Help¶

Set the initialization priority number. Do not mess with it unless you know what you are doing. Beware cc2520 requires gpio and spi to be ready first (and sometime gpio should be the very first as spi might need it too). And of course it has to start before the net stack.

Direct dependencies¶

IEEE802154_CC2520 && IEEE802154

(Includes any dependencies from ifs and menus.)

Default¶

80

Kconfig definition¶

At <Zephyr>/drivers/ieee802154/Kconfig.cc2520:26

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:32 → <Zephyr>/drivers/Kconfig:10 → <Zephyr>/drivers/ieee802154/Kconfig:60

Menu path: (Top) → Device Drivers → IEEE 802.15.4 drivers options → TI CC2520 Driver support

config IEEE802154_CC2520_INIT_PRIO
    int "CC2520 initialization priority"
    default 80
    depends on IEEE802154_CC2520 && IEEE802154
    help
      Set the initialization priority number. Do not mess with it unless
      you know what you are doing. Beware cc2520 requires gpio and spi to
      be ready first (and sometime gpio should be the very first as spi
      might need it too). And of course it has to start before the net stack.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)