Direct dependencies¶

CLOCK_CONTROL_NRF && CLOCK_CONTROL

(Includes any dependencies from ifs and menus.)

Defaults¶

500 if CLOCK_CONTROL_NRF_K32SRC_500PPM
250 if CLOCK_CONTROL_NRF_K32SRC_250PPM
150 if CLOCK_CONTROL_NRF_K32SRC_150PPM
100 if CLOCK_CONTROL_NRF_K32SRC_100PPM
75 if CLOCK_CONTROL_NRF_K32SRC_75PPM
50 if CLOCK_CONTROL_NRF_K32SRC_50PPM
30 if CLOCK_CONTROL_NRF_K32SRC_30PPM
20 if CLOCK_CONTROL_NRF_K32SRC_20PPM

Kconfig definition¶

At <Zephyr>/drivers/clock_control/Kconfig.nrf:157

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:32 → <Zephyr>/drivers/Kconfig:54 → <Zephyr>/drivers/clock_control/Kconfig:23

Menu path: (Top) → Device Drivers → Hardware clock controller support → NRF Clock controller support

config CLOCK_CONTROL_NRF_ACCURACY
    int
    default 500 if CLOCK_CONTROL_NRF_K32SRC_500PPM
    default 250 if CLOCK_CONTROL_NRF_K32SRC_250PPM
    default 150 if CLOCK_CONTROL_NRF_K32SRC_150PPM
    default 100 if CLOCK_CONTROL_NRF_K32SRC_100PPM
    default 75 if CLOCK_CONTROL_NRF_K32SRC_75PPM
    default 50 if CLOCK_CONTROL_NRF_K32SRC_50PPM
    default 30 if CLOCK_CONTROL_NRF_K32SRC_30PPM
    default 20 if CLOCK_CONTROL_NRF_K32SRC_20PPM
    depends on CLOCK_CONTROL_NRF && CLOCK_CONTROL

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)