Help¶

Set the initialization priority number. Do not mess with it unless you know what you are doing. Beware mcr20a requires gpio and spi to be ready first (and sometime gpio should be the very first as spi might need it too). And of course it has to start before the net stack.

Direct dependencies¶

IEEE802154_MCR20A && IEEE802154

(Includes any dependencies from ifs and menus.)

Default¶

80

Kconfig definition¶

At <Zephyr>/drivers/ieee802154/Kconfig.mcr20a:69

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:32 → <Zephyr>/drivers/Kconfig:10 → <Zephyr>/drivers/ieee802154/Kconfig:64

Menu path: (Top) → Device Drivers → IEEE 802.15.4 drivers options → NXP MCR20A Driver support

config IEEE802154_MCR20A_INIT_PRIO
    int "MCR20A initialization priority"
    default 80
    depends on IEEE802154_MCR20A && IEEE802154
    help
      Set the initialization priority number. Do not mess with it unless
      you know what you are doing. Beware mcr20a requires gpio and spi to
      be ready first (and sometime gpio should be the very first as spi
      might need it too). And of course it has to start before the net stack.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)