Help¶

Internal address of the EEPROM chip where the MAC address is stored. Chips with 1 to 4 byte internal address size are supported. Address size has to be configured in a separate Kconfig option.

Direct dependencies¶

(ETH_SAM_GMAC && BOARD_SAM_E70_XPLAINED) || (ETH_SAM_GMAC && BOARD_SAM_V71_XULT) || (ETH_SAM_GMAC_MAC_I2C_EEPROM && ETH_SAM_GMAC && NET_L2_ETHERNET)

(Includes any dependencies from ifs and menus.)

Defaults¶

0x9A
0x9A

Kconfig definitions¶

At <Zephyr>/boards/arm/sam_e70_xplained/Kconfig.defconfig:18

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:24

Menu path: (Top)

config ETH_SAM_GMAC_MAC_I2C_INT_ADDRESS
    hex
    default 0x9A
    depends on ETH_SAM_GMAC && BOARD_SAM_E70_XPLAINED

At <Zephyr>/boards/arm/sam_v71_xult/Kconfig.defconfig:22

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:24

Menu path: (Top)

config ETH_SAM_GMAC_MAC_I2C_INT_ADDRESS
    hex
    default 0x9A
    depends on ETH_SAM_GMAC && BOARD_SAM_V71_XULT

At <Zephyr>/drivers/ethernet/Kconfig.sam_gmac:92

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:32 → <Zephyr>/drivers/Kconfig:20 → <Zephyr>/drivers/ethernet/Kconfig:51

Menu path: (Top) → Device Drivers → Ethernet Drivers → Atmel SAM Ethernet driver → Read from an I2C EEPROM

config ETH_SAM_GMAC_MAC_I2C_INT_ADDRESS
    hex "I2C EEPROM internal address"
    range 0 0xffffffff
    depends on ETH_SAM_GMAC_MAC_I2C_EEPROM && ETH_SAM_GMAC && NET_L2_ETHERNET
    help
      Internal address of the EEPROM chip where the MAC address is stored.
      Chips with 1 to 4 byte internal address size are supported. Address
      size has to be configured in a separate Kconfig option.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)