atmel,sam-gmac

Vendor: Atmel Corporation

Description

Atmel SAM-family GMAC Ethernet

Properties

Properties not inherited from the base binding file.

Name

Type

Details

num-queues

int

Number of hardware TX and RX queues

This property is required.

max-frame-size

int

Maximum transfer unit (IEEE defined MTU), rather than the maximum frame size (there\'s contradiction in the Devicetree Specification). The current supported values are 1518, 1536 and 10240 (jumbo frames).

Default value: 1518

max-speed

int

Specifies maximum speed in Mbit/s supported by the device.

Default value: 100

phy-connection-type

string

Operation mode of the PHY interface

Default value: rmii

Legal values: 'rmii', 'mii'

pinctrl-0

phandles

PIO pin configuration for the various GMAC signals that include
GTXCK, GTXEN, GTX[3..0], GTXER, GRXCK, GRXDV, GRX[3..0], GRXER,
GCRS, GCOL, GMDC, and GMDIO.  Which signals are used vary based
on if the PHY connection is MII or RMII (see datasheet for more
details).  We expect that the phandles will reference pinctrl nodes.
These nodes will have a nodelabel that matches the Atmel SoC HAL
defines and be of the form p<port><pin><periph>_<inst>_<signal>.

For example the GMAC on SAME7x would be for RMII
   pinctrl-0 = <&pd0a_gmac_gtxck &pd1a_gmac_gtxen
                &pd2a_gmac_gtx0 &pd3a_gmac_gtx1
                &pd4a_gmac_grxdv &pd5a_gmac_grx0
                &pd6a_gmac_grx1 &pd7a_gmac_grxer
                &pd8a_gmac_gmdc &pd9a_gmac_gmdio>;

local-mac-address

uint8-array

Specifies the MAC address that was assigned to the network device

zephyr,random-mac-address

boolean

Use a random MAC address generated when the driver is initialized.
Note that using this choice and rebooting a board may leave stale
MAC address in peers' ARP caches and lead to issues and delays in
communication.  (Use "ip neigh flush all" on Linux peers to clear
ARP cache.)

It is driver specific how the OUI octets are handled.

If set we ignore any setting of the local-mac-address property.

Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “atmel,sam-gmac” compatible.

Name

Type

Details

reg

array

register space

This property is required.

See Important properties for more information.

label

string

Human readable string describing the device (used as device_get_binding() argument)

This property is required.

See Important properties for more information.

status

string

indicates the operational status of a device

Legal values: 'ok', 'okay', 'disabled', 'reserved', 'fail', 'fail-sss'

See Important properties for more information.

compatible

string-array

compatible strings

This property is required.

See Important properties for more information.

reg-names

string-array

name of each register space

interrupts

array

interrupts for device

See Important properties for more information.

interrupts-extended

compound

extended interrupt specifier for device

interrupt-names

string-array

name of each interrupt

interrupt-parent

phandle

phandle to interrupt controller node

clocks

phandle-array

Clock gate information

clock-names

string-array

name of each clock

#address-cells

int

number of address cells in reg property

#size-cells

int

number of size cells in reg property

dmas

phandle-array

DMA channels specifiers

dma-names

string-array

Provided names of DMA channel specifiers

io-channels

phandle-array

IO channels specifiers

io-channel-names

string-array

Provided names of IO channel specifiers