Generic Access Profile (GAP)¶

API Reference¶

group bt_gap

Generic Access Profile.

Defines

BT_ID_DEFAULT¶: Convenience macro for specifying the default identity. This helps make the code more readable, especially when only one identity is supported.

BT_DATA(_type, _data, _data_len)¶

Helper to declare elements of bt_data arrays.

This macro is mainly for creating an array of struct bt_data elements which is then passed to e.g. bt_le_adv_start().

Parameters

_type: Type of advertising data field
_data: Pointer to the data field payload
_data_len: Number of bytes behind the _data pointer

BT_DATA_BYTES(_type, _bytes…)¶

Helper to declare elements of bt_data arrays.

This macro is mainly for creating an array of struct bt_data elements which is then passed to e.g. bt_le_adv_start().

Parameters

_type: Type of advertising data field
_bytes: Variable number of single-byte parameters

BT_LE_ADV_PARAM_INIT(_options, _int_min, _int_max, _peer)¶

Initialize advertising parameters.

Parameters

_options: Advertising Options
_int_min: Minimum advertising interval
_int_max: Maximum advertising interval
_peer: Peer address, set to NULL for undirected advertising or address of peer for directed advertising.

BT_LE_ADV_PARAM(_options, _int_min, _int_max, _peer)¶

Helper to declare advertising parameters inline.

Parameters

_options: Advertising Options
_int_min: Minimum advertising interval
_int_max: Maximum advertising interval
_peer: Peer address, set to NULL for undirected advertising or address of peer for directed advertising.

BT_LE_ADV_CONN_DIR(_peer)¶

BT_LE_ADV_CONN¶

BT_LE_ADV_CONN_NAME¶

BT_LE_ADV_CONN_DIR_LOW_DUTY(_peer)¶

BT_LE_ADV_NCONN¶: Non-connectable advertising with private address

BT_LE_ADV_NCONN_NAME¶: Non-connectable advertising with BT_LE_ADV_OPT_USE_NAME

BT_LE_ADV_NCONN_IDENTITY¶: Non-connectable advertising with BT_LE_ADV_OPT_USE_IDENTITY

BT_LE_PER_ADV_PARAM_INIT(_int_min, _int_max, _options)¶

Helper to declare periodic advertising parameters inline

Parameters

_int_min: Minimum periodic advertising interval
_int_max: Maximum periodic advertising interval
_options: Periodic advertising properties bitfield.

BT_LE_PER_ADV_PARAM(_int_min, _int_max, _options)¶

Helper to declare periodic advertising parameters inline

Parameters

_int_min: Minimum periodic advertising interval
_int_max: Maximum periodic advertising interval
_options: Periodic advertising properties bitfield.

BT_LE_PER_ADV_DEFAULT¶

BT_LE_SCAN_PARAM_INIT(_type, _options, _interval, _window)¶

Initialize scan parameters.

Parameters

_type: Scan Type, BT_LE_SCAN_TYPE_ACTIVE or BT_LE_SCAN_TYPE_PASSIVE.
_options: Scan options
_interval: Scan Interval (N * 0.625 ms)
_window: Scan Window (N * 0.625 ms)

BT_LE_SCAN_PARAM(_type, _options, _interval, _window)¶

Helper to declare scan parameters inline.

Parameters

_type: Scan Type, BT_LE_SCAN_TYPE_ACTIVE or BT_LE_SCAN_TYPE_PASSIVE.
_options: Scan options
_interval: Scan Interval (N * 0.625 ms)
_window: Scan Window (N * 0.625 ms)

BT_LE_SCAN_ACTIVE¶: Helper macro to enable active scanning to discover new devices.

BT_LE_SCAN_PASSIVE¶

Helper macro to enable passive scanning to discover new devices.

This macro should be used if information required for device identification (e.g., UUID) are known to be placed in Advertising Data.

BT_ADDR_STR_LEN¶

Recommended length of user string buffer for Bluetooth address.

The recommended length guarantee the output of address conversion will not lose valuable information about address being processed.

BT_ADDR_LE_STR_LEN¶

Recommended length of user string buffer for Bluetooth LE address.

The recommended length guarantee the output of address conversion will not lose valuable information about address being processed.

Typedefs

typedef void (*bt_ready_cb_t)(int err)¶

Callback for notifying that Bluetooth has been enabled.

Parameters

err: zero on success or (negative) error code otherwise.

typedef void bt_le_scan_cb_t(const bt_addr_le_t *addr, int8_t rssi, uint8_t adv_type, struct net_buf_simple *buf)¶

Callback type for reporting LE scan results.

A function of this type is given to the bt_le_scan_start() function and will be called for any discovered LE device.

Parameters

addr: Advertiser LE address and type.
rssi: Strength of advertiser signal.
adv_type: Type of advertising response from advertiser.
buf: Buffer containing advertiser data.

typedef void bt_br_discovery_cb_t(struct bt_br_discovery_result *results, size_t count)¶

Callback type for reporting BR/EDR discovery (inquiry) results.

A callback of this type is given to the bt_br_discovery_start() function and will be called at the end of the discovery with information about found devices populated in the results array.

Parameters

results: Storage used for discovery results
count: Number of valid discovery results.

Enums

enum [anonymous]¶

Advertising options

Values:

enumerator BT_LE_ADV_OPT_NONE¶: Convenience value when no options are specified.

enumerator BT_LE_ADV_OPT_CONNECTABLE¶

Advertise as connectable.

Advertise as connectable. If not connectable then the type of advertising is determined by providing scan response data. The advertiser address is determined by the type of advertising and/or enabling privacy CONFIG_BT_PRIVACY .

enumerator BT_LE_ADV_OPT_ONE_TIME¶

Advertise one time.

Don’t try to resume connectable advertising after a connection. This option is only meaningful when used together with BT_LE_ADV_OPT_CONNECTABLE. If set the advertising will be stopped when bt_le_adv_stop() is called or when an incoming (slave) connection happens. If this option is not set the stack will take care of keeping advertising enabled even as connections occur. If Advertising directed or the advertiser was started with bt_le_ext_adv_start then this behavior is the default behavior and this flag has no effect.

enumerator BT_LE_ADV_OPT_USE_IDENTITY¶

Advertise using identity address.

Advertise using the identity address as the advertiser address.

Warning: This will compromise the privacy of the device, so care must be taken when using this option.
Note: The address used for advertising will not be the same as returned by bt_le_oob_get_local, instead bt_id_get should be used to get the LE address.

enumerator BT_LE_ADV_OPT_USE_NAME¶: Advertise using GAP device name

enumerator BT_LE_ADV_OPT_DIR_MODE_LOW_DUTY¶

Low duty cycle directed advertising.

Use low duty directed advertising mode, otherwise high duty mode will be used.

enumerator BT_LE_ADV_OPT_DIR_ADDR_RPA¶

Directed advertising to privacy-enabled peer.

Enable use of Resolvable Private Address (RPA) as the target address in directed advertisements. This is required if the remote device is privacy-enabled and supports address resolution of the target address in directed advertisement. It is the responsibility of the application to check that the remote device supports address resolution of directed advertisements by reading its Central Address Resolution characteristic.

enumerator BT_LE_ADV_OPT_FILTER_SCAN_REQ¶: Use whitelist to filter devices that can request scan response data.

enumerator BT_LE_ADV_OPT_FILTER_CONN¶: Use whitelist to filter devices that can connect.

enumerator BT_LE_ADV_OPT_NOTIFY_SCAN_REQ¶: Notify the application when a scan response data has been sent to an active scanner.

enumerator BT_LE_ADV_OPT_SCANNABLE¶

Support scan response data.

When used together with BT_LE_ADV_OPT_EXT_ADV then this option cannot be used together with the BT_LE_ADV_OPT_CONNECTABLE option. When used together with BT_LE_ADV_OPT_EXT_ADV then scan response data must be set.

enumerator BT_LE_ADV_OPT_EXT_ADV¶

Advertise with extended advertising.

This options enables extended advertising in the advertising set. In extended advertising the advertising set will send a small header packet on the three primary advertising channels. This small header points to the advertising data packet that will be sent on one of the 37 secondary advertising channels. The advertiser will send primary advertising on LE 1M PHY, and secondary advertising on LE 2M PHY. Connections will be established on LE 2M PHY.

Without this option the advertiser will send advertising data on the three primary advertising channels.

Note: Enabling this option requires extended advertising support in the peer devices scanning for advertisement packets.

enumerator BT_LE_ADV_OPT_NO_2M¶

Disable use of LE 2M PHY on the secondary advertising channel.

Disabling the use of LE 2M PHY could be necessary if scanners don’t support the LE 2M PHY. The advertiser will send primary advertising on LE 1M PHY, and secondary advertising on LE 1M PHY. Connections will be established on LE 1M PHY.

Note: Cannot be set if BT_LE_ADV_OPT_CODED is set.
Note: Requires BT_LE_ADV_OPT_EXT_ADV.

enumerator BT_LE_ADV_OPT_CODED¶

Advertise on the LE Coded PHY (Long Range).

The advertiser will send both primary and secondary advertising on the LE Coded PHY. This gives the advertiser increased range with the trade-off of lower data rate and higher power consumption. Connections will be established on LE Coded PHY.

Note: Requires BT_LE_ADV_OPT_EXT_ADV

enumerator BT_LE_ADV_OPT_ANONYMOUS¶

Advertise without a device address (identity or RPA).

Note: Requires BT_LE_ADV_OPT_EXT_ADV

enumerator BT_LE_ADV_OPT_USE_TX_POWER¶

Advertise with transmit power.

Note: Requires BT_LE_ADV_OPT_EXT_ADV

enumerator BT_LE_ADV_OPT_DISABLE_CHAN_37¶: Disable advertising on channel index 37.

enumerator BT_LE_ADV_OPT_DISABLE_CHAN_38¶: Disable advertising on channel index 38.

enumerator BT_LE_ADV_OPT_DISABLE_CHAN_39¶: Disable advertising on channel index 39.

enum [anonymous]¶

Periodic Advertising options

Values:

enumerator BT_LE_PER_ADV_OPT_NONE¶: Convenience value when no options are specified.

enumerator BT_LE_PER_ADV_OPT_USE_TX_POWER¶

Advertise with transmit power.

Note: Requires BT_LE_ADV_OPT_EXT_ADV

enum [anonymous]¶

Periodic advertising sync options

Values:

enumerator BT_LE_PER_ADV_SYNC_OPT_NONE¶: Convenience value when no options are specified.

enumerator BT_LE_PER_ADV_SYNC_OPT_USE_PER_ADV_LIST¶

Use the periodic advertising list to sync with advertiser.

When this option is set, the address and SID of the parameters are ignored.

enumerator BT_LE_PER_ADV_SYNC_OPT_REPORTING_INITIALLY_DISABLED¶

Disables periodic advertising reports.

No advertisement reports will be handled until enabled.

enumerator BT_LE_PER_ADV_SYNC_OPT_DONT_SYNC_AOA¶: Sync with Angle of Arrival (AoA) constant tone extension

enumerator BT_LE_PER_ADV_SYNC_OPT_DONT_SYNC_AOD_1US¶: Sync with Angle of Departure (AoD) 1 us constant tone extension

enumerator BT_LE_PER_ADV_SYNC_OPT_DONT_SYNC_AOD_2US¶: Sync with Angle of Departure (AoD) 2 us constant tone extension

enumerator BT_LE_PER_ADV_SYNC_OPT_SYNC_ONLY_CONST_TONE_EXT¶: Do not sync to packets without a constant tone extension

enum [anonymous]¶

Periodic Advertising Sync Transfer options

Values:

enumerator BT_LE_PER_ADV_SYNC_TRANSFER_OPT_NONE¶: Convenience value when no options are specified.

enumerator BT_LE_PER_ADV_SYNC_TRANSFER_OPT_SYNC_NO_AOA¶

No Angle of Arrival (AoA)

Do not sync with Angle of Arrival (AoA) constant tone extension

enumerator BT_LE_PER_ADV_SYNC_TRANSFER_OPT_SYNC_NO_AOD_1US¶

No Angle of Departure (AoD) 1 us.

Do not sync with Angle of Departure (AoD) 1 us constant tone extension

enumerator BT_LE_PER_ADV_SYNC_TRANSFER_OPT_SYNC_NO_AOD_2US¶

No Angle of Departure (AoD) 2.

Do not sync with Angle of Departure (AoD) 2 us constant tone extension

enumerator BT_LE_PER_ADV_SYNC_TRANSFER_OPT_SYNC_ONLY_CTE¶: Only sync to packets with constant tone extension

enum [anonymous]¶

Values:

enumerator BT_LE_SCAN_OPT_NONE¶: Convenience value when no options are specified.

enumerator BT_LE_SCAN_OPT_FILTER_DUPLICATE¶: Filter duplicates.

enumerator BT_LE_SCAN_OPT_FILTER_WHITELIST¶: Filter using whitelist.

enumerator BT_LE_SCAN_OPT_CODED¶: Enable scan on coded PHY (Long Range).

enumerator BT_LE_SCAN_OPT_NO_1M¶

Disable scan on 1M phy.

Note: Requires BT_LE_SCAN_OPT_CODED.

enumerator BT_LE_SCAN_FILTER_DUPLICATE¶

enumerator BT_LE_SCAN_FILTER_WHITELIST¶

enum [anonymous]¶

Values:

enumerator BT_LE_SCAN_TYPE_PASSIVE¶: Scan without requesting additional information from advertisers.

enumerator BT_LE_SCAN_TYPE_ACTIVE¶: Scan and request additional information from advertisers.

Functions

int bt_enable(bt_ready_cb_t cb)¶

Enable Bluetooth.

Enable Bluetooth. Must be the called before any calls that require communication with the local Bluetooth hardware.

Return

Zero on success or (negative) error code otherwise.

Parameters

cb: Callback to notify completion or NULL to perform the enabling synchronously.

int bt_set_name(const char *name)¶

Set Bluetooth Device Name.

Set Bluetooth GAP Device Name.

Return

Zero on success or (negative) error code otherwise.

Parameters

name: New name

const char *bt_get_name(void)¶

Get Bluetooth Device Name.

Get Bluetooth GAP Device Name.

Return: Bluetooth Device Name

int bt_set_id_addr(const bt_addr_le_t *addr)¶

Set the local Identity Address.

Allows setting the local Identity Address from the application. This API must be called before calling bt_enable(). Calling it at any other time will cause it to fail. In most cases the application doesn’t need to use this API, however there are a few valid cases where it can be useful (such as for testing).

At the moment, the given address must be a static random address. In the future support for public addresses may be added.

Return: Zero on success or (negative) error code otherwise.

void bt_id_get(bt_addr_le_t *addrs, size_t *count)¶

Get the currently configured identities.

Returns an array of the currently configured identity addresses. To make sure all available identities can be retrieved, the number of elements in the addrs array should be CONFIG_BT_ID_MAX. The identity identifier that some APIs expect (such as advertising parameters) is simply the index of the identity in the addrs array.

Note

Deleted identities may show up as BT_LE_ADDR_ANY in the returned array.

Parameters

addrs: Array where to store the configured identities.
count: Should be initialized to the array size. Once the function returns it will contain the number of returned identities.

int bt_id_create(bt_addr_le_t *addr, uint8_t *irk)¶

Create a new identity.

Create a new identity using the given address and IRK. This function can be called before calling bt_enable(), in which case it can be used to override the controller’s public address (in case it has one). However, the new identity will only be stored persistently in flash when this API is used after bt_enable(). The reason is that the persistent settings are loaded after bt_enable() and would therefore cause potential conflicts with the stack blindly overwriting what’s stored in flash. The identity will also not be written to flash in case a pre-defined address is provided, since in such a situation the app clearly has some place it got the address from and will be able to repeat the procedure on every power cycle, i.e. it would be redundant to also store the information in flash.

If the application wants to have the stack randomly generate identities and store them in flash for later recovery, the way to do it would be to first initialize the stack (using bt_enable), then call settings_load(), and after that check with bt_id_get() how many identities were recovered. If an insufficient amount of identities were recovered the app may then call bt_id_create() to create new ones.

Return

Identity identifier (>= 0) in case of success, or a negative error code on failure.

Parameters

addr: Address to use for the new identity. If NULL or initialized to BT_ADDR_LE_ANY the stack will generate a new static random address for the identity and copy it to the given parameter upon return from this function (in case the parameter was non-NULL).
irk: Identity Resolving Key (16 bytes) to be used with this identity. If set to all zeroes or NULL, the stack will generate a random IRK for the identity and copy it back to the parameter upon return from this function (in case the parameter was non-NULL). If privacy CONFIG_BT_PRIVACY is not enabled this parameter must be NULL.

int bt_id_reset(uint8_t id, bt_addr_le_t *addr, uint8_t *irk)¶

Reset/reclaim an identity for reuse.

The semantics of the addr and irk parameters of this function are the same as with bt_id_create(). The difference is the first id parameter that needs to be an existing identity (if it doesn’t exist this function will return an error). When given an existing identity this function will disconnect any connections created using it, remove any pairing keys or other data associated with it, and then create a new identity in the same slot, based on the addr and irk parameters.

Note

the default identity (BT_ID_DEFAULT) cannot be reset, i.e. this API will return an error if asked to do that.

Return

Identity identifier (>= 0) in case of success, or a negative error code on failure.

Parameters

id: Existing identity identifier.
addr: Address to use for the new identity. If NULL or initialized to BT_ADDR_LE_ANY the stack will generate a new static random address for the identity and copy it to the given parameter upon return from this function (in case the parameter was non-NULL).
irk: Identity Resolving Key (16 bytes) to be used with this identity. If set to all zeroes or NULL, the stack will generate a random IRK for the identity and copy it back to the parameter upon return from this function (in case the parameter was non-NULL). If privacy CONFIG_BT_PRIVACY is not enabled this parameter must be NULL.

int bt_id_delete(uint8_t id)¶

Delete an identity.

When given a valid identity this function will disconnect any connections created using it, remove any pairing keys or other data associated with it, and then flag is as deleted, so that it can not be used for any operations. To take back into use the slot the identity was occupying the bt_id_reset() API needs to be used.

Note

the default identity (BT_ID_DEFAULT) cannot be deleted, i.e. this API will return an error if asked to do that.

Return

0 in case of success, or a negative error code on failure.

Parameters

id: Existing identity identifier.

int bt_le_adv_start(const struct bt_le_adv_param *param, const struct bt_data *ad, size_t ad_len, const struct bt_data *sd, size_t sd_len)¶

Start advertising.

Set advertisement data, scan response data, advertisement parameters and start advertising.

When the advertisement parameter peer address has been set the advertising will be directed to the peer. In this case advertisement data and scan response data parameters are ignored. If the mode is high duty cycle the timeout will be BT_GAP_ADV_HIGH_DUTY_CYCLE_MAX_TIMEOUT.

Return

Zero on success or (negative) error code otherwise.

Return

-ENOMEM No free connection objects available for connectable advertiser.

Return

-ECONNREFUSED When connectable advertising is requested and there is already maximum number of connections established in the controller. This error code is only guaranteed when using Zephyr controller, for other controllers code returned in this case may be -EIO.

Parameters

param: Advertising parameters.
ad: Data to be used in advertisement packets.
ad_len: Number of elements in ad
sd: Data to be used in scan response packets.
sd_len: Number of elements in sd

int bt_le_adv_update_data(const struct bt_data *ad, size_t ad_len, const struct bt_data *sd, size_t sd_len)¶

Update advertising.

Update advertisement and scan response data.

Return

Zero on success or (negative) error code otherwise.

Parameters

ad: Data to be used in advertisement packets.
ad_len: Number of elements in ad
sd: Data to be used in scan response packets.
sd_len: Number of elements in sd

int bt_le_adv_stop(void)¶

Stop advertising.

Stops ongoing advertising.

Return: Zero on success or (negative) error code otherwise.

int bt_le_ext_adv_create(const struct bt_le_adv_param *param, const struct bt_le_ext_adv_cb *cb, struct bt_le_ext_adv **adv)¶

Create advertising set.

Create a new advertising set and set advertising parameters. Advertising parameters can be updated with bt_le_ext_adv_update_param.

Return

Zero on success or (negative) error code otherwise.

Parameters

[in] param: Advertising parameters.
[in] cb: Callback struct to notify about advertiser activity. Can be NULL. Must point to valid memory during the lifetime of the advertising set.
[out] adv: Valid advertising set object on success.

int bt_le_ext_adv_start(struct bt_le_ext_adv *adv, struct bt_le_ext_adv_start_param *param)¶

Start advertising with the given advertising set.

If the advertiser is limited by either the timeout or number of advertising events the application will be notified by the advertiser sent callback once the limit is reached. If the advertiser is limited by both the timeout and the number of advertising events then the limit that is reached first will stop the advertiser.

Parameters

adv: Advertising set object.
param: Advertise start parameters.

int bt_le_ext_adv_stop(struct bt_le_ext_adv *adv)¶

Stop advertising with the given advertising set.

Stop advertising with a specific advertising set. When using this function the advertising sent callback will not be called.

Return

Zero on success or (negative) error code otherwise.

Parameters

adv: Advertising set object.

int bt_le_ext_adv_set_data(struct bt_le_ext_adv *adv, const struct bt_data *ad, size_t ad_len, const struct bt_data *sd, size_t sd_len)¶

Set an advertising set’s advertising or scan response data.

Set advertisement data or scan response data. If the advertising set is currently advertising then the advertising data will be updated in subsequent advertising events.

When both BT_LE_ADV_OPT_EXT_ADV and BT_LE_ADV_OPT_SCANNABLE are enabled then advertising data is ignored. When BT_LE_ADV_OPT_SCANNABLE is not enabled then scan response data is ignored.

If the advertising set has been configured to send advertising data on the primary advertising channels then the maximum data length is BT_GAP_ADV_MAX_ADV_DATA_LEN bytes. If the advertising set has been configured for extended advertising, then the maximum data length is defined by the controller with the maximum possible of BT_GAP_ADV_MAX_EXT_ADV_DATA_LEN bytes.

Note

Not all scanners support extended data length advertising data.

Note

When updating the advertising data while advertising the advertising data and scan response data length must be smaller or equal to what can be fit in a single advertising packet. Otherwise the advertiser must be stopped.

Return

Zero on success or (negative) error code otherwise.

Parameters

adv: Advertising set object.
ad: Data to be used in advertisement packets.
ad_len: Number of elements in ad
sd: Data to be used in scan response packets.
sd_len: Number of elements in sd

int bt_le_ext_adv_update_param(struct bt_le_ext_adv *adv, const struct bt_le_adv_param *param)¶

Update advertising parameters.

Update the advertising parameters. The function will return an error if the advertiser set is currently advertising. Stop the advertising set before calling this function.

Return

Zero on success or (negative) error code otherwise.

Parameters

adv: Advertising set object.
param: Advertising parameters.

int bt_le_ext_adv_delete(struct bt_le_ext_adv *adv)¶

Delete advertising set.

Delete advertising set. This will free up the advertising set and make it possible to create a new advertising set.

Return: Zero on success or (negative) error code otherwise.

uint8_t bt_le_ext_adv_get_index(struct bt_le_ext_adv *adv)¶

Get array index of an advertising set.

This function is used to map bt_adv to index of an array of advertising sets. The array has CONFIG_BT_EXT_ADV_MAX_ADV_SET elements.

Return

Index of the advertising set object. The range of the returned value is 0..CONFIG_BT_EXT_ADV_MAX_ADV_SET-1

Parameters

adv: Advertising set.

int bt_le_ext_adv_get_info(const struct bt_le_ext_adv *adv, struct bt_le_ext_adv_info *info)¶

Get advertising set info.

Return

Zero on success or (negative) error code on failure.

Parameters

adv: Advertising set object
info: Advertising set info object

int bt_le_per_adv_set_param(struct bt_le_ext_adv *adv, const struct bt_le_per_adv_param *param)¶

Set or update the periodic advertising parameters.

The periodic advertising parameters can only be set or updated on an extended advertisement set which is neither scannable, connectable nor anonymous.

Return

Zero on success or (negative) error code otherwise.

Parameters

adv: Advertising set object.
param: Advertising parameters.

int bt_le_per_adv_set_data(const struct bt_le_ext_adv *adv, const struct bt_data *ad, size_t ad_len)¶

Set or update the periodic advertising data.

The periodic advertisement data can only be set or updated on an extended advertisement set which is neither scannable, connectable nor anonymous.

Return

Zero on success or (negative) error code otherwise.

Parameters

adv: Advertising set object.
ad: Advertising data.
ad_len: Advertising data length.

int bt_le_per_adv_start(struct bt_le_ext_adv *adv)¶

Starts periodic advertising.

Enabling the periodic advertising can be done independently of extended advertising, but both periodic advertising and extended advertising shall be enabled before any periodic advertising data is sent. The periodic advertising and extended advertising can be enabled in any order.

Once periodic advertising has been enabled, it will continue advertising until bt_le_per_adv_stop() has been called, or if the advertising set is deleted by bt_le_ext_adv_delete(). Calling bt_le_ext_adv_stop() will not stop the periodic advertising.

Return

Zero on success or (negative) error code otherwise.

Parameters

adv: Advertising set object.

int bt_le_per_adv_stop(struct bt_le_ext_adv *adv)¶

Stops periodic advertising.

Disabling the periodic advertising can be done independently of extended advertising. Disabling periodic advertising will not disable extended advertising.

Return

Zero on success or (negative) error code otherwise.

Parameters

adv: Advertising set object.

uint8_t bt_le_per_adv_sync_get_index(struct bt_le_per_adv_sync *per_adv_sync)¶

Get array index of an periodic advertising sync object.

This function is get the index of an array of periodic advertising sync objects. The array has CONFIG_BT_PER_ADV_SYNC_MAX elements.

Return

Index of the periodic advertising sync object. The range of the returned value is 0..CONFIG_BT_PER_ADV_SYNC_MAX-1

Parameters

per_adv_sync: The periodic advertising sync object.

int bt_le_per_adv_sync_create(const struct bt_le_per_adv_sync_param *param, struct bt_le_per_adv_sync **out_sync)¶

Create a periodic advertising sync object.

Create a periodic advertising sync object that can try to synchronize to periodic advertising reports from an advertiser. Scan shall either be disabled or extended scan shall be enabled.

Return

Zero on success or (negative) error code otherwise.

Parameters

[in] param: Periodic advertising sync parameters.
[out] out_sync: Periodic advertising sync object on.

int bt_le_per_adv_sync_delete(struct bt_le_per_adv_sync *per_adv_sync)¶

Delete periodic advertising sync.

Delete the periodic advertising sync object. Can be called regardless of the state of the sync. If the syncing is currently syncing, the syncing is cancelled. If the sync has been established, it is terminated. The periodic advertising sync object will be invalidated afterwards.

If the state of the sync object is syncing, then a new periodic advertising sync object may not be created until the controller has finished canceling this object.

Return

Zero on success or (negative) error code otherwise.

Parameters

per_adv_sync: The periodic advertising sync object.

void bt_le_per_adv_sync_cb_register(struct bt_le_per_adv_sync_cb *cb)¶

Register periodic advertising sync callbacks.

Adds the callback structure to the list of callback structures for periodic adverising syncs.

This callback will be called for all periodic advertising sync activity, such as synced, terminated and when data is received.

Parameters

cb: Callback struct. Must point to memory that remains valid.

int bt_le_per_adv_sync_recv_enable(struct bt_le_per_adv_sync *per_adv_sync)¶

Enables receiving periodic advertising reports for a sync.

If the sync is already receiving the reports, -EALREADY is returned.

Return

Zero on success or (negative) error code otherwise.

Parameters

per_adv_sync: The periodic advertising sync object.

int bt_le_per_adv_sync_recv_disable(struct bt_le_per_adv_sync *per_adv_sync)¶

Disables receiving periodic advertising reports for a sync.

If the sync report receiving is already disabled, -EALREADY is returned.

Return

Zero on success or (negative) error code otherwise.

Parameters

per_adv_sync: The periodic advertising sync object.

int bt_le_per_adv_sync_transfer(const struct bt_le_per_adv_sync *per_adv_sync, const struct bt_conn *conn, uint16_t service_data)¶

Transfer the periodic advertising sync information to a peer device.

This will allow another device to quickly synchronize to the same periodic advertising train that this device is currently synced to.

Return

Zero on success or (negative) error code otherwise.

Parameters

per_adv_sync: The periodic advertising sync to transfer.
conn: The peer device that will receive the sync information.
service_data: Application service data provided to the remote host.

int bt_le_per_adv_set_info_transfer(const struct bt_le_ext_adv *adv, const struct bt_conn *conn, uint16_t service_data)¶

Transfer the information about a periodic advertising set.

This will allow another device to quickly synchronize to periodic advertising set from this device.

Return

Zero on success or (negative) error code otherwise.

Parameters

adv: The periodic advertising set to transfer info of.
conn: The peer device that will receive the information.
service_data: Application service data provided to the remote host.

int bt_le_per_adv_sync_transfer_subscribe(const struct bt_conn *conn, const struct bt_le_per_adv_sync_transfer_param *param)¶

Subscribe to periodic advertising sync transfers (PASTs).

Sets the parameters and allow other devices to transfer periodic advertising syncs.

Return

Zero on success or (negative) error code otherwise.

Parameters

conn: The connection to set the parameters for. If NULL default parameters for all connections will be set. Parameters set for specific connection will always have precedence.
param: The periodic advertising sync transfer parameters.

int bt_le_per_adv_sync_transfer_unsubscribe(const struct bt_conn *conn)¶

Unsubscribe from periodic advertising sync transfers (PASTs).

Remove the parameters that allow other devices to transfer periodic advertising syncs.

Return

Zero on success or (negative) error code otherwise.

Parameters

conn: The connection to remove the parameters for. If NULL default parameters for all connections will be removed. Unsubscribing for a specific device, will still allow other devices to transfer periodic advertising syncs.

int bt_le_per_adv_list_add(const bt_addr_le_t *addr, uint8_t sid)¶

Add a device to the periodic advertising list.

Add peer device LE address to the periodic advertising list. This will make it possibly to automatically create a periodic advertising sync to this device.

Return

Zero on success or (negative) error code otherwise.

Parameters

addr: Bluetooth LE identity address.
sid: The advertising set ID. This value is obtained from the bt_le_scan_recv_info in the scan callback.

int bt_le_per_adv_list_remove(const bt_addr_le_t *addr, uint8_t sid)¶

Remove a device from the periodic advertising list.

Removes peer device LE address from the periodic advertising list.

Return

Zero on success or (negative) error code otherwise.

Parameters

addr: Bluetooth LE identity address.
sid: The advertising set ID. This value is obtained from the bt_le_scan_recv_info in the scan callback.

int bt_le_per_adv_list_clear(void)¶

Clear the periodic advertising list.

Clears the entire periodic advertising list.

Return: Zero on success or (negative) error code otherwise.

int bt_le_scan_start(const struct bt_le_scan_param *param, bt_le_scan_cb_t cb)¶

Start (LE) scanning.

Start LE scanning with given parameters and provide results through the specified callback.

Note

The LE scanner by default does not use the Identity Address of the local device when CONFIG_BT_PRIVACY is disabled. This is to prevent the active scanner from disclosing the identity information when requesting additional information from advertisers. In order to enable directed advertiser reports then CONFIG_BT_SCAN_WITH_IDENTITY must be enabled.

Return

Zero on success or error code otherwise, positive in case of protocol error or negative (POSIX) in case of stack internal error.

Parameters

param: Scan parameters.
cb: Callback to notify scan results. May be NULL if callback registration through bt_le_scan_cb_register is preferred.

int bt_le_scan_stop(void)¶

Stop (LE) scanning.

Stops ongoing LE scanning.

Return: Zero on success or error code otherwise, positive in case of protocol error or negative (POSIX) in case of stack internal error.

void bt_le_scan_cb_register(struct bt_le_scan_cb *cb)¶

Register scanner packet callbacks.

Adds the callback structure to the list of callback structures that monitors scanner activity.

This callback will be called for all scanner activity, regardless of what API was used to start the scanner.

Parameters

cb: Callback struct. Must point to memory that remains valid.

int bt_le_whitelist_add(const bt_addr_le_t *addr)¶

Add device (LE) to whitelist.

Add peer device LE address to the whitelist.

Note

The whitelist cannot be modified when an LE role is using the whitelist, i.e advertiser or scanner using a whitelist or automatic connecting to devices using whitelist.

Return

Zero on success or error code otherwise, positive in case of protocol error or negative (POSIX) in case of stack internal error.

Parameters

addr: Bluetooth LE identity address.

int bt_le_whitelist_rem(const bt_addr_le_t *addr)¶

Remove device (LE) from whitelist.

Remove peer device LE address from the whitelist.

Note

The whitelist cannot be modified when an LE role is using the whitelist, i.e advertiser or scanner using a whitelist or automatic connecting to devices using whitelist.

Return

Zero on success or error code otherwise, positive in case of protocol error or negative (POSIX) in case of stack internal error.

Parameters

addr: Bluetooth LE identity address.

int bt_le_whitelist_clear(void)¶

Clear whitelist.

Clear all devices from the whitelist.

Note: The whitelist cannot be modified when an LE role is using the whitelist, i.e advertiser or scanner using a whitelist or automatic connecting to devices using whitelist.
Return: Zero on success or error code otherwise, positive in case of protocol error or negative (POSIX) in case of stack internal error.

int bt_le_set_chan_map(uint8_t chan_map[5])¶

Set (LE) channel map.

Return

Zero on success or error code otherwise, positive in case of protocol error or negative (POSIX) in case of stack internal error.

Parameters

chan_map: Channel map.

void bt_data_parse(struct net_buf_simple *ad, bool (*func)(struct bt_data *data, void *user_data), void *user_data, )¶

Helper for parsing advertising (or EIR or OOB) data.

A helper for parsing the basic data types used for Extended Inquiry Response (EIR), Advertising Data (AD), and OOB data blocks. The most common scenario is to call this helper on the advertising data received in the callback that was given to bt_le_scan_start().

Parameters

ad: Advertising data as given to the bt_le_scan_cb_t callback.
func: Callback function which will be called for each element that’s found in the data. The callback should return true to continue parsing, or false to stop parsing.
user_data: User data to be passed to the callback.

int bt_le_oob_get_local(uint8_t id, struct bt_le_oob *oob)¶

Get local LE Out of Band (OOB) information.

This function allows to get local information that are useful for Out of Band pairing or connection creation.

If privacy CONFIG_BT_PRIVACY is enabled this will result in generating new Resolvable Private Address (RPA) that is valid for CONFIG_BT_RPA_TIMEOUT seconds. This address will be used for advertising started by bt_le_adv_start, active scanning and connection creation.

Note

If privacy is enabled the RPA cannot be refreshed in the following cases:

Creating a connection in progress, wait for the connected callback. In addition when extended advertising CONFIG_BT_EXT_ADV is not enabled or not supported by the controller:
Advertiser is enabled using a Random Static Identity Address for a different local identity.
The local identity conflicts with the local identity used by other roles.

Return

Zero on success or error code otherwise, positive in case of protocol error or negative (POSIX) in case of stack internal error.

Parameters

[in] id: Local identity, in most cases BT_ID_DEFAULT.
[out] oob: LE OOB information

int bt_le_ext_adv_oob_get_local(struct bt_le_ext_adv *adv, struct bt_le_oob *oob)¶

Get local LE Out of Band (OOB) information.

This function allows to get local information that are useful for Out of Band pairing or connection creation.

If privacy CONFIG_BT_PRIVACY is enabled this will result in generating new Resolvable Private Address (RPA) that is valid for CONFIG_BT_RPA_TIMEOUT seconds. This address will be used by the advertising set.

Note

When generating OOB information for multiple advertising set all OOB information needs to be generated at the same time.

Note

If privacy is enabled the RPA cannot be refreshed in the following cases:

Creating a connection in progress, wait for the connected callback.

Return

Zero on success or error code otherwise, positive in case of protocol error or negative (POSIX) in case of stack internal error.

Parameters

[in] adv: The advertising set object
[out] oob: LE OOB information

int bt_br_discovery_start(const struct bt_br_discovery_param *param, struct bt_br_discovery_result *results, size_t count, bt_br_discovery_cb_t cb)¶

Start BR/EDR discovery.

Start BR/EDR discovery (inquiry) and provide results through the specified callback. When bt_br_discovery_cb_t is called it indicates that discovery has completed. If more inquiry results were received during session than fits in provided result storage, only ones with highest RSSI will be reported.

Return

Zero on success or error code otherwise, positive in case of protocol error or negative (POSIX) in case of stack internal error

Parameters

param: Discovery parameters.
results: Storage for discovery results.
count: Number of results in storage. Valid range: 1-255.
cb: Callback to notify discovery results.

int bt_br_discovery_stop(void)¶

Stop BR/EDR discovery.

Stops ongoing BR/EDR discovery. If discovery was stopped by this call results won’t be reported

Return: Zero on success or error code otherwise, positive in case of protocol error or negative (POSIX) in case of stack internal error.

int bt_br_oob_get_local(struct bt_br_oob *oob)¶

Get BR/EDR local Out Of Band information.

This function allows to get local controller information that are useful for Out Of Band pairing or connection creation process.

Parameters

oob: Out Of Band information

int bt_addr_to_str(const bt_addr_t *addr, char *str, size_t len)¶

Converts binary Bluetooth address to string.

Return

Number of successfully formatted bytes from binary address.

Parameters

addr: Address of buffer containing binary Bluetooth address.
str: Address of user buffer with enough room to store formatted string containing binary address.
len: Length of data to be copied to user string buffer. Refer to BT_ADDR_STR_LEN about recommended value.

int bt_addr_le_to_str(const bt_addr_le_t *addr, char *str, size_t len)¶

Converts binary LE Bluetooth address to string.

Return

Number of successfully formatted bytes from binary address.

Parameters

addr: Address of buffer containing binary LE Bluetooth address.
str: Address of user buffer with enough room to store formatted string containing binary LE address.
len: Length of data to be copied to user string buffer. Refer to BT_ADDR_LE_STR_LEN about recommended value.

int bt_addr_from_str(const char *str, bt_addr_t *addr)¶

Convert Bluetooth address from string to binary.

Return

Zero on success or (negative) error code otherwise.

Parameters

[in] str: The string representation of a Bluetooth address.
[out] addr: Address of buffer to store the Bluetooth address

int bt_addr_le_from_str(const char *str, const char *type, bt_addr_le_t *addr)¶

Convert LE Bluetooth address from string to binary.

Return

Zero on success or (negative) error code otherwise.

Parameters

[in] str: The string representation of an LE Bluetooth address.
[in] type: The string representation of the LE Bluetooth address type.
[out] addr: Address of buffer to store the LE Bluetooth address

int bt_br_set_discoverable(bool enable)¶

Enable/disable set controller in discoverable state.

Allows make local controller to listen on INQUIRY SCAN channel and responds to devices making general inquiry. To enable this state it’s mandatory to first be in connectable state.

Return

Negative if fail set to requested state or requested state has been already set. Zero if done successfully.

Parameters

enable: Value allowing/disallowing controller to become discoverable.

int bt_br_set_connectable(bool enable)¶

Enable/disable set controller in connectable state.

Allows make local controller to be connectable. It means the controller start listen to devices requests on PAGE SCAN channel. If disabled also resets discoverability if was set.

Return

Negative if fail set to requested state or requested state has been already set. Zero if done successfully.

Parameters

enable: Value allowing/disallowing controller to be connectable.

int bt_unpair(uint8_t id, const bt_addr_le_t *addr)¶

Clear pairing information.

Return

0 on success or negative error value on failure.

Parameters

id: Local identity (mostly just BT_ID_DEFAULT).
addr: Remote address, NULL or BT_ADDR_LE_ANY to clear all remote devices.

void bt_foreach_bond(uint8_t id, void (*func)(const struct bt_bond_info *info, void *user_data), void *user_data, )¶

Iterate through all existing bonds.

Parameters

id: Local identity (mostly just BT_ID_DEFAULT).
func: Function to call for each bond.
user_data: Data to pass to the callback function.

struct bt_le_ext_adv_sent_info¶

#include <bluetooth.h>

Public Members

uint8_t num_sent¶: The number of advertising events completed.

struct bt_le_ext_adv_connected_info¶

#include <bluetooth.h>

Public Members

struct bt_conn *conn¶: Connection object of the new connection

struct bt_le_ext_adv_scanned_info¶

#include <bluetooth.h>

Public Members

bt_addr_le_t *addr¶: Active scanner LE address and type

struct bt_le_ext_adv_cb¶

#include <bluetooth.h>

Public Members

void (*sent)(struct bt_le_ext_adv *adv, struct bt_le_ext_adv_sent_info *info)¶

The advertising set has finished sending adv data.

This callback notifies the application that the advertising set has finished sending advertising data. The advertising set can either have been stopped by a timeout or because the specified number of advertising events has been reached.

Parameters

adv: The advertising set object.
info: Information about the sent event.

void (*connected)(struct bt_le_ext_adv *adv, struct bt_le_ext_adv_connected_info *info)¶

The advertising set has accepted a new connection.

This callback notifies the application that the advertising set has accepted a new connection.

Parameters

adv: The advertising set object.
info: Information about the connected event.

void (*scanned)(struct bt_le_ext_adv *adv, struct bt_le_ext_adv_scanned_info *info)¶

The advertising set has sent scan response data.

This callback notifies the application that the advertising set has has received a Scan Request packet, and has sent a Scan Response packet.

Parameters

adv: The advertising set object.
addr: Information about the scanned event.

struct bt_data¶

#include <bluetooth.h>

Bluetooth data.

Description of different data types that can be encoded into advertising data. Used to form arrays that are passed to the bt_le_adv_start() function.

struct bt_le_adv_param¶

#include <bluetooth.h>

LE Advertising Parameters.

Public Members

uint8_t id¶

Local identity.

Note: When extended advertising CONFIG_BT_EXT_ADV is not enabled or not supported by the controller it is not possible to scan and advertise simultaneously using two different random addresses.
Note: It is not possible to have multiple connectable advertising sets advertising simultaneously using different identities.

uint8_t sid¶

Advertising Set Identifier, valid range 0x00 - 0x0f.

Note: Requires BT_LE_ADV_OPT_EXT_ADV

uint8_t secondary_max_skip¶

Secondary channel maximum skip count.

Maximum advertising events the advertiser can skip before it must send advertising data on the secondary advertising channel.

Note: Requires BT_LE_ADV_OPT_EXT_ADV

uint32_t options¶: Bit-field of advertising options

uint32_t interval_min¶: Minimum Advertising Interval (N * 0.625)

uint32_t interval_max¶: Maximum Advertising Interval (N * 0.625)

const bt_addr_le_t *peer¶

Directed advertising to peer.

When this parameter is set the advertiser will send directed advertising to the remote device.

The advertising type will either be high duty cycle, or low duty cycle if the BT_LE_ADV_OPT_DIR_MODE_LOW_DUTY option is enabled. When using BT_LE_ADV_OPT_EXT_ADV then only low duty cycle is allowed.

In case of connectable high duty cycle if the connection could not be established within the timeout the connected() callback will be called with the status set to BT_HCI_ERR_ADV_TIMEOUT.

struct bt_le_per_adv_param¶

#include <bluetooth.h>

Public Members

uint16_t interval_min¶: Minimum Periodic Advertising Interval (N * 1.25 ms)

uint16_t interval_max¶: Maximum Periodic Advertising Interval (N * 1.25 ms)

uint32_t options¶: Bit-field of periodic advertising options

struct bt_le_ext_adv_start_param¶

#include <bluetooth.h>

Public Members

uint16_t timeout¶

Advertiser timeout (N * 10 ms).

Application will be notified by the advertiser sent callback. Set to zero for no timeout.

When using high duty cycle directed connectable advertising then this parameters must be set to a non-zero value less than or equal to the maximum of BT_GAP_ADV_HIGH_DUTY_CYCLE_MAX_TIMEOUT.

If privacy CONFIG_BT_PRIVACY is enabled then the timeout must be less than CONFIG_BT_RPA_TIMEOUT .

uint8_t num_events¶

Number of advertising events.

Application will be notified by the advertiser sent callback. Set to zero for no limit.

struct bt_le_ext_adv_info¶

#include <bluetooth.h>

Advertising set info structure.

Public Members

int8_t tx_power¶: Currently selected Transmit Power (dBM).

struct bt_le_per_adv_sync_synced_info¶

#include <bluetooth.h>

Public Members

const bt_addr_le_t *addr¶: Advertiser LE address and type.

uint8_t sid¶: Advertiser SID

uint16_t interval¶: Periodic advertising interval (N * 1.25 ms)

uint8_t phy¶: Advertiser PHY

bool recv_enabled¶: True if receiving periodic advertisements, false otherwise.

uint16_t service_data¶

Service Data provided by the peer when sync is transferred.

Will always be 0 when the sync is locally created.

struct bt_conn *conn¶

Peer that transferred the periodic advertising sync.

Will always be 0 when the sync is locally created.

struct bt_le_per_adv_sync_term_info¶

#include <bluetooth.h>

Public Members

const bt_addr_le_t *addr¶: Advertiser LE address and type.

uint8_t sid¶: Advertiser SID

struct bt_le_per_adv_sync_recv_info¶

#include <bluetooth.h>

Public Members

const bt_addr_le_t *addr¶: Advertiser LE address and type.

uint8_t sid¶: Advertiser SID

int8_t tx_power¶: The TX power of the advertisement.

int8_t rssi¶: The RSSI of the advertisement excluding any CTE.

uint8_t cte_type¶: The Constant Tone Extension (CTE) of the advertisement

struct bt_le_per_adv_sync_state_info¶

#include <bluetooth.h>

Public Members

bool recv_enabled¶: True if receiving periodic advertisements, false otherwise.

struct bt_le_per_adv_sync_cb¶

#include <bluetooth.h>

Public Members

void (*synced)(struct bt_le_per_adv_sync *sync, struct bt_le_per_adv_sync_synced_info *info)¶

The periodic advertising has been successfully synced.

This callback notifies the application that the periodic advertising set has been successfully synced, and will now start to receive periodic advertising reports.

Parameters

sync: The periodic advertising sync object.
info: Information about the sync event.

void (*term)(struct bt_le_per_adv_sync *sync, const struct bt_le_per_adv_sync_term_info *info)¶

The periodic advertising sync has been terminated.

This callback notifies the application that the periodic advertising sync has been terminated, either by local request, remote request or because due to missing data, e.g. by being out of range or sync.

Parameters

sync: The periodic advertising sync object.

void (*recv)(struct bt_le_per_adv_sync *sync, const struct bt_le_per_adv_sync_recv_info *info, struct net_buf_simple *buf)¶

Periodic advertising data received.

This callback notifies the application of an periodic advertising report.

Parameters

sync: The advertising set object.
info: Information about the periodic advertising event.
buf: Buffer containing the periodic advertising data.

void (*state_changed)(struct bt_le_per_adv_sync *sync, const struct bt_le_per_adv_sync_state_info *info)¶

The periodic advertising sync state has changed.

This callback notifies the application about changes to the sync state. Initialize sync and termination is handled by their individual callbacks, and won’t be notified here.

Parameters

sync: The periodic advertising sync object.
info: Information about the state change.

struct bt_le_per_adv_sync_param¶

#include <bluetooth.h>

Public Members

bt_addr_le_t addr¶

Periodic Advertiser Address.

Only valid if not using the periodic advertising list

uint8_t sid¶

Advertiser SID.

Only valid if not using the periodic advertising list

uint32_t options¶: Bit-field of periodic advertising sync options.

uint16_t skip¶

Maximum event skip.

Maximum number of periodic advertising events that can be skipped after a successful receive

uint16_t timeout¶

Synchronization timeout (N * 10 ms)

Synchronization timeout for the periodic advertising sync. Range 0x000A to 0x4000 (100 ms to 163840 ms)

struct bt_le_per_adv_sync_transfer_param¶

#include <bluetooth.h>

Public Members

uint16_t skip¶

Maximum event skip.

The number of periodic advertising packets that can be skipped after a successful receive.

uint16_t timeout¶

Synchronization timeout (N * 10 ms)

Synchronization timeout for the periodic advertising sync. Range 0x000A to 0x4000 (100 ms to 163840 ms)

uint32_t options¶: Periodic Advertising Sync Transfer options

struct bt_le_scan_param¶

#include <bluetooth.h>

LE scan parameters

Public Members

uint8_t type¶: Scan type (BT_LE_SCAN_TYPE_ACTIVE or BT_LE_SCAN_TYPE_PASSIVE)

uint16_t interval¶: Scan interval (N * 0.625 ms)

uint16_t window¶: Scan window (N * 0.625 ms)

uint16_t timeout¶

Scan timeout (N * 10 ms)

Application will be notified by the scan timeout callback. Set zero to disable timeout.

uint16_t interval_coded¶

Scan interval LE Coded PHY (N * 0.625 MS)

Set zero to use same as LE 1M PHY scan interval.

uint16_t window_coded¶

Scan window LE Coded PHY (N * 0.625 MS)

Set zero to use same as LE 1M PHY scan window.

struct bt_le_scan_recv_info¶

#include <bluetooth.h>

LE advertisement packet information

Public Members

const bt_addr_le_t *addr¶

Advertiser LE address and type.

If advertiser is anonymous then this address will be BT_ADDR_LE_ANY.

uint8_t sid¶: Advertising Set Identifier.

int8_t rssi¶: Strength of advertiser signal.

int8_t tx_power¶: Transmit power of the advertiser.

uint8_t adv_type¶: Advertising packet type.

uint16_t adv_props¶: Advertising packet properties.

uint16_t interval¶

Periodic advertising interval.

If 0 there is no periodic advertising.

uint8_t primary_phy¶: Primary advertising channel PHY.

uint8_t secondary_phy¶: Secondary advertising channel PHY.

struct bt_le_scan_cb¶

#include <bluetooth.h>

Listener context for (LE) scanning.

Public Members

void (*recv)(const struct bt_le_scan_recv_info *info, struct net_buf_simple *buf)¶

Advertisement packet received callback.

Parameters

info: Advertiser packet information.
buf: Buffer containing advertiser data.

void (*timeout)(void)¶: The scanner has stopped scanning after scan timeout.

struct bt_le_oob_sc_data¶

#include <bluetooth.h>

LE Secure Connections pairing Out of Band data.

Public Members

uint8_t r[16]¶: Random Number.

uint8_t c[16]¶: Confirm Value.

struct bt_le_oob¶

#include <bluetooth.h>

LE Out of Band information.

Public Members

bt_addr_le_t addr¶: LE address. If privacy is enabled this is a Resolvable Private Address.

struct bt_le_oob_sc_data le_sc_data¶: LE Secure Connections pairing Out of Band data.

struct bt_br_discovery_result¶

#include <bluetooth.h>

BR/EDR discovery result structure.

Public Members

bt_addr_t addr¶: Remote device address

int8_t rssi¶: RSSI from inquiry

uint8_t cod[3]¶: Class of Device

uint8_t eir[240]¶: Extended Inquiry Response

struct bt_br_discovery_param¶

#include <bluetooth.h>

BR/EDR discovery parameters

Public Members

uint8_t length¶: Maximum length of the discovery in units of 1.28 seconds. Valid range is 0x01 - 0x30.

bool limited¶: True if limited discovery procedure is to be used.

struct bt_br_oob¶

#include <bluetooth.h>

Public Members

bt_addr_t addr¶: BR/EDR address.

struct bt_bond_info¶

#include <bluetooth.h>

Information about a bond with a remote device.

Public Members

bt_addr_le_t addr¶: Address of the remote device.

group bt_addr

Bluetooth device address definitions and utilities.

Defines

BT_ADDR_LE_PUBLIC¶

BT_ADDR_LE_RANDOM¶

BT_ADDR_LE_PUBLIC_ID¶

BT_ADDR_LE_RANDOM_ID¶

BT_ADDR_ANY¶

BT_ADDR_NONE¶

BT_ADDR_LE_ANY¶

BT_ADDR_LE_NONE¶

BT_ADDR_IS_RPA(a)¶

BT_ADDR_IS_NRPA(a)¶

BT_ADDR_IS_STATIC(a)¶

BT_ADDR_SET_RPA(a)¶

BT_ADDR_SET_NRPA(a)¶

BT_ADDR_SET_STATIC(a)¶

Functions

int bt_addr_cmp(const bt_addr_t *a, const bt_addr_t *b)¶

int bt_addr_le_cmp(const bt_addr_le_t *a, const bt_addr_le_t *b)¶

void bt_addr_copy(bt_addr_t *dst, const bt_addr_t *src)¶

void bt_addr_le_copy(bt_addr_le_t *dst, const bt_addr_le_t *src)¶

int bt_addr_le_create_nrpa(bt_addr_le_t *addr)¶

int bt_addr_le_create_static(bt_addr_le_t *addr)¶

bool bt_addr_le_is_rpa(const bt_addr_le_t *addr)¶

bool bt_addr_le_is_identity(const bt_addr_le_t *addr)¶

struct bt_addr_t¶: #include <addr.h>
Bluetooth Device Address

struct bt_addr_le_t¶: #include <addr.h>
Bluetooth LE Device Address

group bt_gap_defines

Bluetooth Generic Access Profile defines and Assigned Numbers.

Defines

BT_COMP_ID_LF¶: Company Identifiers (see Bluetooth Assigned Numbers)

BT_DATA_FLAGS¶: EIR/AD data type definitions

BT_DATA_UUID16_SOME¶

BT_DATA_UUID16_ALL¶

BT_DATA_UUID32_SOME¶

BT_DATA_UUID32_ALL¶

BT_DATA_UUID128_SOME¶

BT_DATA_UUID128_ALL¶

BT_DATA_NAME_SHORTENED¶

BT_DATA_NAME_COMPLETE¶

BT_DATA_TX_POWER¶

BT_DATA_SM_TK_VALUE¶

BT_DATA_SM_OOB_FLAGS¶

BT_DATA_SOLICIT16¶

BT_DATA_SOLICIT128¶

BT_DATA_SVC_DATA16¶

BT_DATA_GAP_APPEARANCE¶

BT_DATA_LE_BT_DEVICE_ADDRESS¶

BT_DATA_LE_ROLE¶

BT_DATA_SOLICIT32¶

BT_DATA_SVC_DATA32¶

BT_DATA_SVC_DATA128¶

BT_DATA_LE_SC_CONFIRM_VALUE¶

BT_DATA_LE_SC_RANDOM_VALUE¶

BT_DATA_URI¶

BT_DATA_MESH_PROV¶

BT_DATA_MESH_MESSAGE¶

BT_DATA_MESH_BEACON¶

BT_DATA_MANUFACTURER_DATA¶

BT_LE_AD_LIMITED¶

BT_LE_AD_GENERAL¶

BT_LE_AD_NO_BREDR¶

BT_GAP_SCAN_FAST_INTERVAL¶

BT_GAP_SCAN_FAST_WINDOW¶

BT_GAP_SCAN_SLOW_INTERVAL_1¶

BT_GAP_SCAN_SLOW_WINDOW_1¶

BT_GAP_SCAN_SLOW_INTERVAL_2¶

BT_GAP_SCAN_SLOW_WINDOW_2¶

BT_GAP_ADV_FAST_INT_MIN_1¶

BT_GAP_ADV_FAST_INT_MAX_1¶

BT_GAP_ADV_FAST_INT_MIN_2¶

BT_GAP_ADV_FAST_INT_MAX_2¶

BT_GAP_ADV_SLOW_INT_MIN¶

BT_GAP_ADV_SLOW_INT_MAX¶

BT_GAP_INIT_CONN_INT_MIN¶

BT_GAP_INIT_CONN_INT_MAX¶

BT_GAP_ADV_MAX_ADV_DATA_LEN¶: Maximum advertising data length.

BT_GAP_ADV_MAX_EXT_ADV_DATA_LEN¶

Maximum extended advertising data length.

Note: The maximum advertising data length that can be sent by an extended advertiser is defined by the controller.

BT_GAP_TX_POWER_INVALID¶

BT_GAP_RSSI_INVALID¶

BT_GAP_SID_INVALID¶

BT_GAP_NO_TIMEOUT¶

BT_GAP_ADV_HIGH_DUTY_CYCLE_MAX_TIMEOUT¶

BT_GAP_DATA_LEN_DEFAULT¶

BT_GAP_DATA_LEN_MAX¶

BT_GAP_DATA_TIME_DEFAULT¶

BT_GAP_DATA_TIME_MAX¶

BT_GAP_SID_MAX¶

BT_GAP_PER_ADV_MAX_MAX_SKIP¶

BT_GAP_PER_ADV_MAX_MAX_TIMEOUT¶

Enums

enum [anonymous]¶

LE PHY types

Values:

enumerator BT_GAP_LE_PHY_NONE¶: Convenience macro for when no PHY is set.

enumerator BT_GAP_LE_PHY_1M¶: LE 1M PHY

enumerator BT_GAP_LE_PHY_2M¶: LE 2M PHY

enumerator BT_GAP_LE_PHY_CODED¶: LE Coded PHY

enum [anonymous]¶

Advertising PDU types

Values:

enumerator BT_GAP_ADV_TYPE_ADV_IND¶: Scannable and connectable advertising.

enumerator BT_GAP_ADV_TYPE_ADV_DIRECT_IND¶: Directed connectable advertising.

enumerator BT_GAP_ADV_TYPE_ADV_SCAN_IND¶: Non-connectable and scannable advertising.

enumerator BT_GAP_ADV_TYPE_ADV_NONCONN_IND¶: Non-connectable and non-scannable advertising.

enumerator BT_GAP_ADV_TYPE_SCAN_RSP¶: Additional advertising data requested by an active scanner.

enumerator BT_GAP_ADV_TYPE_EXT_ADV¶: Extended advertising, see advertising properties.

enum [anonymous]¶

Advertising PDU properties

Values:

enumerator BT_GAP_ADV_PROP_CONNECTABLE¶: Connectable advertising.

enumerator BT_GAP_ADV_PROP_SCANNABLE¶: Scannable advertising.

enumerator BT_GAP_ADV_PROP_DIRECTED¶: Directed advertising.

enumerator BT_GAP_ADV_PROP_SCAN_RESPONSE¶: Additional advertising data requested by an active scanner.

enumerator BT_GAP_ADV_PROP_EXT_ADV¶: Extended advertising.

enum [anonymous]¶

Constant Tone Extension (CTE) types

Values:

enumerator BT_GAP_CTE_AOA¶: Angle of Arrival

enumerator BT_GAP_CTE_AOD_1US¶: Angle of Departure with 1 us slots

enumerator BT_GAP_CTE_AOD_2US¶: Angle of Departure with 2 us slots

enumerator BT_GAP_CTE_NONE¶: No extensions