Help¶

P0.9 and P0.10 are usually reserved for NFC. This option switch them to normal GPIO mode. HW enabling happens once in the device lifetime, during the first system startup. Disabling this option will not switch back these pins to NFCT mode. Doing this requires UICR erase prior to flashing device using the image which has this option disabled.

Direct dependencies¶

HAS_HW_NRF_NFCT && SOC_FAMILY_NRF

(Includes any dependencies from ifs and menus.)

Defaults¶

No defaults. Implicitly defaults to n.

Kconfig definition¶

At <Zephyr>/soc/arm/nordic_nrf/nrf52/Kconfig.soc:462

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:28 → <Zephyr>/soc/Kconfig:11 → <BuildDir>/Kconfig/Kconfig.soc.arch:2 → <Zephyr>/soc/arm/nordic_nrf/Kconfig:17

Menu path: (Top) → Hardware Configuration

config NFCT_PINS_AS_GPIOS
    bool "NFCT pins as GPIOs"
    depends on HAS_HW_NRF_NFCT && SOC_FAMILY_NRF
    help
      P0.9 and P0.10 are usually reserved for NFC. This option switch
      them to normal GPIO mode. HW enabling happens once in the device
      lifetime, during the first system startup. Disabling this option will
      not switch back these pins to NFCT mode. Doing this requires UICR
      erase prior to flashing device using the image which has
      this option disabled.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)