Help¶

Enable support for mcux flexcan driver.

Direct dependencies¶

(CAN && SOC_SERIES_IMX_RT) || (CAN && SOC_MK64F12 && SOC_SERIES_KINETIS_K6X) || (CAN && SOC_MKE16F16 && SOC_SERIES_KINETIS_KE1XF) || (CAN && SOC_MKE18F16 && SOC_SERIES_KINETIS_KE1XF) || (HAS_MCUX_FLEXCAN && CLOCK_CONTROL && CAN)

(Includes any dependencies from ifs and menus.)

Defaults¶

y if HAS_MCUX_FLEXCAN
y
y
y

Kconfig definitions¶

At <Zephyr>/soc/arm/nxp_imx/rt/Kconfig.defconfig.series:14

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <BuildDir>/Kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/arm/nxp_imx/Kconfig.defconfig:4

Menu path: (Top)

config CAN_MCUX_FLEXCAN
    bool
    default y if HAS_MCUX_FLEXCAN
    depends on CAN && SOC_SERIES_IMX_RT

At <Zephyr>/soc/arm/nxp_kinetis/k6x/Kconfig.defconfig.mk64f12:19

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <BuildDir>/Kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/arm/nxp_kinetis/Kconfig.defconfig:3 → <Zephyr>/soc/arm/nxp_kinetis/k6x/Kconfig.defconfig.series:26

Menu path: (Top)

config CAN_MCUX_FLEXCAN
    bool
    default y
    depends on CAN && SOC_MK64F12 && SOC_SERIES_KINETIS_K6X

At <Zephyr>/soc/arm/nxp_kinetis/ke1xf/Kconfig.defconfig.mke16f16:11

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <BuildDir>/Kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/arm/nxp_kinetis/Kconfig.defconfig:3 → <Zephyr>/soc/arm/nxp_kinetis/ke1xf/Kconfig.defconfig.series:92

Menu path: (Top)

config CAN_MCUX_FLEXCAN
    bool
    default y
    depends on CAN && SOC_MKE16F16 && SOC_SERIES_KINETIS_KE1XF

At <Zephyr>/soc/arm/nxp_kinetis/ke1xf/Kconfig.defconfig.mke18f16:11

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <BuildDir>/Kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/arm/nxp_kinetis/Kconfig.defconfig:3 → <Zephyr>/soc/arm/nxp_kinetis/ke1xf/Kconfig.defconfig.series:92

Menu path: (Top)

config CAN_MCUX_FLEXCAN
    bool
    default y
    depends on CAN && SOC_MKE18F16 && SOC_SERIES_KINETIS_KE1XF

At <Zephyr>/drivers/can/Kconfig.mcux:6

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:32 → <Zephyr>/drivers/Kconfig:80 → <Zephyr>/drivers/can/Kconfig:61

Menu path: (Top) → Device Drivers → CAN Drivers

config CAN_MCUX_FLEXCAN
    bool "MCUX FlexCAN driver"
    depends on HAS_MCUX_FLEXCAN && CLOCK_CONTROL && CAN
    help
      Enable support for mcux flexcan driver.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)