CONFIG_BT_MESH_LIGHT_CTRL_SRV_OCCUPANCY_MODE

Initial occupancy mode

Type: bool

Help

If occupancy mode is enabled, lights will turn on when motion is detected. If occupancy mode is disabled, motion may only postpone dimming of lights that have been manually turned on. May be reconfigured at runtime by other models in the mesh network.

Direct dependencies

BT_MESH_LIGHT_CTRL_SRV && BT_MESH && BT

(Includes any dependencies from ifs and menus.)

Defaults

No defaults. Implicitly defaults to n.

Kconfig definition

At <nRF>/subsys/bluetooth/mesh/Kconfig.models:364

Included via <Zephyr>/Kconfig:8<Zephyr>/Kconfig.zephyr:9<BuildDir>/Kconfig/Kconfig.modules:1<nRF>/Kconfig.nrf:25<nRF>/subsys/Kconfig:10<nRF>/subsys/bluetooth/Kconfig:30<nRF>/subsys/bluetooth/mesh/Kconfig:11

Menu path: (Top) → Modules → Nordic nRF Connect → Bluetooth Low Energy → Bluetooth Mesh → nRF BT Mesh Models → Light Lightness Control (LC) Server

config BT_MESH_LIGHT_CTRL_SRV_OCCUPANCY_MODE
    bool "Initial occupancy mode"
    depends on BT_MESH_LIGHT_CTRL_SRV && BT_MESH && BT
    help
      If occupancy mode is enabled, lights will turn on when motion is
      detected. If occupancy mode is disabled, motion may only postpone
      dimming of lights that have been manually turned on. May be
      reconfigured at runtime by other models in the mesh network.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)