-
CONFIG_KSCAN_FT5336_INTERRUPT
¶
Enable interrupt
Type: bool
Help¶
Enable interrupt support (requires GPIO).
Direct dependencies¶
(KSCAN
&& DISPLAY
&& SHIELD_ADAFRUIT_2_8_TFT_TOUCH_V2
) || (KSCAN
&& DISPLAY
&& SHIELD_BUYDISPLAY_2_8_TFT_TOUCH_ARDUINO
) || (KSCAN
&& DISPLAY
&& SHIELD_BUYDISPLAY_3_5_TFT_TOUCH_ARDUINO
) || (KSCAN
&& (BOARD_MIMXRT1050_EVK
|| BOARD_MIMXRT1050_EVK_QSPI
)) || (KSCAN
&& (BOARD_MIMXRT1060_EVK
|| BOARD_MIMXRT1060_EVK_HYPERFLASH
)) || (KSCAN
&& BOARD_MIMXRT1064_EVK
) || (KSCAN
&& DISPLAY
&& SHIELD_ADAFRUIT_2_8_TFT_TOUCH_V2
) || (KSCAN
&& DISPLAY
&& SHIELD_BUYDISPLAY_2_8_TFT_TOUCH_ARDUINO
) || (KSCAN
&& DISPLAY
&& SHIELD_BUYDISPLAY_3_5_TFT_TOUCH_ARDUINO
) || (KSCAN_FT5336
&& KSCAN
)
(Includes any dependencies from ifs and menus.)
Defaults¶
n
n
n
y
y
y
n
n
n
Kconfig definitions¶
At <Zephyr>/boards/shields/adafruit_2_8_tft_touch_v2/Kconfig.defconfig:23
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:23
→ <BuildDir>/Kconfig/Kconfig.shield.defconfig:1
Menu path: (Top)
config KSCAN_FT5336_INTERRUPT bool default n depends onKSCAN
&&DISPLAY
&&SHIELD_ADAFRUIT_2_8_TFT_TOUCH_V2
At <Zephyr>/boards/shields/buydisplay_2_8_tft_touch_arduino/Kconfig.defconfig:23
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:23
→ <BuildDir>/Kconfig/Kconfig.shield.defconfig:1
Menu path: (Top)
config KSCAN_FT5336_INTERRUPT bool default n depends onKSCAN
&&DISPLAY
&&SHIELD_BUYDISPLAY_2_8_TFT_TOUCH_ARDUINO
At <Zephyr>/boards/shields/buydisplay_3_5_tft_touch_arduino/Kconfig.defconfig:23
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:23
→ <BuildDir>/Kconfig/Kconfig.shield.defconfig:1
Menu path: (Top)
config KSCAN_FT5336_INTERRUPT bool default n depends onKSCAN
&&DISPLAY
&&SHIELD_BUYDISPLAY_3_5_TFT_TOUCH_ARDUINO
At <Zephyr>/boards/arm/mimxrt1050_evk/Kconfig.defconfig:34
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:24
Menu path: (Top)
config KSCAN_FT5336_INTERRUPT bool default y depends onKSCAN
&& (BOARD_MIMXRT1050_EVK
||BOARD_MIMXRT1050_EVK_QSPI
)
At <Zephyr>/boards/arm/mimxrt1060_evk/Kconfig.defconfig:31
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:24
Menu path: (Top)
config KSCAN_FT5336_INTERRUPT bool default y depends onKSCAN
&& (BOARD_MIMXRT1060_EVK
||BOARD_MIMXRT1060_EVK_HYPERFLASH
)
At <Zephyr>/boards/arm/mimxrt1064_evk/Kconfig.defconfig:30
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:24
Menu path: (Top)
config KSCAN_FT5336_INTERRUPT bool default y depends onKSCAN
&&BOARD_MIMXRT1064_EVK
At <Zephyr>/boards/shields/adafruit_2_8_tft_touch_v2/Kconfig.defconfig:23
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:24
Menu path: (Top)
config KSCAN_FT5336_INTERRUPT bool default n depends onKSCAN
&&DISPLAY
&&SHIELD_ADAFRUIT_2_8_TFT_TOUCH_V2
At <Zephyr>/boards/shields/buydisplay_2_8_tft_touch_arduino/Kconfig.defconfig:23
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:24
Menu path: (Top)
config KSCAN_FT5336_INTERRUPT bool default n depends onKSCAN
&&DISPLAY
&&SHIELD_BUYDISPLAY_2_8_TFT_TOUCH_ARDUINO
At <Zephyr>/boards/shields/buydisplay_3_5_tft_touch_arduino/Kconfig.defconfig:23
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:24
Menu path: (Top)
config KSCAN_FT5336_INTERRUPT bool default n depends onKSCAN
&&DISPLAY
&&SHIELD_BUYDISPLAY_3_5_TFT_TOUCH_ARDUINO
At <Zephyr>/drivers/kscan/Kconfig.ft5336:22
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:32
→ <Zephyr>/drivers/Kconfig:94
→ <Zephyr>/drivers/kscan/Kconfig:13
Menu path: (Top) → Device Drivers → Keyboard Scan Drivers → FT5XX6/FT6XX6 capacitive touch panel driver
config KSCAN_FT5336_INTERRUPT bool "Enable interrupt" depends onKSCAN_FT5336
&&KSCAN
help Enable interrupt support (requires GPIO).
(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)