CONFIG_SOC_ATMEL_SAME70_PLLA_MULA

PLL MULA

Type: int

Help

This is the multiplier MULA used by the PLL. The processor clock is (MAINCK * (MULA + 1) / DIVA).

Board config file can override this settings for a particular board.

Setting MULA=0 would disable PLL at boot, this is currently not supported.

With default of MULA == 24, and DIVA == 1, PLL is running at 25 times the main clock frequency.

Direct dependencies

SOC_SERIES_SAME70 && SOC_FAMILY_SAM

(Includes any dependencies from ifs and menus.)

Default

  • 24

Kconfig definition

At <Zephyr>/soc/arm/atmel_sam/same70/Kconfig.soc:116

Included via <Zephyr>/Kconfig:8<Zephyr>/Kconfig.zephyr:28<Zephyr>/soc/Kconfig:11<BuildDir>/Kconfig/Kconfig.soc.arch:2<Zephyr>/soc/arm/atmel_sam/Kconfig:17

Menu path: (Top) → Hardware Configuration

config SOC_ATMEL_SAME70_PLLA_MULA
    int "PLL MULA"
    range 1 62
    default 24
    depends on SOC_SERIES_SAME70 && SOC_FAMILY_SAM
    help
      This is the multiplier MULA used by the PLL.
      The processor clock is (MAINCK * (MULA + 1) / DIVA).

      Board config file can override this settings
      for a particular board.

      Setting MULA=0 would disable PLL at boot, this is currently
      not supported.

      With default of MULA == 24, and DIVA == 1,
      PLL is running at 25 times the main clock frequency.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)