Help¶

This option enables the UART driver for NXP i.MX7 family processors.

Direct dependencies¶

(SERIAL && SOC_MCIMX6X_M4 && SOC_SERIES_IMX_6X_M4) || (SERIAL && SOC_MCIMX7_M4 && SOC_SERIES_IMX7_M4) || (HAS_IMX_HAL && SERIAL)

(Includes any dependencies from ifs and menus.)

Defaults¶

y
y

Symbols selected by this symbol¶

Kconfig definitions¶

At <Zephyr>/soc/arm/nxp_imx/mcimx6x_m4/Kconfig.defconfig.mcimx6x_m4:18

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <BuildDir>/Kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/arm/nxp_imx/Kconfig.defconfig:4 → <Zephyr>/soc/arm/nxp_imx/mcimx6x_m4/Kconfig.defconfig.series:15

Menu path: (Top)

config UART_IMX
    bool
    default y
    depends on SERIAL && SOC_MCIMX6X_M4 && SOC_SERIES_IMX_6X_M4

At <Zephyr>/soc/arm/nxp_imx/mcimx7_m4/Kconfig.defconfig.mcimx7_m4:21

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <BuildDir>/Kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/arm/nxp_imx/Kconfig.defconfig:4 → <Zephyr>/soc/arm/nxp_imx/mcimx7_m4/Kconfig.defconfig.series:15

Menu path: (Top)

config UART_IMX
    bool
    default y
    depends on SERIAL && SOC_MCIMX7_M4 && SOC_SERIES_IMX7_M4

At <Zephyr>/drivers/serial/Kconfig.imx:6

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:32 → <Zephyr>/drivers/Kconfig:24 → <Zephyr>/drivers/serial/Kconfig:81

Menu path: (Top) → Device Drivers → Serial Drivers

config UART_IMX
    bool "NXP i.MX7 family processor UART driver"
    select SERIAL_HAS_DRIVER
    select SERIAL_SUPPORT_INTERRUPT
    depends on HAS_IMX_HAL && SERIAL
    help
      This option enables the UART driver for NXP i.MX7
      family processors.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)