-
CONFIG_UART_PSOC6_UART_5
¶
Enable PSOC6 SCB6 as UART_5 on Port 5
Type: bool
Help¶
Enable support for UART_5 on port 5 in the driver.
Direct dependencies¶
(UART_PSOC6
&& (BOARD_CY8CKIT_062_BLE_M0
|| BOARD_CY8CKIT_062_BLE_M4
)) || (UART_PSOC6
&& (BOARD_CY8CKIT_062_WIFI_BT_M0
|| BOARD_CY8CKIT_062_WIFI_BT_M4
)) || (UART_PSOC6
&& SERIAL
)
(Includes any dependencies from ifs and menus.)
Defaults¶
y
y
Kconfig definitions¶
At <Zephyr>/boards/arm/cy8ckit_062_ble/Kconfig.defconfig:14
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:24
Menu path: (Top)
config UART_PSOC6_UART_5 bool default y depends onUART_PSOC6
&& (BOARD_CY8CKIT_062_BLE_M0
||BOARD_CY8CKIT_062_BLE_M4
)
At <Zephyr>/boards/arm/cy8ckit_062_wifi_bt/Kconfig.defconfig:13
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:24
Menu path: (Top)
config UART_PSOC6_UART_5 bool default y depends onUART_PSOC6
&& (BOARD_CY8CKIT_062_WIFI_BT_M0
||BOARD_CY8CKIT_062_WIFI_BT_M4
)
At <Zephyr>/drivers/serial/Kconfig.psoc6:13
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:32
→ <Zephyr>/drivers/Kconfig:24
→ <Zephyr>/drivers/serial/Kconfig:117
Menu path: (Top) → Device Drivers → Serial Drivers → PSoC6 MCU serial driver
config UART_PSOC6_UART_5 bool "Enable PSOC6 SCB6 as UART_5 on Port 5" depends onUART_PSOC6
&&SERIAL
help Enable support for UART_5 on port 5 in the driver.
(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)