding() argument)
This property is required. See Important properties for more information. |
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
name of each register space
|
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
Clock gate information
|
|
|
name of each clock
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|